Closed richardnies closed 2 years ago
Just contribute some information. I have an old executable, version 3.10
, and it runs normally. If there is something wrong, it probably happens after that.
xspech : : version = 3.10
: compiled : date = Fri Jul 2 11:23:49 EDT 2021 ;
: : srcdir = /home/caoxiang/code/spec ;
: : macros = src/macros ;
: : fc = mpiifort ;
: : flags = -r8 -DIFORT -mcmodel=large -O3 -m64 -unroll0 -f
no-alias -ip -traceback -fPIC -DOPENMP -fopenmp ;
xspech : :
xspech : 0.00 : date=2021/10/25 , 05:02:26 ; machine precision= 1.11E-16 ; vsmall= 1.11E-14 ; small= 1.11E-12 ;
xspech : :
xspech : 0.00 : parallelism : ncpu= 32 ; nthreads= 8 ;
rdcmdl : :
rdcmdl : 0.00 : ext = G3V02L1Fi.001
xspech : :
xspech : 0.00 : begin execution ; calling global:readin ;
readin : :
readin : 0.00 : Igeometry= 3 ; Istellsym= 1 ; Lreflect= 0 ;
readin : : Lfreebound= 0 ; phiedge= 2.000000000000000E+00 ; curtor= 1.038123580200000E-09 ; curpol= 0.000000000000000E+00 ;
readin : : gamma= 0.000000000000000E+00 ;
readin : : Nfp= 5 ; Nvol= 2 ; Mvol= 2 ; Mpol= 4 ; Ntor= 4 ;
readin : : pscale= 1.00000E-03 ; Ladiabatic= 0 ; Lconstraint= 1 ; mupf: tol,its= 1.00E-12 , 128 ;
readin : : Lrad = 8, 4,
readin : :
readin : 0.00 : Linitialize= 0 ;LautoinitBn= 1 ; Lzerovac= 0 ; Ndiscrete= 2 ;
readin : : Nquad= -1 ; iMpol= -4 ; iNtor= -4 ;
readin : : Lsparse= 0 ; Lsvdiota= 0 ; imethod= 3 ; iorder= 2 ; iprecon= 1 ; iotatol= -1.00000E+00 ;
readin : : Lextrap= 0 ; Mregular= -1 ; Lrzaxis= 1 ; Ntoraxis= 3 ;
readin : :
readin : 0.00 : LBeltrami= 4 ; Linitgues= 1 ; Lmatsolver= 3 ; LGMRESprec= 1 ; NiterGMRES= 200 ; epsGMRES= 1.00000E-14 ; epsILU= 1.00000E-12 ;
readin : :
readin : 0.00 : Lfindzero= 2 ;
readin : : escale= 0.00000E+00 ; opsilon= 1.00000E+00 ; pcondense= 4.000 ; epsilon= 1.00000E+00 ; wpoloidal= 1.0000 ; upsilon= 1.00000E+00 ;
readin : : forcetol= 1.00000E-12 ; c05xmax= 1.00000E-06 ; c05xtol= 1.00000E-12 ; c05factor= 1.00000E-04 ; LreadGF= F ;
readin : : mfreeits= 0 ; gBntol= 1.00000E-06 ; gBnbld= 6.66000E-01 ;
readin : : vcasingeps= 1.00000E-12 ; vcasingtol= 1.00000E-08 ; vcasingits= 8 ; vcasingper= 1 ;
readin : :
readin : 0.00 : odetol= 1.00E-07 ; nPpts= 0 ;
readin : : LHevalues= F ; LHevectors= F ; LHmatrix= F ; Lperturbed= 0 ; dpp= -1 ; dqq= -1 ; dRZ= 1.00000000E-05 ; Lcheck= 0 ; Ltiming= F ;
readin : :
readin : : myid= 0 ; Rscale= 1.000000000000000E+01 ;
preset : : myid= 0 ; Mrad= 8 : Lrad= 8, 4,
preset : 0.06 : LBsequad= F , LBnewton= F , LBlinear= T ;
preset : :
preset : 0.06 : Nquad= -1 ; mn= 41 ; NGdof= 81 ; NAdof= 361, 370,
preset : :
preset : 0.06 : Nt= 32 ; Nz= 32 ; Ntz= 1024 ;
newton : 16.29 : 0 0 ; |f|= 1.48437E-02 ; time= 15.78s ; log|BB|e= -4.66
newton : : ; ; log|II|o= -2.42
Fixed by 29a6db4 ; the CMake build setup needs to also expand the NSCREENLIST
macro.
See also: https://github.com/PrincetonUniversity/SPEC/pull/153#issuecomment-950755308
pywrap_makefile
is merged into master
now. Please re-open if this issue is still present.
In the master branch, some of the tests in
InputFiles/TestCases
seem to be failing (e.g.G3V02L1Fi.001.sp
) withvolume : fatal : myid= 0 ; vflag.eq.0 .and. vvolume(lvol).lt.small ; volume cannot be zero or negative ;
.This problem was also encountered by @jloizu ?
For some reason, the tests run fine in
ci
?