cloning keyfob 13.56 MHz

[JOJOLEE1981]

I got an error message as following when I tried to clone the keyfob 13.56 MHz

[usb] pm3 --> hf iclass dump --ki 0 [+] Using AA1 (debit) key[0] AE A6 84 A6 DA B2 32 78 [=] Card has at least 2 application areas. AA1 limit 18 (0x12) AA2 limit 31 (0x1F) . [!!] failed to communicate with card [usb] pm3 -->

Please see the ver of the PM3

[usb] pm3 --> hw ver

[ Proxmark3 RFID instrument ]

[ CLIENT ] client: RRG/Iceman/master/v4.13441-725-g49ccd6ae1 2021-08-17 10:46:50 compiled with MinGW-w64 10.3.0 OS:Windows (64b) ARCH:x86_64

[ PROXMARK3 ] firmware.................. PM3 GENERIC

[ ARM ] bootrom: RRG/Iceman/master/v4.13441-725-g49ccd6ae1 2021-08-17 10:46:37 os: RRG/Iceman/master/v4.13441-725-g49ccd6ae1 2021-08-17 10:46:45 compiled with GCC 10.1.0

[ FPGA ] LF image built for 2s30vq100 on 2020-07-08 at 23:08:07 HF image built for 2s30vq100 on 2020-07-08 at 23:08:19 HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23:08:30

[ Hardware ] --= uC: AT91SAM7S512 Rev B --= Embedded Processor: ARM7TDMI --= Internal SRAM size: 64K bytes --= Architecture identifier: AT91SAM7Sxx Series --= Embedded flash memory 512K bytes ( 53% used )

[usb] pm3 -->

Any help with the iclass cloning instruction will be great. Thanks

[iceman1001]

Wrong repo.

[pwpiwi]

You are obviously using the RRG software. Please post your issues in the respective github repository https://github.com/RfidResearchGroup/proxmark3

[JOJOLEE1981]

You are obviously using the RRG software. Please post your issues in the respective github repository https://github.com/RfidResearchGroup/proxmark3

Hi pwpiwi

please advise where I should post. Thanks

[merlokk]

http://www.proxmark.org/ -- forum or discord https://github.com/RfidResearchGroup/proxmark3/blob/master/README.md