search

Pixelcontroller / f16v4_issues

F16V4 and F48V4 Issue Tracker
14 stars 0 forks source link

Problem of upgrading in all versions #44

Closed ScarpelliniStefano96 closed 12 months ago

ScarpelliniStefano96 commented 1 year ago

Hi. I received from a store a f16v4. When I first turned it on I turned it on with ethernet and connected. I set up wifi and it gave me an ip address. But when I connect I get "Error Page (ESP) 004". I then, on the advice of a person in a forum, tried updating the firmware to version 26 via the web interface. At startup, bootloader v1.02 16 appears, then loads CPU1, CPU2 and then writes starting and the Falcon logo appears and stays still. I tried with the SD to put version 21 (as it was originally): it copied my files, it does the same process but the screen remains black and does nothing else. I try also with version 3. Is there anything I can do? i also take a dat file, if it is helping you.https://drive.google.com/file/d/1qjkBX6WYbW_s5G647eLmeCmHTgPJKfMC/view?usp=sharing

keithsw1111 commented 1 year ago

Build 21 is likely not compatible with your board. Over time there are small variations between boards such that more recent boards need the latest firmware to even function at all. That would explain the black screen.

If it gets stuck at the logo on boot do the power on again and hold down the select button. This should clear any corrupt settings.

ScarpelliniStefano96 commented 1 year ago

When i receive it the build id is 21, i remember. Tomorrow i try to do the sel pression like you tell me. If it doesn't work?

ScarpelliniStefano96 commented 1 year ago

Hi. One news: i contacted the store where i bought the f16v4 and he tell me that the build installed is 27. Where can i find It?

Stefano

Il dom 20 ago 2023, 20:35 Stefano Scarpellini < @.***> ha scritto:

Tomorrow i try. If select doesn't work?

Stefano

Il dom 20 ago 2023, 20:01 Keith Westley @.***> ha scritto:

Build 21 is likely not compatible with your board. Over time there are small variations between boards such that more recent boards need the latest firmware to even function at all. That would explain the black screen.

If it gets stuck at the logo on boot do the power on again and hold down the select button. This should clear any corrupt settings.

— Reply to this email directly, view it on GitHub https://github.com/Pixelcontroller/f16v4_issues/issues/44#issuecomment-1685354723, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3E6YBM4FFRGYRDB62ARHKTXWJGIVANCNFSM6AAAAAA3XNHRIA . You are receiving this because you authored the thread.Message ID: @.***>

keithsw1111 commented 1 year ago

I uploaded it into this github earlier today.

keithsw1111 commented 12 months ago

Did it work?

ScarpelliniStefano96 commented 12 months ago

It works. Thanks.

Stefano

Il ven 25 ago 2023, 11:45 Keith Westley @.***> ha scritto:

Did it work?

— Reply to this email directly, view it on GitHub https://github.com/Pixelcontroller/f16v4_issues/issues/44#issuecomment-1693088451, or unsubscribe https://github.com/notifications/unsubscribe-auth/A3E6YBPRVIPOMZNU6SUKCL3XXBX3DANCNFSM6AAAAAA3XNHRIA . You are receiving this because you authored the thread.Message ID: @.***>