Closed pmbroth closed 5 months ago
Restart slicer?
From: pmbroth @.> Sent: Wednesday, January 10, 2024 8:33 AM To: QIDITECH/QIDISlicer @.> Cc: Subscribed @.***> Subject: [QIDITECH/QIDISlicer] Drag stl to platter from desktop, exploerer, etc doe nto work (Issue #23)
When dragging stl file to platter, it does not allow it. Importing works though. circle with slash is displayed. Worked on previous version.
— Reply to this email directly, view it on GitHubhttps://github.com/QIDITECH/QIDISlicer/issues/23, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADGNLN7NXXB57NJHIHG4KJDYN27GPAVCNFSM6AAAAABBVCUU6WVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA3TINZUGMZDQNI. You are receiving this because you are subscribed to this thread.Message ID: @.***>
LOL.. That worked….
From: trancified @.> Sent: Wednesday, January 10, 2024 11:36 AM To: QIDITECH/QIDISlicer @.> Cc: pmbroth @.>; Author @.> Subject: Re: [QIDITECH/QIDISlicer] Drag stl to platter from desktop, explorer, etc does not work (Issue #23)
Restart slicer?
From: pmbroth @. <mailto:@.> > Sent: Wednesday, January 10, 2024 8:33 AM To: QIDITECH/QIDISlicer @. <mailto:@.> > Cc: Subscribed @. <mailto:@.> > Subject: [QIDITECH/QIDISlicer] Drag stl to platter from desktop, exploerer, etc doe nto work (Issue #23)
When dragging stl file to platter, it does not allow it. Importing works though. circle with slash is displayed. Worked on previous version.
— Reply to this email directly, view it on GitHubhttps://github.com/QIDITECH/QIDISlicer/issues/23, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADGNLN7NXXB57NJHIHG4KJDYN27GPAVCNFSM6AAAAABBVCUU6WVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA3TINZUGMZDQNI. You are receiving this because you are subscribed to this thread.Message ID: @. <mailto:@.> >
— Reply to this email directly, view it on GitHub https://github.com/QIDITECH/QIDISlicer/issues/23#issuecomment-1885199803 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AF25YXNGHN3BZCVJRNQRRETYN27PBAVCNFSM6AAAAABBVCUU6WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOBVGE4TSOBQGM . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AF25YXMJ2JH5UBZYXU5MJKTYN27PBA5CNFSM6AAAAABBVCUU6WWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTQLXO3W.gif Message ID: @. @.> >
if this issue occurs, I close and reopent the application. This ocuured sveral times.
Starting the software from the installation package will cause this problem to be sent, which should not be sent randomly during normal use. You can try running the software as an administrator.
When dragging stl file to platter, it does not allow it. Importing works though. circle with slash is displayed. Worked on previous version.