Anonymous941
commented
11 months ago When I re-ran the command, I got the following output:
No device type given. Using 'recording device'
CEC Parser created - libCEC version 6.0.2
no serial port given. trying autodetect:
path: Raspberry Pi
com port: RPI
opening a connection to the CEC adapter...
DEBUG: [ 85] Broadcast (F): osd name set to 'Broadcast'
DEBUG: [ 86] logical address changed to Free use (e)
DEBUG: [ 86] Open - vc_cec initialised
NOTICE: [ 86] connection opened
DEBUG: [ 87] << Broadcast (F) -> TV (0): POLL
DEBUG: [ 87] initiator 'Broadcast' is not supported by the CEC adapter. using 'Free use' instead
TRAFFIC: [ 87] << e0
DEBUG: [ 87] processor thread started
DEBUG: [ 178] initiator 'Broadcast' is not supported by the CEC adapter. using 'Free use' instead
TRAFFIC: [ 178] << e0
DEBUG: [ 268] >> POLL not sent
DEBUG: [ 268] TV (0): device status changed into 'not present'
DEBUG: [ 268] registering new CEC client - v6.0.2
DEBUG: [ 269] SetClientVersion - using client version '6.0.2'
NOTICE: [ 269] setting HDMI port to 1 on device TV (0)
DEBUG: [ 269] << Broadcast (F) -> TV (0): POLL
DEBUG: [ 269] initiator 'Broadcast' is not supported by the CEC adapter. using 'Free use' instead
TRAFFIC: [ 269] << e0
DEBUG: [ 360] initiator 'Broadcast' is not supported by the CEC adapter. using 'Free use' instead
TRAFFIC: [ 360] << e0
DEBUG: [ 450] >> POLL not sent
DEBUG: [ 450] SetConfiguration: double tap timeout = 200ms, repeat rate = 0ms, release delay = 500ms
DEBUG: [ 450] detecting logical address for type 'recording device'
DEBUG: [ 450] trying logical address 'Recorder 1'
DEBUG: [ 450] << Recorder 1 (1) -> Recorder 1 (1): POLL
TRAFFIC: [ 450] << 11
TRAFFIC: [ 721] << 11
DEBUG: [ 993] >> POLL not sent
DEBUG: [ 993] using logical address 'Recorder 1'
DEBUG: [ 993] Recorder 1 (1): device status changed into 'handled by libCEC'
DEBUG: [ 993] Recorder 1 (1): power status changed from 'unknown' to 'on'
DEBUG: [ 993] Recorder 1 (1): vendor = Pulse Eight (001582)
DEBUG: [ 993] Recorder 1 (1): CEC version 1.4
DEBUG: [ 993] AllocateLogicalAddresses - device '0', type 'recording device', LA '1'
WARNING: [ 993] RegisterLogicalAddress - vc_cec_set_logical_address(1) returned device is busy (3)
DEBUG: [ 993] UnregisterLogicalAddress - releasing previous logical address
WARNING: [ 1083] unhandled response received: opcode=0 initiator=1 destination=0 response=1
DEBUG: [ 1083] logical address changed to Broadcast (f)
DEBUG: [ 1083] Recorder 1 (1): osd name set to 'CECTester'
DEBUG: [ 1083] Recorder 1 (1): menu language set to 'eng'
DEBUG: [ 1084] GetPhysicalAddress - physical address = 0000
NOTICE: [ 1084] setting HDMI port to 1 on device TV (0)
DEBUG: [ 1084] << Recorder 1 (1) -> TV (0): POLL
TRAFFIC: [ 1084] << 10
DEBUG: [ 1085] sending command 'feature abort' failed (4)
TRAFFIC: [ 1085] << 10
DEBUG: [ 1085] sending command 'feature abort' failed (4)
DEBUG: [ 1085] >> POLL not sent
DEBUG: [ 1085] Recorder 1 (1): physical address changed from ffff to 1000
DEBUG: [ 1085] << Recorder 1 (1) -> broadcast (F): physical address 1000
TRAFFIC: [ 1086] << 1f:84:10:00:01
DEBUG: [ 1089] sending command 'report physical address' failed (4)
TRAFFIC: [ 1089] << 1f:84:10:00:01
DEBUG: [ 1089] sending command 'report physical address' failed (4)
DEBUG: [ 1089] using device/input physical address 0000
NOTICE: [ 1089] CEC client registered: libCEC version = 6.0.2, client version = 6.0.2, firmware version = 1, logical address(es) = Recorder 1 (1) , base device: TV (0), HDMI port number: 1, physical address: 1.0.0.0, compiled on Linux-5.4.0-72-generic ... , features: P8_USB, DRM, P8_detect, randr, RPi, Exynos, Linux, AOCEC
DEBUG: [ 1089] << Recorder 1 (1) -> TV (0): OSD name 'CECTester'
DEBUG: [ 1089] << Recorder 1 (1) -> TV (0): POLL
TRAFFIC: [ 1089] << 10
DEBUG: [ 1090] sending command 'feature abort' failed (4)
TRAFFIC: [ 1090] << 10
DEBUG: [ 1091] sending command 'feature abort' failed (4)
DEBUG: [ 1091] >> POLL not sent
DEBUG: [ 1091] not sending command 'set osd name': destination device 'TV' marked as not present
DEBUG: [ 1091] << requesting power status of 'TV' (0)
DEBUG: [ 1091] << Recorder 1 (1) -> TV (0): POLL
TRAFFIC: [ 1091] << 10
DEBUG: [ 1092] sending command 'feature abort' failed (4)
TRAFFIC: [ 1092] << 10
waiting for input
DEBUG: [ 1092] sending command 'feature abort' failed (4)
DEBUG: [ 1092] >> POLL not sent
DEBUG: [ 1092] not sending command 'give device power status': destination device 'TV' marked as not present
I just got a fresh HDMI cable, and whenever I press a button, this line appears in
cec-client:This line is repeated twice every second (pauses for a second, then prints 2 messages).