Prusa Slicer Returns Warning on case_incubator.FCStd,

[ForrestErickson]

Lee loaded the FreeCad file: https://github.com/PubInv/moonrat/blob/main/moonratII/enclosure_mooonratII/heater_assembly/case_incubater.FCStd

Lee exported an STL file. In preparation to print, Lee loaded the STL file into PrusaSlicer. The slicer returned warnings.

The design will require "supports" because there is a large horizontal surface not on the build plate.

Lee will enable supports and try to print.

[ForrestErickson]

Notes on trying to set up PrusaSlicer for support.

Version:

and

Here is the slicer project file: case_incubater-Cuerpo20240514_VerticalTrees.zip