Open demostanis opened 3 years ago
Hey @demostanis
That issue seems to be related with the keyring. What keyring backend are you using ? Usually either kwallet(kwalletd5) or gnome-keyring is required.
Using gnome-keyring version 40.
Hey @demostanis
Disabling IPv6 is not necessary and is usually discouraged, as our library is able to prevent IPv6 leaks.
Could you try the following:
My suspicion is that will not work, but I would need to be sure. Also, after trying the previous steps, I want you to repeat the same steps from 1-6, but this time select for the password to be "Store for all users" and see if you're able to connect.
Please reply back with the results.
Using nm-applet and after adding a VPN connection, the application successfully connects. However, I haven't been prompted to "store password only for this user".
@demostanis you're not prompted, you need to select it yourself.
I am neither prompted not asked to select it, all I see is
You need to press here
I've set "store password for all users" and it's still able to connect.
Hey @demostanis please follow the provided from my previous comment here
What did I miss? I did everything and was able to connect via the app
https://github.com/ProtonVPN/linux-cli/issues/1#issuecomment-855997845
I did all of this and the VPN is supposedly connected. But my IP didn't change and WireShark does not display UDP VPN traffic.
$ nmcli connection show --active
NAME UUID TYPE DEVICE
nl-free-01.protonvpn.com.udp 8c3b351e-178b-4396-813f-4fa86c4401c6 vpn ipv6leakintrf0
pvpn-ipv6leak-protection c40e14b1-49f3-4f06-a631-20eca1a833fb dummy ipv6leakintrf0
enp0s3 26fb7060-405a-4a36-a0c5-c2b43a0c9558 ethernet enp0s3
tun0 8c1b06ff-da1a-4a14-8743-fa0147a6223e tun tun0
How can I route my traffic through that connection?
@RudiAusBuddeln it seems that you using native .ovpn file. Please remove the ipv6 leak protection interface with the following command: nmcli c del pvpn-ipv6leak-protection
Then just restart the vpn connection
Hmmm, it still didn't change my IP or anything.
I will just use the openvpn
command directly. With my own recursive DNS. Thanks for your help though!
I am having the same issue. Installed the AUR package version. Using a proper keyring.
@hexpwn I just solved it by installing network-manager-applet
from the arch repos and starting it. I have no idea why it works, but when nm-applet is running, everything works flawlessly.
@3nt3 what DE are you running?
@calexandru2018 none, I run bspwm
I had the same issue on Debian, also without any DE. Installing and running nm-applet
solved the issue for me too. But ideally I wish I didn't need to run it.
Tried connecting to Netherlands, the client hangs forever. Same with the GUI. Related journal logs:
Free tier. IPv6 disabled in kernel. I also tried disabling UFW, with no success. Running latest version from AUR.