Closed roque-canales closed 9 years ago
There is a MAVLINK message(MAVLINK_MSG_ID_RC_CHANNELS) which contains 18 channels value. Will check if it works with OSD.
Hello rent, I check your code, and you handle only 8 channels, please update it quickly we absolutely need to be able to use channel 15 and 16 please.
we are able to test your update ASAP
Hi, I have built a testing firmware and tested with my T8FG using ch9 and ch10 as switch channel. Please update the custom firmware and set the switch channel at CT. http://www.playuav.com/download/playuavosd/prerelease/PlayuavOSD_ch16.hex
FYI, there is no checking about Config Tool, it means you can input any value from 1 to 16. It is a bug and should add verify codes:-)
Perfect Rentt!!!
So now it work for switch camera on channel 15 an 16.
But no work for panel change, could you please add same thing for panel switch?
Like this all will be perfect!
I have added the same codes for panel switching. Now you can update the firmware with the CT(also should be updated). Looking forward your testing.
I think you forgot something... panel switching still no work...
It's working...
Pefect, Panel switching is ok from ch 9- 16.
Merhaba, bir test ürün yazılımı oluşturdum ve anahtar kanalı olarak ch9 ve ch10 kullanarak T8FG ile test ettim. Lütfen özel ürün yazılımını güncelleyin ve anahtar kanalını CT olarak ayarlayın. http://www.playuav.com/download/playuavosd/prerelease/PlayuavOSD_ch16.hex
FYI, Yapılandırma Aracı ile ilgili bir kontrol yok, 1'den 16'ya kadar herhangi bir değer girebileceğiniz anlamına gelir. Bu bir hata ve doğrulama kodları eklemeniz gerekir :-)
Hello there I cannot access this file. I ask you to reload
Hello,
I'm using arducopter AC3.3 with pixhawk and 16ch sbus receiver, and Copter 3.3 firmware enable 16 channels. Could you please update firmware to enable 9-16ch ?
Kind regards.