[BUG] Shaping issues

[Nerbulus]

Description Nose shaping is too stubby and APU area is too blocky

Steps to reproduce Steps to reproduce the behavior:

1. Load up
2. Observe nose and APU exhaust area

Expected behavior Should be shaped a little differently, APU should be smaller and rounder while nose should be rounder and less stubby

Screenshots Ingame: IRL:

Ingame: IRL:

Additional context Add any other context about the problem here.

[Clink1234]

Note: Bottom needs reshaping, as well as vertical stab to center of fuselage.

[Clink1234]

accidentally closed sorry, reopen

[Winter-huntsman]

Here are picture that Nerb asked for on discord showing where the unevenness was. I added a straight line to show what areas are off. Also here is a actual side view of the A330-300 to give an idea and how the landing gear is on the flat side instead of a slope.

[Winter-huntsman]

On more inspection, the wing pods under the wings do not seem to be connected as shown in the pictures attached.

[Winter-huntsman]

Last thing I have noticed for now. Right side landing gear is missing some actual modeling compared to the left landing gear. First picture will be of the left gear which is intact, the second picture will be the right that's missing stuff.