Closed GHrynk closed 3 years ago
I confirm it. The RV-1X-A part is restock-rcs-block-multi-mini-2
. It has thrusterPower = 1
in its config. It's in ReStock+.
The scaled RV-1X part is RCSblock_01_small
, it is patched by ReStock.
On a related note, why are all 0.25 kN RCS thrusters now hidden? They were a very good middle ground between the weak 0.1 kN thrusters and the excessively strong 1 kN ones.
Not sure how to explain it, as "restock-rcs-block-quad-mini-1.cfg" and "restock-rcs-block-quad-angled-mini-1.cfg" both have the same thrusterPower = 0.25
That would probably be because those aren't the right files to look at :).
On a related note, why are all 0.25 kN RCS thrusters now hidden? They were a very good middle ground between the weak 0.1 kN thrusters and the excessively strong 1 kN ones.
Model was used for the new Squad ones, don't want to make and configure a bunch of new models.
The RV-1X-A (quad angled mini) has the same thruster power as the much larger RV-105-A and RV-105. The RV-1X (regular quad mini) seems to be scaled appropriate at 1/10th thrust power. In the VAB part properties, the RV-1X has a Thruster Power of 0.1, but the RV-1X-A (same mass as RV-1X) has a Thruster Power of 1.0. Not sure how to explain it, as "restock-rcs-block-quad-mini-1.cfg" and "restock-rcs-block-quad-angled-mini-1.cfg" both have the same thrusterPower = 0.25.
I'm not sure how the calculations in the properties are getting calculated, but I confirmed it in flight and with RCS Build Aid, that the RV-1X-A has the same thrust as the RV-105-A and RV-105, and the RV-1X has one tenth the thrust of either.
The Place Anywhere 1 (the part that's unselectable after drop or placement, see Issue #939) seems to match the thrust displayed in its properties (0.2), as confirmed by RCS Build Aid. The Place Anywhere 7 seems to match its listed thrust as well.
This was done with Restock/Restock+ v1.3.0 in KSP 1.11.0 Win x64 with Expansions.
MORE: Tried out the quads in 3-way configuration. Same result.