search

QIDITECH / QIDISlicer

QIDISlicer gets your 3D printing easier and faster.
https://qidi3d.com/
GNU Affero General Public License v3.0
40 stars 10 forks source link

Chamber temp shutting down for the first minutes of the print #48

Closed BlackThumb closed 3 months ago

BlackThumb commented 3 months ago

Printing ABS, if I set chamber temp 55° C, chamber fan speed for exemple 40/60%, warm up the chamber to 55° then start the print, when it starts the chamber heater shuts down and I have to set it manually. After i think the first layer it will start again automatically, but it has lost 15° of chamber temp (the outside temperature is around 10/14°)

QIDITECH commented 3 months ago

Due to the slow printing speed of the first layer, in the summer, preheating the chamber in advance can easily lead to blockage of the nozzle. To solve this problem, you can change M141 S0 in the starting gcode to M141 S[volume_temperature].