search

ProjectsWithRed / auto-wire-stripper-cutter

An automatic wire stripper and cutter, you simply choose some measurements on a screen and it will do it all for you.
Other
49 stars 22 forks source link

No display #11

Closed AV1987 closed 2 years ago

AV1987 commented 2 years ago

Hi @ProjectsWithRed. Thanks for sharing this project, very interesting. It seems I uploaded the code sucessful but I have no display. I only connect ESP32 Devkit with Oled 128x64. The example code works ok with display. What do I miss? Thank you

Tips: adding a 10uF Cap on RST pin to ground to avoid holding the Reset button during sketching.

ProjectsWithRed commented 2 years ago

@AV1987 I have updated the code since there was an update to the Encoder library which made it not work. Upload again and let me know if you still have issues.

AV1987 commented 2 years ago

@AV1987 I have updated the code since there was an update to the Encoder library which made it not work. Upload again and let me know if you still have issues.

Thanks Red! My setup is running now. Will give you update.

ProjectsWithRed commented 2 years ago

Moved to issue #12.