Export Selection Haltung - only Manhole exported

sjib commented 3 years ago

I tried to make a selection of one reach that has several damages attached. The export only provides:

all the organisations (OK)
one manhole 8486 (should be two (begin and end)
one wastewater_node (from manhole 8486) - should be also two
the related structure_parts (correct from the manholes exported)
all data_media objects (could not test yet if the selection there is done)
missing: selected reach, channel and
missing therefore I guess: all damage_channel

How to reproduce: Select layer vw_gep_reach, select one reach with i-button that has damages attached. Then click on INTERLIS Export button.

20210825_interlisexport_arbon_selection_haltung_only_structure

INTERLIS Export GUI shows only 1 structure selected but no reach.

Expected behaviour: INTERLIS Export GUI shows 2 structures selected and one reach.

Results export xtf: qgep-export_selection_haltung.xtf.txt

sjib commented 3 years ago

Check this code https://github.com/QGEP/qgepqwat2ili/blob/master/qgepqwat2ili/gui/gui_export.py

olivierdalang commented 3 years ago

The "I" button is not selection, but identification (which is indeed confusing...). You can see that selection is yellow, while identification is red.

Can you try again with selection ? (closing this in the mean time, please reopen if you still not get expected results with selection)

sjib commented 3 years ago

When I select with the selection menu it works: gep_export_selection_how_to_select

gep_export_selection

Results selecting on layer qgep_reach: 20210901_qgep-export_selection.zip

QGEP / qgepqwat2ili

Export Selection Haltung - only Manhole exported #38