search

QIDITECH / QIDISlicer

QIDISlicer gets your 3D printing easier and faster.
https://qidi3d.com/
GNU Affero General Public License v3.0
40 stars 10 forks source link

QIDI ASA profile chamber heat problem! #38

Closed JohnPetrucci closed 4 months ago

JohnPetrucci commented 4 months ago

With the default Qidi ASA profile and the chamber heating set to 55 degrees, once the print is started, the chamber heating does not activate automatically."

derbasteller commented 4 months ago

Hallo,

die erste Schicht wird immer ohne Kammerheizung gedruckt!

Ab der 2. Schicht muss die Kammerheizung hochfahren.

thank you and stay healthy!,

danke und bleiben sie gesund!

Michael Kisser

Tel.: 0 51 45 / 93 94 0 - 91

Mobil: 0 1575 11 15 545

Mail: @. @.>

Auf dem Stüh 21

29353 Ahnsbeck

Diese E-Mail enthält vertrauliche und/ oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser e-Mail ist nicht gestattet.

This e-mail may contain confidential and/ or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

Von: JohnPetrucci @. Gesendet: Samstag, 17. Februar 2024 19:16 An: QIDITECH/QIDISlicer @.> Cc: Subscribed @.***> Betreff: [QIDITECH/QIDISlicer] QIDI ASA profile chamber heat problem! (Issue #38)

With the default Qidi ASA profile and the chamber heating set to 55 degrees, once the print is started, the chamber heating does not activate automatically."

— Reply to this email directly, view it on GitHub https://github.com/QIDITECH/QIDISlicer/issues/38 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AJEWUCESGCQNYOQMPOLPH33YUDXU7AVCNFSM6AAAAABDNPR6LCVHI2DSMVQWIX3LMV43ASLTON2WKOZSGE2DANBQGYYTONY . You are receiving this because you are subscribed to this thread. https://github.com/notifications/beacon/AJEWUCEVP2IO2CG3WUGKKATYUDXU7A5CNFSM6AAAAABDNPR6LCWGG33NNVSW45C7OR4XAZNFJFZXG5LFVJRW63LNMVXHIX3JMTHH7FABUE.gif Message ID: @. @.> >

QIDITECH commented 4 months ago

The chamber will activate when the second layer is printed.