Printrbot Marlin issues

Printrbot / Marlin

Fork of Marlin for the Printrbot

87 stars 59 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

G29 Non Op on PrintrBot Simple Maker 1402

#24 dataman closed 6 years ago
9
Rename fpos_t to fpos1 in SdBaseFile.h and SdBaseFile.cpp

#23 Phraust opened 6 years ago
0
Can someone suggest the best branch for a RevB Printrbot Plus board

#22 pcarew closed 7 years ago
2
OPTION 81 FOR PRINTRBOARD REV A-E!!?!?!!

#21 secretgspot opened 7 years ago
0
confused by autoleveling config

#20 argus0209 closed 7 years ago
10
OPTION 81 FOR PRINTRBOARD REV A-E!!?!?!!

#19 secretgspot closed 8 years ago
1
Connecting to A2 A3 Analog Inputs

#18 mrkaroshi opened 8 years ago
1
to turn off ENABLE_AUTO_BED_LEVELING, mods are needed in Configuration_Store.cpp

#17 RetireeJay46 opened 8 years ago
0
Changed Z_HOME_RETRACT_MM to 3 mm

#16 readmodifywrite closed 7 years ago
0
Z azis not working correctly

#15 JefroB closed 9 years ago
3
Fixed Extrudrboard pin mapping (changed w/ Rev F)

#14 j-laird closed 9 years ago
0
Changes to probing to support Metal Plus (probe offset ~20mm, probes off bed in prior versions)

#13 j-laird closed 9 years ago
0
Changes for Rev F v3 Req by HQ

#12 j-laird closed 9 years ago
0
Update bed thermistor, move to single firmware for rev F

#11 j-laird closed 9 years ago
2
Update Marlin_main.cpp

#10 PxT closed 9 years ago
0
Home Offset (M206) not working

#9 Daedalus7000 opened 9 years ago
0
Is this the firmware for the new Metal Plus?

#8 nylen closed 9 years ago
3
Update Configuration.h

#7 sfelling opened 9 years ago
0
Print not centered if using G29 to auto-level

#6 PxT opened 10 years ago
8
4 point auto level probing

#5 bmcminn closed 8 years ago
3
Add table 70 for pico hot end 500C thermistor

#4 ssa3512 closed 10 years ago
0
Please add thermistor tables for Pico Hot end with 500C

#3 ssa3512 closed 10 years ago
3
Question about adding PB USB IDs

#2 nathan-liyiming closed 8 years ago
2
bedlevel-v2 compiling

#1 epicac closed 7 years ago
5