added A-OK remote control protocol

Portisch / RF-Bridge-EFM8BB1

Alternative Firmware for the Sonoff RF Bridge EFM8BB1 chip

293 stars 124 forks source link

added A-OK remote control protocol #221

Open nordeep opened 2 years ago

nordeep commented 2 years ago

All credit to @akirjavainen, @vonnieda and everyone who has contributed to https://github.com/akirjavainen/A-OK Successfully tested in the next environment:

Sonoff RF Bridge R2 V1.0
Tasmota - 12.0.2
Remote - AC123-06D
Tubular Motor - AM15-03/35-ES-E (Mine is Zemismart brand)

Works fast both for receiving and transmitting. Misses not noticed.

PS: Seems project doesn't update a long time. It's hard to hope that this pull request will be included. Anyway, if anyone wants to try - you can get working firmware build from my fork - RF-Bridge-EFM8BB1.hex

vonnieda commented 2 years ago

Nice work @nordeep! I'm going to try this out. I've been wanting to add a few new commands to my setup, but since I had to manually convert them I was lazy. This will make it much easier!

AGILLY-CSI commented 4 months ago

hi @nordeep, I am asking for your help in modifying the AOK protocol that you wrote. I have an AC123-06 remote control and a Sonoff RF Bridge powered by Tasmota. I also installed the Portisch firmware. I tried to install your firmware, but I don't see anything else in the console. Here is what I scan with the RfRaw AAB155 command: "RfRaw":{"Data":"AA B1 04 139C 0280 0118 13BA 38192A192A1A1A19292A192A1A1A1929292A192A19292A1929292A1A1A1A192A1A1A1A1A192A1A1A1A1A 1A1A1A1A1A1A1A1A1A1A1A192A19292A192A1A1A1A1A1929 55"} Can you help me ?