search

PlayUAV / PlayuavOSD

A Graphical OSD for FPV
http://en.playuav.com
GNU General Public License v3.0
67 stars 60 forks source link

Configure autopilot through osd #35

Open brat002 opened 7 years ago

brat002 commented 7 years ago

Does this osd allow to configure flight controller via rc sticks? It is what many people need for ardupilot.

trgFPV commented 7 years ago

No currently it is not possible to configure ardupilot via the sticks with this osd. I heard minimosd-ng can do it.

mkschreder commented 7 years ago

I can implement it. But sounds like it is going to need support from the autopilot.

trgFPV commented 7 years ago

The biggest (and only) issue we see is that you can not stop the autopilot from moving the control surfaces while navigating the menu. One solution could be using the RC*_DZ command to set the deadzone very high while the osd is in configuration mode.

brat002 commented 7 years ago

Look on PItlab OSD, where navigation through settings implemented via 3 pos rc switch

2016-10-04 20:53 GMT+03:00 trgFPV notifications@github.com:

The biggest (and only) issue we see is that you can not stop the autopilot from moving the control surfaces while navigating the menu. One solution could be using the RC*_DZ command to set the deadzone very high while the osd is in configuration mode.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/PlayUAV/PlayuavOSD/issues/35#issuecomment-251462728, or mute the thread https://github.com/notifications/unsubscribe-auth/ADyecKMEnaGMKoCJCfSUlR4Jzknb-Ub5ks5qwpK2gaJpZM4KEqlx .

mkschreder commented 7 years ago

OSD should not be on when in the settings mode. However the whole osd software needs a rewrite because current design does not easily allow such flexibility.

On Tue, Oct 4, 2016 at 8:52 PM, brat002 notifications@github.com wrote:

Look on PItlab OSD, where navigation through settings implemented via 3 pos rc switch

2016-10-04 20:53 GMT+03:00 trgFPV notifications@github.com:

The biggest (and only) issue we see is that you can not stop the autopilot from moving the control surfaces while navigating the menu. One solution could be using the RC*_DZ command to set the deadzone very high while the osd is in configuration mode.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <https://github.com/PlayUAV/PlayuavOSD/issues/35#issuecomment-251462728 , or mute the thread https://github.com/notifications/unsubscribe-auth/ ADyecKMEnaGMKoCJCfSUlR4Jzknb-Ub5ks5qwpK2gaJpZM4KEqlx

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/PlayUAV/PlayuavOSD/issues/35#issuecomment-251478829, or mute the thread https://github.com/notifications/unsubscribe-auth/AERqiRfX_imlJrAOauqHhz813dRyIqXSks5qwqBtgaJpZM4KEqlx .