Not all panels found

[freijn]

Many thanks for your work ! Really happy with it but....

The number panels found is stuck at 19 where I have 22. Its running for 3 days now.

Any clue / hint?

THanks in advance.

 Frank

[ProudElm]

What version is installed? It looks to default to version 1.1.3 while 1.1.4 is the most recent one?

[spady7]

Hi, I' ve same issue. loaded 23 panels, but i've 28. Installed v. 1.1.3 (compared to v. 1.1.4 there is not differences) Any idea?

[freijn]

After a few days, finnally all mu 22 panels are discovered. I Will see if i can find anything in the logfiles. Perhaps a small note in the install guide might be helpfull.

Op di 20 dec. 2022 12:28 schreef spady7 @.***>:

Hi, I' ve same issue. loaded 23 panels, but i've 28. Installed v. 1.1.3 (compared to v. 1.1.4 there is not differences) Any idea?

— Reply to this email directly, view it on GitHub https://github.com/ProudElm/solaredgeoptimizers/issues/18#issuecomment-1359215360, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK3XIYB7GHKIIW4JEHHZEE3WOGJ5TANCNFSM6AAAAAATBQ5ANE . You are receiving this because you authored the thread.Message ID: @.***>

[ProudElm]

mm...strange that after a time it does work.. dit you reboot perhaps?

@spady7 What could help is rebooting but if you can, could you send me the json response from: https://monitoring.solaredge.com/solaredge-apigw/api/sites/<>/layout/logical (change the part with your site_id).

You can email it to me. Than i can debug the response and check if there are some issues that could be causing not adding all the panels.

[freijn]

Not reboot, but reload, after the update and yaml change. But the first 4 appeared a few min after implementatie. Then nothing and then after a few days all have been found. I am remote but Will search the logfile for details.

Op di 20 dec. 2022 12:51 schreef ProudElm @.***>:

mm...strange that after a time it does work.. dit you reboot perhaps?

@spady7 https://github.com/spady7 What could help is rebooting but if you can, could you send me the json response from: https://monitoring.solaredge.com/solaredge-apigw/api/sites/<>/layout/logical (change the part with your site_id).

You can email it to me. Than i can debug the response and check if there are some issues that could be causing not adding all the panels.

— Reply to this email directly, view it on GitHub https://github.com/ProudElm/solaredgeoptimizers/issues/18#issuecomment-1359247776, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK3XIYECIP22P5NUJTCPXTTWOGMUDANCNFSM6AAAAAATBQ5ANE . You are receiving this because you authored the thread.Message ID: @.***>

[spady7]

mm...strange that after a time it does work.. dit you reboot perhaps?

@spady7 What could help is rebooting but if you can, could you send me the json response from: https://monitoring.solaredge.com/solaredge-apigw/api/sites/<>/layout/logical (change the part with your site_id).

You can email it to me. Than i can debug the response and check if there are some issues that could be causing not adding all the panels.

@ProudElm now seams to be ok. It takes around 30 min to get all data panels e panels too. Now seams to be ok.

[freijn]

You can email it to me. Than i can debug the response and check if there are some issues that could be causing not adding all the panels.

Can you let me know how I can find your email address? pls

[ProudElm]

You can mail me at proudelm@yahoo.com

[ProudElm]

@freijn Is this issue still active? If not, i will close it!

[freijn]

After some days it did find all my panels. You can close this issue. Many thanks for your patience.

[ProudElm]

Good to read! Your welcome!