batch denoise with RX; keep original though! need to move to folders by mic image first, and create "silent" files.
Python for creating mixes, followed by rebalancing, possibly onset detection and trimming, and adding fades.
-- also, some cleaning up? For instance, discovered that there is some noise at the end of A0v1, would be easiest NOW to just trim the last two seconds off...
16 velocity layers (fewer for una corda)
-- use dB meter
-- so, 30 x 16 = 480 samples per set
LONG ringdown (we want good long tails)
Quiet silent key release at end of bringdown
Sets
[x] Normal
-- without sustain pedal
-- do Normal, leave una corda til end, and omit if we don't have time
[x] Hammers
-- 2-3 release speeds, every key
Short strikes for resonance (2-3 velocity layers, will have to edit out strike for later, to isolate resonance)
[x] with pedal + immediate hand muting of struck string (for sustain pedal resonance)
[x] without pedal and no hand muting (for release resonance); note that there are no dampers above G#6, so we'll need to think about that during implementation.
Editing / Mixing
Sharing
Taplin
Specs/Process
Sets
[x] Normal -- without sustain pedal -- do Normal, leave una corda til end, and omit if we don't have time
[x] Hammers -- 2-3 release speeds, every key
Short strikes for resonance (2-3 velocity layers, will have to edit out strike for later, to isolate resonance)
[x] without pedal and no hand muting (for release resonance); note that there are no dampers above G#6, so we'll need to think about that during implementation.
Examples for modeling