QubesOS / qubes-issues

The Qubes OS Project issue tracker
https://www.qubes-os.org/doc/issue-tracking/
526 stars 46 forks source link

AMD Threadripper/EPYC Xen patch for iommu not applied to 4.0.4 ? #6439

Closed johnr14 closed 3 years ago

johnr14 commented 3 years ago

Qubes OS version

R4.0.4

Affected component(s) or functionality

Reporting message that iommu AMD-Vi is not enabled at install. Fail to start sys-net and sys-vm after install.

Brief summary

There used to be a Xen patch to enable iommu on AMD EPYC/THREADRIPPER. Has this patch been removed from the later builds ? Issue : #4407 mentions it. I just booted 4.0.4 and had the same msg about iommu not working.

Model name:
AMD Ryzen Threadripper 1900X 8-Core Processor Asus X399 Prime

How Reproducible

Tried it twice then looked up for info and came to the issue mentioned before.

To Reproduce

Steps to reproduce the behavior:

  1. Boot in legacy mode
  2. Enter setup
  3. Install

Expected behavior

Install without iommu error message and get Qubes working as normal.

Actual behavior

Got an error msg during install about iommu not available. VMs will not start in HMV.

Screenshots

Additional context

Complete xl dmesg ``` Xen 4.8.5-30.fc25 (XEN) Xen version 4.8.5-30.fc25 (user@) (gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1)) debug=n Thu Feb 18 15:14:03 UTC 2021 (XEN) Latest ChangeSet: (XEN) Bootloader: GRUB 2.02~beta3 (XEN) Command line: placeholder console=none dom0_mem=min:1024M dom0_mem=max:4096M iommu=no-igfx ucode=scan smt=on amd_iommu=on smt=off (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 7 MBR signatures (XEN) Found 6 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009d400 (usable) (XEN) 000000000009d400 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 0000000009df0000 (usable) (XEN) 0000000009df0000 - 000000000a000000 (reserved) (XEN) 000000000a000000 - 000000000b000000 (usable) (XEN) 000000000b000000 - 000000000b020000 (reserved) (XEN) 000000000b020000 - 00000000767d1000 (usable) (XEN) 00000000767d1000 - 0000000077cc8000 (reserved) (XEN) 0000000077cc8000 - 0000000077cf3000 (ACPI data) (XEN) 0000000077cf3000 - 00000000781a5000 (ACPI NVS) (XEN) 00000000781a5000 - 000000007956c000 (reserved) (XEN) 000000007956c000 - 000000007c000000 (usable) (XEN) 000000007c000000 - 0000000080000000 (reserved) (XEN) 00000000b7a00000 - 00000000b7a01000 (reserved) (XEN) 00000000b7b00000 - 00000000b7b80000 (reserved) (XEN) 00000000ef800000 - 00000000ef900000 (reserved) (XEN) 00000000efc00000 - 00000000efc01000 (reserved) (XEN) 00000000efd00000 - 00000000efd80000 (reserved) (XEN) 00000000fea00000 - 00000000feb00000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fec10000 - 00000000fec11000 (reserved) (XEN) 00000000fec30000 - 00000000fec31000 (reserved) (XEN) 00000000fed00000 - 00000000fed01000 (reserved) (XEN) 00000000fed40000 - 00000000fed45000 (reserved) (XEN) 00000000fed80000 - 00000000fed90000 (reserved) (XEN) 00000000fedc0000 - 00000000fedc1000 (reserved) (XEN) 00000000fedc2000 - 00000000fedd0000 (reserved) (XEN) 00000000fedd4000 - 00000000fedd6000 (reserved) (XEN) 00000000fee00000 - 00000000fef00000 (reserved) (XEN) 00000000ff000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 000000087f300000 (usable) (XEN) 000000087f300000 - 0000000880000000 (reserved) (XEN) ACPI: RSDP 000F05B0, 0024 (r2 AMD) (XEN) ACPI: XSDT 77CD0098, 00AC (r1 AMD A M I 3242016 AMI 10013) (XEN) ACPI: FACP 77CE1F48, 0114 (r6 AMD A M I 3242016 AMI 10013) (XEN) ACPI: DSDT 77CD01E0, 11D67 (r2 AMD A M I 3242016 INTL 20120913) (XEN) ACPI: FACS 781A2700, 0040 (XEN) ACPI: APIC 77CE2060, 046A (r3 AMD A M I 3242016 AMI 10013) (XEN) ACPI: FPDT 77CE24D0, 0044 (r1 AMD A M I 3242016 AMI 10013) (XEN) ACPI: FIDT 77CE2518, 009C (r1 AMD A M I 3242016 AMI 10013) (XEN) ACPI: SSDT 77CE25B8, 00FC (r2 AMD CPUSSDT 3242016 AMI 3242016) (XEN) ACPI: SSDT 77CF2728, 00F8 (r1 AMD AMD PT 1000 INTL 20120913) (XEN) ACPI: SSDT 77CE2710, 8C4C (r2 AMD AMD ALIB 2 MSFT 4000000) (XEN) ACPI: SSDT 77CEB360, 2C23 (r1 AMD AMD AOD 1 INTL 20120913) (XEN) ACPI: MCFG 77CEDF88, 003C (r1 AMD A M I 3242016 MSFT 10013) (XEN) ACPI: SSDT 77CEDFC8, 1BF4 (r1 AMD AMD CPU 1 AMD 1) (XEN) ACPI: CRAT 77CEFBC0, 0F78 (r1 AMD AMD CRAT 1 AMD 1) (XEN) ACPI: CDIT 77CF0B38, 0029 (r1 AMD AMD CDIT 1 AMD 1) (XEN) ACPI: HPET 77CF0B68, 0038 (r1 AMD A M I 3242016 AMI 5) (XEN) ACPI: SSDT 77CF0BA0, 0024 (r1 AMDFCH FCHZP 1000 INTL 20120913) (XEN) ACPI: UEFI 77CF0BC8, 0042 (r1 AMD A M I 2 1000013) (XEN) ACPI: IVRS 77CF0C10, 00D0 (r2 AMD AMD IVRS 1 AMD 0) (XEN) ACPI: SSDT 77CF0CE0, 1A41 (r1 AMD AmdTable 1 INTL 20120913) (XEN) System RAM: 32642MB (33426248kB) (XEN) Domain heap initialised (XEN) ACPI: 32/64X FACS address mismatch in FADT - 781a2700/0000000000000000, using 32 (XEN) IOAPIC[0]: apic_id 128, version 33, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 129, version 33, address 0xefc00000, GSI 24-55 (XEN) IOAPIC[2]: apic_id 130, version 33, address 0xb7a00000, GSI 56-87 (XEN) Enabling APIC mode: Phys. Using 3 I/O APICs (XEN) xstate: size: 0x340 and states: 0x7 (XEN) Speculative mitigation facilities: (XEN) Hardware features: IBPB (XEN) Compiled-in support: INDIRECT_THUNK (XEN) Xen settings: BTI-Thunk LFENCE, SPEC_CTRL: No, Other: IBPB (XEN) Support for VMs: PV: RSB, HVM: RSB (XEN) XPTI (64-bit PV only): Dom0 disabled, DomU disabled (XEN) PV L1TF shadowing: Dom0 disabled, DomU disabled (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Platform timer is 14.318MHz HPET (XEN) Detected 4000.207 MHz processor. (XEN) Initing memory sharing. (XEN) PCI: Not using MCFG for segment 0000 bus 00-7f (XEN) IVHD Error: no information for IO-APIC 0x82 (XEN) AMD-Vi: Error initialization (XEN) I/O virtualisation disabled (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Allocated console ring of 32 KiB. (XEN) HVM: ASIDs enabled. (XEN) SVM: Supported advanced features: (XEN) - Nested Page Tables (NPT) (XEN) - Last Branch Record (LBR) Virtualisation (XEN) - Next-RIP Saved on #VMEXIT (XEN) - VMCB Clean Bits (XEN) - DecodeAssists (XEN) - Pause-Intercept Filter (XEN) - TSC Rate MSR (XEN) HVM: SVM enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) Brought up 8 CPUs (XEN) mtrr: your CPUs had inconsistent variable MTRR settings (XEN) Dom0 has maximum 1048 PIRQs (XEN) *** LOADING DOMAIN 0 *** (XEN) ELF: phdr: paddr=0x1000000 memsz=0x14658f0 (XEN) ELF: phdr: paddr=0x2600000 memsz=0x616000 (XEN) ELF: phdr: paddr=0x2c16000 memsz=0x2b000 (XEN) ELF: phdr: paddr=0x2c41000 memsz=0xdbf000 (XEN) ELF: memory: 0x1000000 -> 0x3a00000 (XEN) ELF: note: GUEST_OS = "linux" (XEN) ELF: note: GUEST_VERSION = "2.6" (XEN) ELF: note: XEN_VERSION = "xen-3.0" (XEN) ELF: note: VIRT_BASE = 0xffffffff80000000 (XEN) ELF: note: INIT_P2M = 0x8000000000 (XEN) ELF: note: ENTRY = 0xffffffff82c41180 (XEN) ELF: note: HYPERCALL_PAGE = 0xffffffff81001000 (XEN) ELF: note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) ELF: note: SUPPORTED_FEATURES = 0x8801 (XEN) ELF: note: PAE_MODE = "yes" (XEN) ELF: note: LOADER = "generic" (XEN) ELF: note: unknown (0xd) (XEN) ELF: note: SUSPEND_CANCEL = 0x1 (XEN) ELF: note: MOD_START_PFN = 0x1 (XEN) ELF: note: HV_START_LOW = 0xffff800000000000 (XEN) ELF: note: PADDR_OFFSET = 0 (XEN) ELF: note: PHYS32_ENTRY = 0x10005c0 (XEN) ELF: Found PVH image (XEN) ELF: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff83a00000 (XEN) virt_entry = 0xffffffff82c41180 (XEN) p2m_base = 0x8000000000 (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x3a00000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000854000000->0000000858000000 (1023548 pages to be allocated) (XEN) Init. ramdisk: 000000087d03c000->000000087f1ff0ec (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff83a00000 (XEN) Init. ramdisk: 0000000000000000->0000000000000000 (XEN) Phys-Mach map: 0000008000000000->0000008000800000 (XEN) Start info: ffffffff83a00000->ffffffff83a004b8 (XEN) Page tables: ffffffff83a01000->ffffffff83a22000 (XEN) Boot stack: ffffffff83a22000->ffffffff83a23000 (XEN) TOTAL: ffffffff80000000->ffffffff83c00000 (XEN) ENTRY ADDRESS: ffffffff82c41180 (XEN) Dom0 has maximum 8 VCPUs (XEN) ELF: phdr 0 at 0xffffffff81000000 -> 0xffffffff824658f0 (XEN) ELF: phdr 1 at 0xffffffff82600000 -> 0xffffffff82c16000 (XEN) ELF: phdr 2 at 0xffffffff82c16000 -> 0xffffffff82c41000 (XEN) ELF: phdr 3 at 0xffffffff82c41000 -> 0xffffffff83a00000 (XEN) Scrubbing Free RAM on 1 nodes using 8 CPUs (XEN) ..................................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 320kB init memory ```
Complete dmesg ``` Linux version 5.4.98-1.fc25.qubes.x86_64 (user@build-fedora4) (gcc version 6.4.1 20170727 (Red Hat 6.4.1-1) (GCC)) #1 SMP Wed Feb 17 01:49:26 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/qubes_dom0-root ro rd.luks.uuid=luks-f8334f95-4733-449a-b1b0-aa88fd165525 rd.lvm.lv=qubes_dom0/root rd.lvm.lv=qubes_dom0/swap i915.alpha_support=1 plymouth.ignore-serial-consoles rhgb quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] Xen: [mem 0x000000000009d400-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000009deffff] usable [ 0.000000] Xen: [mem 0x0000000009df0000-0x0000000009ffffff] reserved [ 0.000000] Xen: [mem 0x000000000a000000-0x000000000affffff] usable [ 0.000000] Xen: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] Xen: [mem 0x000000000b020000-0x00000000767d0fff] usable [ 0.000000] Xen: [mem 0x00000000767d1000-0x0000000077cc7fff] reserved [ 0.000000] Xen: [mem 0x0000000077cc8000-0x0000000077cf2fff] ACPI data [ 0.000000] Xen: [mem 0x0000000077cf3000-0x00000000781a4fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000781a5000-0x000000007956bfff] reserved [ 0.000000] Xen: [mem 0x000000007956c000-0x000000007bffffff] usable [ 0.000000] Xen: [mem 0x000000007c000000-0x000000007fffffff] reserved [ 0.000000] Xen: [mem 0x00000000b7a00000-0x00000000b7a00fff] reserved [ 0.000000] Xen: [mem 0x00000000b7b00000-0x00000000b7b7ffff] reserved [ 0.000000] Xen: [mem 0x00000000ef800000-0x00000000ef8fffff] reserved [ 0.000000] Xen: [mem 0x00000000efc00000-0x00000000efc00fff] reserved [ 0.000000] Xen: [mem 0x00000000efd00000-0x00000000efd7ffff] reserved [ 0.000000] Xen: [mem 0x00000000fea00000-0x00000000feafffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] Xen: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] Xen: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved [ 0.000000] Xen: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] Xen: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000018702dfff] usable [ 0.000000] Xen: [mem 0x000000087f300000-0x000000087fffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: System manufacturer System Product Name/PRIME X399-A, BIOS 1203 10/09/2019 [ 0.000000] Hypervisor detected: Xen PV [ 0.005169] tsc: Fast TSC calibration failed [ 0.005170] tsc: Detected 4000.204 MHz processor [ 0.013535] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.013536] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.013543] last_pfn = 0x18702e max_arch_pfn = 0x400000000 [ 0.013544] Disabled [ 0.013545] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.013546] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.013548] last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.305893] RAMDISK: [mem 0x04000000-0x061c3fff] [ 0.305904] ACPI: Early table checksum verification disabled [ 0.306466] ACPI: RSDP 0x00000000000F05B0 000024 (v02 AMD ) [ 0.306471] ACPI: XSDT 0x0000000077CD0098 0000AC (v01 AMD A M I 03242016 AMI 00010013) [ 0.306496] ACPI: FACP 0x0000000077CE1F48 000114 (v06 AMD A M I 03242016 AMI 00010013) [ 0.306578] ACPI: DSDT 0x0000000077CD01E0 011D67 (v02 AMD A M I 03242016 INTL 20120913) [ 0.306583] ACPI: FACS 0x00000000781A2700 000040 [ 0.306589] ACPI: APIC 0x0000000077CE2060 00046A (v03 AMD A M I 03242016 AMI 00010013) [ 0.306594] ACPI: FPDT 0x0000000077CE24D0 000044 (v01 AMD A M I 03242016 AMI 00010013) [ 0.306600] ACPI: FIDT 0x0000000077CE2518 00009C (v01 AMD A M I 03242016 AMI 00010013) [ 0.306605] ACPI: SSDT 0x0000000077CE25B8 0000FC (v02 AMD CPUSSDT 03242016 AMI 03242016) [ 0.306612] ACPI: SSDT 0x0000000077CF2728 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.306618] ACPI: SSDT 0x0000000077CE2710 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000) [ 0.306625] ACPI: SSDT 0x0000000077CEB360 002C23 (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.306631] ACPI: MCFG 0x0000000077CEDF88 00003C (v01 AMD A M I 03242016 MSFT 00010013) [ 0.306637] ACPI: SSDT 0x0000000077CEDFC8 001BF4 (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.306644] ACPI: CRAT 0x0000000077CEFBC0 000F78 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.306650] ACPI: CDIT 0x0000000077CF0B38 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.306656] ACPI: HPET 0x0000000077CF0B68 000038 (v01 AMD A M I 03242016 AMI 00000005) [ 0.306662] ACPI: SSDT 0x0000000077CF0BA0 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) [ 0.306668] ACPI: UEFI 0x0000000077CF0BC8 000042 (v01 AMD A M I 00000002 01000013) [ 0.306674] ACPI: IVRS 0x0000000077CF0C10 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.306679] ACPI: SSDT 0x0000000077CF0CE0 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.306695] ACPI: Local APIC address 0xfee00000 [ 0.306695] Setting APIC routing to Xen PV. [ 0.306757] NUMA turned off [ 0.306757] Faking a node at [mem 0x0000000000000000-0x000000018702dfff] [ 0.306765] NODE_DATA(0) allocated [mem 0x7b7f9000-0x7b823fff] [ 0.319426] Zone ranges: [ 0.319428] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.319429] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.319430] Normal [mem 0x0000000100000000-0x000000018702dfff] [ 0.319431] Device empty [ 0.319432] Movable zone start for each node [ 0.319434] Early memory node ranges [ 0.319434] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.319435] node 0: [mem 0x0000000000100000-0x0000000009deffff] [ 0.319436] node 0: [mem 0x000000000a000000-0x000000000affffff] [ 0.319436] node 0: [mem 0x000000000b020000-0x00000000767d0fff] [ 0.319437] node 0: [mem 0x000000007956c000-0x000000007bffffff] [ 0.319438] node 0: [mem 0x0000000100000000-0x000000018702dfff] [ 0.319632] Zeroed struct page in unavailable ranges: 32769 pages [ 0.319633] Initmem setup node 0 [mem 0x0000000000001000-0x000000018702dfff] [ 0.319635] On node 0 totalpages: 1048575 [ 0.319636] DMA zone: 64 pages used for memmap [ 0.319636] DMA zone: 21 pages reserved [ 0.319637] DMA zone: 3996 pages, LIFO batch:0 [ 0.319683] DMA32 zone: 7681 pages used for memmap [ 0.319683] DMA32 zone: 491573 pages, LIFO batch:63 [ 0.328225] Normal zone: 8641 pages used for memmap [ 0.328227] Normal zone: 553006 pages, LIFO batch:63 [ 0.334352] p2m virtual area at (____ptrval____), size is e00000 [ 0.601300] Remapped 553006 page(s) [ 0.602276] ACPI: PM-Timer IO Port: 0x808 [ 0.602280] ACPI: Local APIC address 0xfee00000 [ 0.602825] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.602887] IOAPIC[0]: apic_id 128, version 33, address 0xfec00000, GSI 0-23 [ 0.602893] IOAPIC[1]: apic_id 129, version 33, address 0xefc00000, GSI 24-55 [ 0.602899] IOAPIC[2]: apic_id 130, version 33, address 0xb7a00000, GSI 56-87 [ 0.602935] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.602937] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.602939] ACPI: IRQ0 used by override. [ 0.602940] ACPI: IRQ9 used by override. [ 0.602975] Using ACPI (MADT) for SMP configuration information [ 0.602978] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.602985] smpboot: Allowing 128 CPUs, 112 hotplug CPUs [ 0.603015] [mem 0xb7b80000-0xef7fffff] available for PCI devices [ 0.603017] Booting paravirtualized kernel on Xen [ 0.603018] Xen version: 4.8.5-30.fc25 (preserve-AD) [ 0.603020] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.687769] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:1 [ 0.692488] percpu: Embedded 52 pages/cpu s176128 r8192 d28672 u262144 [ 0.692501] pcpu-alloc: s176128 r8192 d28672 u262144 alloc=1*2097152 [ 0.692502] pcpu-alloc: [0] 000 001 002 003 004 005 006 007 [ 0.692504] pcpu-alloc: [0] 008 009 010 011 012 013 014 015 [ 0.692506] pcpu-alloc: [0] 016 017 018 019 020 021 022 023 [ 0.692507] pcpu-alloc: [0] 024 025 026 027 028 029 030 031 [ 0.692509] pcpu-alloc: [0] 032 033 034 035 036 037 038 039 [ 0.692510] pcpu-alloc: [0] 040 041 042 043 044 045 046 047 [ 0.692512] pcpu-alloc: [0] 048 049 050 051 052 053 054 055 [ 0.692513] pcpu-alloc: [0] 056 057 058 059 060 061 062 063 [ 0.692514] pcpu-alloc: [0] 064 065 066 067 068 069 070 071 [ 0.692516] pcpu-alloc: [0] 072 073 074 075 076 077 078 079 [ 0.692517] pcpu-alloc: [0] 080 081 082 083 084 085 086 087 [ 0.692518] pcpu-alloc: [0] 088 089 090 091 092 093 094 095 [ 0.692520] pcpu-alloc: [0] 096 097 098 099 100 101 102 103 [ 0.692521] pcpu-alloc: [0] 104 105 106 107 108 109 110 111 [ 0.692523] pcpu-alloc: [0] 112 113 114 115 116 117 118 119 [ 0.692524] pcpu-alloc: [0] 120 121 122 123 124 125 126 127 [ 0.692601] xen: PV spinlocks enabled [ 0.692605] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.692610] Built 1 zonelists, mobility grouping on. Total pages: 1032168 [ 0.692610] Policy zone: Normal [ 0.692612] Kernel command line: placeholder root=/dev/mapper/qubes_dom0-root ro rd.luks.uuid=luks-f8334f95-4733-449a-b1b0-aa88fd165525 rd.lvm.lv=qubes_dom0/root rd.lvm.lv=qubes_dom0/swap i915.alpha_support=1 plymouth.ignore-serial-consoles rhgb quiet [ 0.693051] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.693225] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.693339] mem auto-init: stack:byref_all, heap alloc:off, heap free:off [ 0.725299] software IO TLB: mapped [mem 0x180a00000-0x184a00000] (64MB) [ 0.732614] Memory: 3939616K/4194300K available (14339K kernel code, 2232K rwdata, 4504K rodata, 3016K init, 5056K bss, 254684K reserved, 0K cma-reserved) [ 0.732620] random: get_random_u64 called from __kmem_cache_create+0x3f/0x560 with crng_init=0 [ 0.732759] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.732976] ftrace: allocating 40876 entries in 160 pages [ 0.742615] rcu: Hierarchical RCU implementation. [ 0.742616] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.742617] Tasks RCU enabled. [ 0.742617] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.742617] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.744954] Using NULL legacy PIC [ 0.744955] NR_IRQS: 524544, nr_irqs: 1576, preallocated irqs: 0 [ 0.744983] xen:events: Using FIFO-based ABI [ 0.744998] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.745002] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.745006] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.745009] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.745013] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.745016] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.745020] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.745024] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.745027] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.745031] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.745034] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.745038] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.745041] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.745045] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.745048] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.745132] random: crng done (trusting CPU's manufacturer) [ 0.747161] Console: colour VGA+ 80x25 [ 0.747164] printk: console [tty0] enabled [ 0.747165] printk: console [hvc0] enabled [ 0.747180] ACPI: Core revision 20190816 [ 0.764595] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.764601] Xen: using vcpuop timer interface [ 0.764603] installing Xen timer for CPU 0 [ 0.764619] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a91dc9111, max_idle_ns: 440795393621 ns [ 0.764621] Calibrating delay loop (skipped), value calculated using timer frequency.. 8000.40 BogoMIPS (lpj=4000204) [ 0.764622] pid_max: default: 32768 minimum: 301 [ 0.764654] LSM: Security Framework initializing [ 0.764659] Yama: becoming mindful. [ 0.764686] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.764692] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.764705] *** VALIDATE tmpfs *** [ 0.764829] *** VALIDATE proc *** [ 0.764886] *** VALIDATE cgroup1 *** [ 0.764886] *** VALIDATE cgroup2 *** [ 0.764975] LVT offset 1 assigned for vector 0xf9 [ 0.764976] [Firmware Bug]: cpu 0, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.764977] mce: [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.764981] [Firmware Bug]: cpu 0, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.764982] mce: [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.764984] LVT offset 2 assigned for vector 0xf4 [ 0.764984] [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.764989] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.764989] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.764991] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.764992] Spectre V2 : Mitigation: Full AMD retpoline [ 0.764992] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.764993] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.764994] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.765145] Freeing SMP alternatives memory: 32K [ 0.766677] cpu 0 spinlock event irq 89 [ 0.766681] VPMU disabled by hypervisor. [ 0.766805] Performance Events: PMU not available due to virtualization, using software events only. [ 0.766842] rcu: Hierarchical SRCU implementation. [ 0.767228] NMI watchdog: Perf NMI watchdog permanently disabled [ 0.767300] smp: Bringing up secondary CPUs ... [ 0.767374] installing Xen timer for CPU 1 [ 0.020566] [Firmware Bug]: cpu 1, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 1, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 1, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 1, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 1, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.767504] cpu 1 spinlock event irq 101 [ 0.767626] installing Xen timer for CPU 2 [ 0.020566] [Firmware Bug]: cpu 2, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 2, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 2, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 2, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 2, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.767748] cpu 2 spinlock event irq 108 [ 0.767748] installing Xen timer for CPU 3 [ 0.020566] [Firmware Bug]: cpu 3, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 3, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 3, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 3, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 3, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.767820] cpu 3 spinlock event irq 115 [ 0.767820] installing Xen timer for CPU 4 [ 0.020566] [Firmware Bug]: cpu 4, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 4, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 4, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 4, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 4, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.767872] cpu 4 spinlock event irq 122 [ 0.767872] installing Xen timer for CPU 5 [ 0.020566] [Firmware Bug]: cpu 5, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 5, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 5, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 5, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 5, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.768654] cpu 5 spinlock event irq 129 [ 0.768705] installing Xen timer for CPU 6 [ 0.020566] [Firmware Bug]: cpu 6, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 6, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 6, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 6, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 6, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.768842] cpu 6 spinlock event irq 136 [ 0.768842] installing Xen timer for CPU 7 [ 0.020566] [Firmware Bug]: cpu 7, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 7, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 7, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.020566] mce: [Firmware Bug]: cpu 7, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.020566] [Firmware Bug]: cpu 7, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.768855] cpu 7 spinlock event irq 143 [ 0.768855] smp: Brought up 1 node, 8 CPUs [ 0.768855] smpboot: Max logical packages: 16 [ 0.768904] devtmpfs: initialized [ 0.769646] x86/mm: Memory block size: 128MB [ 0.770007] PM: Registering ACPI NVS region [mem 0x77cf3000-0x781a4fff] (4923392 bytes) [ 0.770007] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.770007] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.770007] pinctrl core: initialized pinctrl subsystem [ 0.770007] PM: RTC time: 09:41:27, date: 2021-03-05 [ 0.770007] NET: Registered protocol family 16 [ 0.770007] xen:grant_table: Grant tables using version 1 layout [ 0.770007] Grant table initialized [ 0.770076] audit: initializing netlink subsys (disabled) [ 0.770631] audit: type=2000 audit(1614937288.016:1): state=initialized audit_enabled=0 res=1 [ 0.770705] ACPI: bus type PCI registered [ 0.770803] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.770805] PCI: not using MMCONFIG [ 0.770806] PCI: Using configuration type 1 for base access [ 0.770806] PCI: Using configuration type 1 for extended access [ 0.859777] cryptd: max_cpu_qlen set to 1000 [ 0.863940] alg: No test for 842 (842-generic) [ 0.864624] alg: No test for 842 (842-scomp) [ 0.866746] ACPI: Added _OSI(Module Device) [ 0.866746] ACPI: Added _OSI(Processor Device) [ 0.866746] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.866746] ACPI: Added _OSI(Processor Aggregator Device) [ 0.866746] ACPI: Added _OSI(Linux-Dell-Video) [ 0.866746] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.866746] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.886947] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.887782] xen: registering gsi 9 triggering 0 polarity 1 [ 0.893060] ACPI: EC: EC started [ 0.893061] ACPI: EC: interrupt blocked [ 0.893118] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC [ 0.893119] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.893120] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.893120] ACPI: Interpreter enabled [ 0.893130] ACPI: (supports S0 S3 S5) [ 0.893131] ACPI: Using IOAPIC for interrupt routing [ 0.893543] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.893587] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources [ 0.904657] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.905202] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.913038] ACPI: Power Resource [P0SA] (off) [ 0.913055] ACPI: Power Resource [P3SA] (off) [ 0.915069] ACPI: Power Resource [P0SA] (off) [ 0.915088] ACPI: Power Resource [P3SA] (off) [ 0.921221] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.921225] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.921416] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.921598] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.921788] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x2fff]; [io 0x0000-0x2fff window] ignored [ 0.921833] PCI host bridge to bus 0000:00 [ 0.921834] pci_bus 0000:00: root bus resource [io 0x0000-0x2fff] [ 0.921835] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.921836] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.921837] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.921837] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.921838] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.921839] pci_bus 0000:00: root bus resource [mem 0xb8000000-0xd9ffffff window] [ 0.921840] pci_bus 0000:00: root bus resource [mem 0x880000000-0x443fffffff window] [ 0.921841] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.921851] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 [ 0.921968] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 [ 0.922112] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.922205] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400 [ 0.922710] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.922854] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 [ 0.922957] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 [ 0.923047] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 [ 0.923703] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.923844] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 [ 0.923952] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 [ 0.924041] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 [ 0.924097] pci 0000:00:07.1: enabling Extended Tags [ 0.924688] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.924824] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.924915] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 [ 0.924972] pci 0000:00:08.1: enabling Extended Tags [ 0.925077] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.925676] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.925905] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.926140] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 [ 0.926216] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 [ 0.926293] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 [ 0.926369] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 [ 0.926444] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 [ 0.926520] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 [ 0.926595] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 [ 0.926675] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 [ 0.926753] pci 0000:00:19.0: [1022:1460] type 00 class 0x060000 [ 0.926833] pci 0000:00:19.1: [1022:1461] type 00 class 0x060000 [ 0.926912] pci 0000:00:19.2: [1022:1462] type 00 class 0x060000 [ 0.926992] pci 0000:00:19.3: [1022:1463] type 00 class 0x060000 [ 0.927071] pci 0000:00:19.4: [1022:1464] type 00 class 0x060000 [ 0.927150] pci 0000:00:19.5: [1022:1465] type 00 class 0x060000 [ 0.927230] pci 0000:00:19.6: [1022:1466] type 00 class 0x060000 [ 0.927309] pci 0000:00:19.7: [1022:1467] type 00 class 0x060000 [ 0.927599] pci 0000:01:00.0: [1022:43ba] type 00 class 0x0c0330 [ 0.927631] pci 0000:01:00.0: reg 0x10: [mem 0xd9ca0000-0xd9ca7fff 64bit] [ 0.927752] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.927873] pci 0000:01:00.1: [1022:43b6] type 00 class 0x010601 [ 0.927945] pci 0000:01:00.1: reg 0x24: [mem 0xd9c80000-0xd9c9ffff] [ 0.927956] pci 0000:01:00.1: reg 0x30: [mem 0xd9c00000-0xd9c7ffff pref] [ 0.928018] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 0.928114] pci 0000:01:00.2: [1022:43b1] type 01 class 0x060400 [ 0.928242] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 0.928370] pci 0000:00:01.1: PCI bridge to [bus 01-08] [ 0.928375] pci 0000:00:01.1: bridge window [io 0x2000-0x2fff] [ 0.928378] pci 0000:00:01.1: bridge window [mem 0xd9a00000-0xd9cfffff] [ 0.928449] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400 [ 0.928592] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.928708] pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400 [ 0.928852] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 0.928963] pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400 [ 0.929106] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 0.929220] pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400 [ 0.929363] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 0.929475] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400 [ 0.929619] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 0.929741] pci 0000:02:09.0: [1022:43b4] type 01 class 0x060400 [ 0.929884] pci 0000:02:09.0: PME# supported from D3hot D3cold [ 0.930017] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 0.930024] pci 0000:01:00.2: bridge window [io 0x2000-0x2fff] [ 0.930027] pci 0000:01:00.2: bridge window [mem 0xd9a00000-0xd9bfffff] [ 0.930075] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.930134] pci 0000:02:01.0: PCI bridge to [bus 04] [ 0.930224] pci 0000:05:00.0: [8086:1539] type 00 class 0x020000 [ 0.930276] pci 0000:05:00.0: reg 0x10: [mem 0xd9b00000-0xd9b1ffff] [ 0.930316] pci 0000:05:00.0: reg 0x18: [io 0x2000-0x201f] [ 0.930336] pci 0000:05:00.0: reg 0x1c: [mem 0xd9b20000-0xd9b23fff] [ 0.930545] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.930783] pci 0000:02:02.0: PCI bridge to [bus 05] [ 0.930790] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] [ 0.930794] pci 0000:02:02.0: bridge window [mem 0xd9b00000-0xd9bfffff] [ 0.930846] pci 0000:02:03.0: PCI bridge to [bus 06] [ 0.930907] pci 0000:02:04.0: PCI bridge to [bus 07] [ 0.930998] pci 0000:08:00.0: [1b21:2142] type 00 class 0x0c0330 [ 0.931045] pci 0000:08:00.0: reg 0x10: [mem 0xd9a00000-0xd9a07fff 64bit] [ 0.931646] pci 0000:08:00.0: PME# supported from D0 [ 0.931708] pci 0000:08:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x2 link at 0000:02:09.0 (capable of 15.752 Gb/s with 8 GT/s x2 link) [ 0.931897] pci 0000:02:09.0: PCI bridge to [bus 08] [ 0.931907] pci 0000:02:09.0: bridge window [mem 0xd9a00000-0xd9afffff] [ 0.932038] pci 0000:09:00.0: [1022:1470] type 01 class 0x060400 [ 0.932064] pci 0000:09:00.0: reg 0x10: [mem 0xd9e00000-0xd9e03fff] [ 0.932178] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.932304] pci 0000:00:03.1: PCI bridge to [bus 09-0b] [ 0.932309] pci 0000:00:03.1: bridge window [io 0x1000-0x1fff] [ 0.932311] pci 0000:00:03.1: bridge window [mem 0xd9d00000-0xd9efffff] [ 0.932316] pci 0000:00:03.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.932367] pci 0000:0a:00.0: [1022:1471] type 01 class 0x060400 [ 0.932499] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold [ 0.932615] pci 0000:09:00.0: PCI bridge to [bus 0a-0b] [ 0.932623] pci 0000:09:00.0: bridge window [io 0x1000-0x1fff] [ 0.932626] pci 0000:09:00.0: bridge window [mem 0xd9d00000-0xd9dfffff] [ 0.932632] pci 0000:09:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.932684] pci 0000:0b:00.0: [1002:687f] type 00 class 0x030000 [ 0.932717] pci 0000:0b:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.932732] pci 0000:0b:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.932742] pci 0000:0b:00.0: reg 0x20: [io 0x1000-0x10ff] [ 0.932753] pci 0000:0b:00.0: reg 0x24: [mem 0xd9d00000-0xd9d7ffff] [ 0.932763] pci 0000:0b:00.0: reg 0x30: [mem 0xd9d80000-0xd9d9ffff pref] [ 0.932850] pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.932966] pci 0000:0b:00.1: [1002:aaf8] type 00 class 0x040300 [ 0.932990] pci 0000:0b:00.1: reg 0x10: [mem 0xd9da0000-0xd9da3fff] [ 0.933118] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.933240] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 0.933246] pci 0000:0a:00.0: bridge window [io 0x1000-0x1fff] [ 0.933250] pci 0000:0a:00.0: bridge window [mem 0xd9d00000-0xd9dfffff] [ 0.933256] pci 0000:0a:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.933571] pci 0000:0c:00.0: [1022:145a] type 00 class 0x130000 [ 0.933638] pci 0000:0c:00.0: enabling Extended Tags [ 0.933754] pci 0000:0c:00.2: [1022:1456] type 00 class 0x108000 [ 0.933786] pci 0000:0c:00.2: reg 0x18: [mem 0xd9800000-0xd98fffff] [ 0.933808] pci 0000:0c:00.2: reg 0x24: [mem 0xd9900000-0xd9901fff] [ 0.933822] pci 0000:0c:00.2: enabling Extended Tags [ 0.933955] pci 0000:0c:00.3: [1022:145c] type 00 class 0x0c0330 [ 0.933977] pci 0000:0c:00.3: reg 0x10: [mem 0xd9700000-0xd97fffff 64bit] [ 0.934020] pci 0000:0c:00.3: enabling Extended Tags [ 0.934070] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold [ 0.934167] pci 0000:00:07.1: PCI bridge to [bus 0c] [ 0.934174] pci 0000:00:07.1: bridge window [mem 0xd9700000-0xd99fffff] [ 0.934569] pci 0000:0d:00.0: [1022:1455] type 00 class 0x130000 [ 0.934639] pci 0000:0d:00.0: enabling Extended Tags [ 0.934760] pci 0000:0d:00.2: [1022:7901] type 00 class 0x010601 [ 0.934816] pci 0000:0d:00.2: reg 0x24: [mem 0xd9f08000-0xd9f08fff] [ 0.934830] pci 0000:0d:00.2: enabling Extended Tags [ 0.934885] pci 0000:0d:00.2: PME# supported from D3hot D3cold [ 0.934971] pci 0000:0d:00.3: [1022:1457] type 00 class 0x040300 [ 0.934989] pci 0000:0d:00.3: reg 0x10: [mem 0xd9f00000-0xd9f07fff] [ 0.935040] pci 0000:0d:00.3: enabling Extended Tags [ 0.935092] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold [ 0.935194] pci 0000:00:08.1: PCI bridge to [bus 0d] [ 0.935201] pci 0000:00:08.1: bridge window [mem 0xd9f00000-0xd9ffffff] [ 0.935341] xen: registering gsi 8 triggering 1 polarity 0 [ 0.935670] ACPI: PCI Root Bridge [S0D1] (domain 0000 [bus 40-ff]) [ 0.935672] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.935903] acpi PNP0A08:01: _OSC: platform does not support [LTR] [ 0.936122] acpi PNP0A08:01: _OSC: OS now controls [PME AER PCIeCapability] [ 0.936130] acpi PNP0A08:01: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.936344] PCI host bridge to bus 0000:40 [ 0.936345] pci_bus 0000:40: root bus resource [io 0x3000-0xffff window] [ 0.936346] pci_bus 0000:40: root bus resource [mem 0x80000000-0x827fffff window] [ 0.936347] pci_bus 0000:40: root bus resource [mem 0x4440000000-0x7fffffffff window] [ 0.936348] pci_bus 0000:40: root bus resource [bus 40-ff] [ 0.936355] pci 0000:40:00.0: [1022:1450] type 00 class 0x060000 [ 0.936459] pci 0000:40:00.2: [1022:1451] type 00 class 0x080600 [ 0.936618] pci 0000:40:01.0: [1022:1452] type 00 class 0x060000 [ 0.936713] pci 0000:40:01.1: [1022:1453] type 01 class 0x060400 [ 0.936884] pci 0000:40:01.1: PME# supported from D0 D3hot D3cold [ 0.937448] pci 0000:40:01.2: [1022:1453] type 01 class 0x060400 [ 0.937615] pci 0000:40:01.2: PME# supported from D0 D3hot D3cold [ 0.937758] pci 0000:40:02.0: [1022:1452] type 00 class 0x060000 [ 0.937862] pci 0000:40:03.0: [1022:1452] type 00 class 0x060000 [ 0.937954] pci 0000:40:03.1: [1022:1453] type 01 class 0x060400 [ 0.938477] pci 0000:40:03.1: PME# supported from D0 D3hot D3cold [ 0.938610] pci 0000:40:03.2: [1022:1453] type 01 class 0x060400 [ 0.938776] pci 0000:40:03.2: PME# supported from D0 D3hot D3cold [ 0.938914] pci 0000:40:04.0: [1022:1452] type 00 class 0x060000 [ 0.939022] pci 0000:40:07.0: [1022:1452] type 00 class 0x060000 [ 0.939113] pci 0000:40:07.1: [1022:1454] type 01 class 0x060400 [ 0.939351] pci 0000:40:07.1: enabling Extended Tags [ 0.939471] pci 0000:40:07.1: PME# supported from D0 D3hot D3cold [ 0.939607] pci 0000:40:08.0: [1022:1452] type 00 class 0x060000 [ 0.939703] pci 0000:40:08.1: [1022:1454] type 01 class 0x060400 [ 0.939762] pci 0000:40:08.1: enabling Extended Tags [ 0.939870] pci 0000:40:08.1: PME# supported from D0 D3hot D3cold [ 0.940571] pci 0000:41:00.0: [144d:a804] type 00 class 0x010802 [ 0.940602] pci 0000:41:00.0: reg 0x10: [mem 0x82700000-0x82703fff 64bit] [ 0.940852] pci 0000:40:01.1: PCI bridge to [bus 41] [ 0.940860] pci 0000:40:01.1: bridge window [mem 0x82700000-0x827fffff] [ 0.941368] pci 0000:42:00.0: [8086:0953] type 00 class 0x010802 [ 0.941397] pci 0000:42:00.0: reg 0x10: [mem 0x82610000-0x82613fff 64bit] [ 0.941442] pci 0000:42:00.0: reg 0x30: [mem 0x82600000-0x8260ffff pref] [ 0.941612] pci 0000:40:01.2: PCI bridge to [bus 42] [ 0.941619] pci 0000:40:01.2: bridge window [mem 0x82600000-0x826fffff] [ 0.941706] pci 0000:43:00.0: [126f:2262] type 00 class 0x010802 [ 0.941742] pci 0000:43:00.0: reg 0x10: [mem 0x82500000-0x82503fff 64bit] [ 0.942019] pci 0000:40:03.1: PCI bridge to [bus 43] [ 0.942027] pci 0000:40:03.1: bridge window [mem 0x82500000-0x825fffff] [ 0.942390] pci 0000:44:00.0: [126f:2262] type 00 class 0x010802 [ 0.942426] pci 0000:44:00.0: reg 0x10: [mem 0x82400000-0x82403fff 64bit] [ 0.942707] pci 0000:40:03.2: PCI bridge to [bus 44] [ 0.942715] pci 0000:40:03.2: bridge window [mem 0x82400000-0x824fffff] [ 0.942798] pci 0000:45:00.0: [1022:145a] type 00 class 0x130000 [ 0.942867] pci 0000:45:00.0: enabling Extended Tags [ 0.942987] pci 0000:45:00.2: [1022:1456] type 00 class 0x108000 [ 0.943021] pci 0000:45:00.2: reg 0x18: [mem 0x82100000-0x821fffff] [ 0.943044] pci 0000:45:00.2: reg 0x24: [mem 0x82200000-0x82201fff] [ 0.943059] pci 0000:45:00.2: enabling Extended Tags [ 0.943198] pci 0000:45:00.3: [1022:145c] type 00 class 0x0c0330 [ 0.943221] pci 0000:45:00.3: reg 0x10: [mem 0x82000000-0x820fffff 64bit] [ 0.943265] pci 0000:45:00.3: enabling Extended Tags [ 0.943318] pci 0000:45:00.3: PME# supported from D0 D3hot D3cold [ 0.943422] pci 0000:40:07.1: PCI bridge to [bus 45] [ 0.943429] pci 0000:40:07.1: bridge window [mem 0x82000000-0x822fffff] [ 0.943524] pci 0000:46:00.0: [1022:1455] type 00 class 0x130000 [ 0.943595] pci 0000:46:00.0: enabling Extended Tags [ 0.943723] pci 0000:46:00.2: [1022:7901] type 00 class 0x010601 [ 0.943781] pci 0000:46:00.2: reg 0x24: [mem 0x82300000-0x82300fff] [ 0.943796] pci 0000:46:00.2: enabling Extended Tags [ 0.943853] pci 0000:46:00.2: PME# supported from D3hot D3cold [ 0.943964] pci 0000:40:08.1: PCI bridge to [bus 46] [ 0.943972] pci 0000:40:08.1: bridge window [mem 0x82300000-0x823fffff] [ 0.944127] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.944195] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.944253] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.944324] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.944389] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.944437] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.944483] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.944530] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.944565] xen: registering gsi 7 triggering 0 polarity 1 [ 0.944681] xen: registering gsi 10 triggering 1 polarity 0 [ 0.945065] ACPI: EC: interrupt unblocked [ 0.945083] ACPI: EC: event unblocked [ 0.945091] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.945092] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events [ 0.945135] xen:balloon: Initialising balloon driver [ 0.945632] iommu: Default domain type: Translated [ 0.945640] pci 0000:0b:00.0: vgaarb: setting as boot VGA device [ 0.945640] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.945640] pci 0000:0b:00.0: vgaarb: bridge control possible [ 0.945641] vgaarb: loaded [ 0.945703] SCSI subsystem initialized [ 0.945710] libata version 3.00 loaded. [ 0.945710] ACPI: bus type USB registered [ 0.945710] usbcore: registered new interface driver usbfs [ 0.945710] usbcore: registered new interface driver hub [ 0.945715] usbcore: registered new device driver usb [ 0.950028] pps_core: LinuxPPS API ver. 1 registered [ 0.950028] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.950030] PTP clock support registered [ 0.950061] EDAC MC: Ver: 3.0.0 [ 0.950657] PCI: Using ACPI for IRQ routing [ 0.958331] PCI: pci_cache_line_size set to 64 bytes [ 0.958531] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.958533] e820: reserve RAM buffer [mem 0x09df0000-0x0bffffff] [ 0.958533] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.958534] e820: reserve RAM buffer [mem 0x767d1000-0x77ffffff] [ 0.958535] e820: reserve RAM buffer [mem 0x18702e000-0x187ffffff] [ 0.958618] NetLabel: Initializing [ 0.958618] NetLabel: domain hash size = 128 [ 0.958618] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.958628] NetLabel: unlabeled traffic allowed by default [ 0.959621] clocksource: Switched to clocksource tsc-early [ 0.967606] *** VALIDATE bpf *** [ 0.967656] VFS: Disk quotas dquot_6.6.0 [ 0.967668] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.967683] *** VALIDATE ramfs *** [ 0.967684] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.967698] pnp: PnP ACPI init [ 0.967846] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.967850] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.967965] system 00:01: [mem 0xefd00000-0xefd7ffff] has been reserved [ 0.967968] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.968033] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.968220] system 00:03: [io 0x02a0-0x02af] has been reserved [ 0.968221] system 00:03: [io 0x0230-0x023f] has been reserved [ 0.968222] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.968224] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.968573] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.968574] system 00:04: [io 0x040b] has been reserved [ 0.968575] system 00:04: [io 0x04d6] has been reserved [ 0.968575] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.968576] system 00:04: [io 0x0c14] has been reserved [ 0.968577] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.968578] system 00:04: [io 0x0c52] has been reserved [ 0.968578] system 00:04: [io 0x0c6c] has been reserved [ 0.968579] system 00:04: [io 0x0c6f] has been reserved [ 0.968580] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.968581] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.968581] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.968582] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.968583] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.968584] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.968584] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.968585] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.968586] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.968587] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.968588] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.968589] system 00:04: [mem 0xfec01000-0xfec01fff] has been reserved [ 0.968590] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.968590] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.968592] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.968593] system 00:04: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.968594] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.968595] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.968597] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.968754] system 00:05: [mem 0xb7b00000-0xb7b7ffff] has been reserved [ 0.968756] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.969235] pnp: PnP ACPI: found 6 devices [ 0.971243] thermal_sys: Registered thermal governor 'fair_share' [ 0.971244] thermal_sys: Registered thermal governor 'bang_bang' [ 0.971244] thermal_sys: Registered thermal governor 'step_wise' [ 0.971245] thermal_sys: Registered thermal governor 'user_space' [ 0.974327] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.974380] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.974397] pci 0000:02:01.0: PCI bridge to [bus 04] [ 0.974412] pci 0000:02:02.0: PCI bridge to [bus 05] [ 0.974415] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] [ 0.974420] pci 0000:02:02.0: bridge window [mem 0xd9b00000-0xd9bfffff] [ 0.974430] pci 0000:02:03.0: PCI bridge to [bus 06] [ 0.974444] pci 0000:02:04.0: PCI bridge to [bus 07] [ 0.974458] pci 0000:02:09.0: PCI bridge to [bus 08] [ 0.974463] pci 0000:02:09.0: bridge window [mem 0xd9a00000-0xd9afffff] [ 0.974473] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 0.974475] pci 0000:01:00.2: bridge window [io 0x2000-0x2fff] [ 0.974481] pci 0000:01:00.2: bridge window [mem 0xd9a00000-0xd9bfffff] [ 0.974490] pci 0000:00:01.1: PCI bridge to [bus 01-08] [ 0.974492] pci 0000:00:01.1: bridge window [io 0x2000-0x2fff] [ 0.974496] pci 0000:00:01.1: bridge window [mem 0xd9a00000-0xd9cfffff] [ 0.974504] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 0.974506] pci 0000:0a:00.0: bridge window [io 0x1000-0x1fff] [ 0.974511] pci 0000:0a:00.0: bridge window [mem 0xd9d00000-0xd9dfffff] [ 0.974514] pci 0000:0a:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.974520] pci 0000:09:00.0: PCI bridge to [bus 0a-0b] [ 0.974523] pci 0000:09:00.0: bridge window [io 0x1000-0x1fff] [ 0.974527] pci 0000:09:00.0: bridge window [mem 0xd9d00000-0xd9dfffff] [ 0.974531] pci 0000:09:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.974537] pci 0000:00:03.1: PCI bridge to [bus 09-0b] [ 0.974539] pci 0000:00:03.1: bridge window [io 0x1000-0x1fff] [ 0.974543] pci 0000:00:03.1: bridge window [mem 0xd9d00000-0xd9efffff] [ 0.974545] pci 0000:00:03.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.974550] pci 0000:00:07.1: PCI bridge to [bus 0c] [ 0.974554] pci 0000:00:07.1: bridge window [mem 0xd9700000-0xd99fffff] [ 0.974561] pci 0000:00:08.1: PCI bridge to [bus 0d] [ 0.974565] pci 0000:00:08.1: bridge window [mem 0xd9f00000-0xd9ffffff] [ 0.974573] pci_bus 0000:00: resource 4 [io 0x0000-0x2fff] [ 0.974574] pci_bus 0000:00: resource 5 [io 0x0000-0x03af window] [ 0.974575] pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7 window] [ 0.974576] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df window] [ 0.974577] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.974578] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.974578] pci_bus 0000:00: resource 10 [mem 0xb8000000-0xd9ffffff window] [ 0.974579] pci_bus 0000:00: resource 11 [mem 0x880000000-0x443fffffff window] [ 0.974580] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.974581] pci_bus 0000:01: resource 1 [mem 0xd9a00000-0xd9cfffff] [ 0.974582] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.974582] pci_bus 0000:02: resource 1 [mem 0xd9a00000-0xd9bfffff] [ 0.974583] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.974584] pci_bus 0000:05: resource 1 [mem 0xd9b00000-0xd9bfffff] [ 0.974585] pci_bus 0000:08: resource 1 [mem 0xd9a00000-0xd9afffff] [ 0.974586] pci_bus 0000:09: resource 0 [io 0x1000-0x1fff] [ 0.974586] pci_bus 0000:09: resource 1 [mem 0xd9d00000-0xd9efffff] [ 0.974587] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.974588] pci_bus 0000:0a: resource 0 [io 0x1000-0x1fff] [ 0.974589] pci_bus 0000:0a: resource 1 [mem 0xd9d00000-0xd9dfffff] [ 0.974589] pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.974590] pci_bus 0000:0b: resource 0 [io 0x1000-0x1fff] [ 0.974591] pci_bus 0000:0b: resource 1 [mem 0xd9d00000-0xd9dfffff] [ 0.974592] pci_bus 0000:0b: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.974593] pci_bus 0000:0c: resource 1 [mem 0xd9700000-0xd99fffff] [ 0.974593] pci_bus 0000:0d: resource 1 [mem 0xd9f00000-0xd9ffffff] [ 0.974632] pci 0000:40:01.1: PCI bridge to [bus 41] [ 0.974637] pci 0000:40:01.1: bridge window [mem 0x82700000-0x827fffff] [ 0.974644] pci 0000:40:01.2: PCI bridge to [bus 42] [ 0.974648] pci 0000:40:01.2: bridge window [mem 0x82600000-0x826fffff] [ 0.974655] pci 0000:40:03.1: PCI bridge to [bus 43] [ 0.974658] pci 0000:40:03.1: bridge window [mem 0x82500000-0x825fffff] [ 0.974665] pci 0000:40:03.2: PCI bridge to [bus 44] [ 0.974669] pci 0000:40:03.2: bridge window [mem 0x82400000-0x824fffff] [ 0.974676] pci 0000:40:07.1: PCI bridge to [bus 45] [ 0.974679] pci 0000:40:07.1: bridge window [mem 0x82000000-0x822fffff] [ 0.974687] pci 0000:40:08.1: PCI bridge to [bus 46] [ 0.974690] pci 0000:40:08.1: bridge window [mem 0x82300000-0x823fffff] [ 0.974697] pci_bus 0000:40: resource 4 [io 0x3000-0xffff window] [ 0.974698] pci_bus 0000:40: resource 5 [mem 0x80000000-0x827fffff window] [ 0.974699] pci_bus 0000:40: resource 6 [mem 0x4440000000-0x7fffffffff window] [ 0.974700] pci_bus 0000:41: resource 1 [mem 0x82700000-0x827fffff] [ 0.974701] pci_bus 0000:42: resource 1 [mem 0x82600000-0x826fffff] [ 0.974702] pci_bus 0000:43: resource 1 [mem 0x82500000-0x825fffff] [ 0.974703] pci_bus 0000:44: resource 1 [mem 0x82400000-0x824fffff] [ 0.974704] pci_bus 0000:45: resource 1 [mem 0x82000000-0x822fffff] [ 0.974704] pci_bus 0000:46: resource 1 [mem 0x82300000-0x823fffff] [ 0.974740] NET: Registered protocol family 2 [ 0.974969] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.974975] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.975004] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.975053] TCP: Hash tables configured (established 32768 bind 32768) [ 0.975075] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.975083] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.975118] NET: Registered protocol family 1 [ 0.975123] NET: Registered protocol family 44 [ 0.975214] xen: registering gsi 24 triggering 0 polarity 1 [ 0.975234] xen: --> pirq=24 -> irq=24 (gsi=24) [ 0.975313] pci 0000:08:00.0: PME# does not work under D0, disabling it [ 0.975334] xen: registering gsi 26 triggering 0 polarity 1 [ 0.975341] xen: --> pirq=26 -> irq=26 (gsi=26) [ 0.975366] xen: registering gsi 25 triggering 0 polarity 1 [ 0.975372] xen: --> pirq=25 -> irq=25 (gsi=25) [ 0.975396] xen: registering gsi 25 triggering 0 polarity 1 [ 0.975397] Already setup the GSI :25 [ 0.975465] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.975474] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0 [ 0.975518] xen: registering gsi 44 triggering 0 polarity 1 [ 0.975526] xen: --> pirq=44 -> irq=44 (gsi=44) [ 0.975551] xen: registering gsi 37 triggering 0 polarity 1 [ 0.975557] xen: --> pirq=37 -> irq=37 (gsi=37) [ 0.975924] xen: registering gsi 76 triggering 0 polarity 1 [ 0.975935] xen: --> pirq=76 -> irq=76 (gsi=76) [ 0.975959] xen: registering gsi 69 triggering 0 polarity 1 [ 0.975964] xen: --> pirq=69 -> irq=69 (gsi=69) [ 0.976248] PCI: CLS 64 bytes, default 64 [ 0.976281] Trying to unpack rootfs image as initramfs... [ 1.326852] Freeing initrd memory: 34576K [ 1.327956] Initialise system trusted keyrings [ 1.327964] Key type blacklist registered [ 1.328036] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.328836] zbud: loaded [ 1.329126] Platform Keyring initialized [ 1.331966] NET: Registered protocol family 38 [ 1.331970] Key type asymmetric registered [ 1.331971] Asymmetric key parser 'x509' registered [ 1.331976] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.332024] io scheduler mq-deadline registered [ 1.332025] io scheduler kyber registered [ 1.332040] io scheduler bfq registered [ 1.332174] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 1.332987] pcieport 0000:00:01.1: PME: Signaling with IRQ 146 [ 1.333078] pcieport 0000:00:01.1: AER: enabled with IRQ 146 [ 1.333130] pcieport 0000:00:01.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 1.333873] pcieport 0000:00:03.1: PME: Signaling with IRQ 147 [ 1.333945] pcieport 0000:00:03.1: AER: enabled with IRQ 147 [ 1.333999] pcieport 0000:00:03.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 1.334231] pcieport 0000:00:07.1: PME: Signaling with IRQ 148 [ 1.334299] pcieport 0000:00:07.1: AER: enabled with IRQ 148 [ 1.334915] xen: registering gsi 32 triggering 0 polarity 1 [ 1.334927] xen: --> pirq=32 -> irq=32 (gsi=32) [ 1.335102] pcieport 0000:00:08.1: PME: Signaling with IRQ 149 [ 1.335172] pcieport 0000:00:08.1: AER: enabled with IRQ 149 [ 1.335353] xen: registering gsi 24 triggering 0 polarity 1 [ 1.335354] Already setup the GSI :24 [ 1.335491] xen: registering gsi 25 triggering 0 polarity 1 [ 1.335492] Already setup the GSI :25 [ 1.335635] xen: registering gsi 26 triggering 0 polarity 1 [ 1.335636] Already setup the GSI :26 [ 1.335771] xen: registering gsi 27 triggering 0 polarity 1 [ 1.335777] xen: --> pirq=27 -> irq=27 (gsi=27) [ 1.335912] xen: registering gsi 24 triggering 0 polarity 1 [ 1.335913] Already setup the GSI :24 [ 1.336156] xen: registering gsi 54 triggering 0 polarity 1 [ 1.336162] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.336296] xen: registering gsi 54 triggering 0 polarity 1 [ 1.336298] Already setup the GSI :54 [ 1.336854] pcieport 0000:40:01.1: PME: Signaling with IRQ 159 [ 1.336922] pcieport 0000:40:01.1: AER: enabled with IRQ 159 [ 1.336972] pcieport 0000:40:01.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 1.337201] pcieport 0000:40:01.2: PME: Signaling with IRQ 160 [ 1.337263] pcieport 0000:40:01.2: AER: enabled with IRQ 160 [ 1.337315] pcieport 0000:40:01.2: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 1.337908] pcieport 0000:40:03.1: PME: Signaling with IRQ 161 [ 1.337973] pcieport 0000:40:03.1: AER: enabled with IRQ 161 [ 1.338022] pcieport 0000:40:03.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 1.338253] pcieport 0000:40:03.2: PME: Signaling with IRQ 162 [ 1.338320] pcieport 0000:40:03.2: AER: enabled with IRQ 162 [ 1.338369] pcieport 0000:40:03.2: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 1.338898] pcieport 0000:40:07.1: PME: Signaling with IRQ 163 [ 1.338965] pcieport 0000:40:07.1: AER: enabled with IRQ 163 [ 1.339055] xen: registering gsi 64 triggering 0 polarity 1 [ 1.339064] xen: --> pirq=64 -> irq=64 (gsi=64) [ 1.339229] pcieport 0000:40:08.1: PME: Signaling with IRQ 164 [ 1.339293] pcieport 0000:40:08.1: AER: enabled with IRQ 164 [ 1.339901] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.339916] ACPI: Power Button [PWRB] [ 1.339941] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.339971] ACPI: Power Button [PWRF] [ 1.340788] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.361692] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.363157] hpet_acpi_add: no address or irqs in _CRS [ 1.363222] Non-volatile memory driver v1.3 [ 1.363251] Linux agpgart interface v0.103 [ 1.364675] ahci 0000:01:00.1: version 3.0 [ 1.364701] xen: registering gsi 25 triggering 0 polarity 1 [ 1.364703] Already setup the GSI :25 [ 1.364781] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 1.364833] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 1.364835] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.365345] scsi host0: ahci [ 1.365463] scsi host1: ahci [ 1.365564] scsi host2: ahci [ 1.365685] scsi host3: ahci [ 1.365786] scsi host4: ahci [ 1.365860] scsi host5: ahci [ 1.365956] scsi host6: ahci [ 1.366053] scsi host7: ahci [ 1.366080] ata1: SATA max UDMA/133 abar m131072@0xd9c80000 port 0xd9c80100 irq 166 [ 1.366082] ata2: SATA max UDMA/133 abar m131072@0xd9c80000 port 0xd9c80180 irq 166 [ 1.366083] ata3: SATA max UDMA/133 abar m131072@0xd9c80000 port 0xd9c80200 irq 166 [ 1.366085] ata4: SATA max UDMA/133 abar m131072@0xd9c80000 port 0xd9c80280 irq 166 [ 1.366086] ata5: SATA max UDMA/133 abar m131072@0xd9c80000 port 0xd9c80300 irq 166 [ 1.366088] ata6: SATA max UDMA/133 abar m131072@0xd9c80000 port 0xd9c80380 irq 166 [ 1.366089] ata7: SATA max UDMA/133 abar m131072@0xd9c80000 port 0xd9c80400 irq 166 [ 1.366091] ata8: SATA max UDMA/133 abar m131072@0xd9c80000 port 0xd9c80480 irq 166 [ 1.366188] xen: registering gsi 42 triggering 0 polarity 1 [ 1.366208] xen: --> pirq=42 -> irq=42 (gsi=42) [ 1.366303] ahci 0000:0d:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.366305] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.366465] scsi host8: ahci [ 1.366491] ata9: SATA max UDMA/133 abar m4096@0xd9f08000 port 0xd9f08100 irq 167 [ 1.366545] xen: registering gsi 74 triggering 0 polarity 1 [ 1.366555] xen: --> pirq=74 -> irq=74 (gsi=74) [ 1.366619] ahci 0000:46:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.366622] ahci 0000:46:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.366765] scsi host9: ahci [ 1.366789] ata10: SATA max UDMA/133 abar m4096@0x82300000 port 0x82300100 irq 168 [ 1.366868] libphy: Fixed MDIO Bus: probed [ 1.366954] usbcore: registered new interface driver usbserial_generic [ 1.366957] usbserial: USB Serial support registered for generic [ 1.366971] i8042: PNP: No PS/2 controller found. [ 1.366998] mousedev: PS/2 mouse device common for all mice [ 1.367079] rtc_cmos 00:02: RTC can wake from S4 [ 1.367172] rtc_cmos 00:02: registered as rtc0 [ 1.367173] rtc_cmos 00:02: no alarms, y3k, 114 bytes nvram [ 1.367212] device-mapper: uevent: version 1.0.3 [ 1.367251] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 1.367705] hidraw: raw HID events driver (C) Jiri Kosina [ 1.367724] usbcore: registered new interface driver usbhid [ 1.367725] usbhid: USB HID core driver [ 1.367827] drop_monitor: Initializing network drop monitor service [ 1.367869] Initializing XFRM netlink socket [ 1.367941] NET: Registered protocol family 10 [ 1.370705] Segment Routing with IPv6 [ 1.370717] mip6: Mobile IPv6 [ 1.370718] NET: Registered protocol family 17 [ 1.371102] RAS: Correctable Errors collector initialized. [ 1.371108] IPI shorthand broadcast: enabled [ 1.371112] AVX2 version of gcm_enc/dec engaged. [ 1.371113] AES CTR mode by8 optimization enabled [ 1.386146] sched_clock: Marking stable (1366573443, 19566966)->(1684222119, -298081710) [ 1.386297] registered taskstats version 1 [ 1.386304] Loading compiled-in X.509 certificates [ 1.406943] Loaded X.509 cert 'Build time autogenerated kernel key: faf898d6412c6b3aa1995fc5928d8cfaf261d7c7' [ 1.406962] zswap: loaded using pool lzo/zbud [ 1.407084] Key type ._fscrypt registered [ 1.407084] Key type .fscrypt registered [ 1.411884] Key type big_key registered [ 1.414175] Key type encrypted registered [ 1.414182] ima: No TPM chip found, activating TPM-bypass! [ 1.414189] ima: Allocated hash algorithm: sha256 [ 1.414194] ima: No architecture policies found [ 1.414510] PM: Magic number: 13:441:676 [ 1.414693] rtc_cmos 00:02: setting system clock to 2021-03-05T09:41:28 UTC (1614937288) [ 1.674640] ata10: SATA link down (SStatus 0 SControl 300) [ 1.675640] ata9: SATA link down (SStatus 0 SControl 300) [ 1.836638] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.837294] ata1.00: NCQ Send/Recv Log not supported [ 1.837296] ata1.00: ATA-9: SAMSUNG MZ7WD480HCGM-00003, DXM9203Q, max UDMA/133 [ 1.837296] ata1.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.837600] ata1.00: NCQ Send/Recv Log not supported [ 1.837656] ata1.00: configured for UDMA/133 [ 1.837754] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7WD480 203Q PQ: 0 ANSI: 5 [ 1.837871] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.837885] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 1.837892] sd 0:0:0:0: [sda] Write Protect is off [ 1.837893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.837903] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.838270] sda: sda1 sda2 [ 1.838574] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.300638] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.301421] ata2.00: ATA-9: MKNSSDE3480GB, O1126A, max UDMA/133 [ 2.301422] ata2.00: 937703088 sectors, multi 2: LBA48 NCQ (depth 32), AA [ 2.301585] ata2.00: configured for UDMA/133 [ 2.301667] scsi 1:0:0:0: Direct-Access ATA MKNSSDE3480GB 6A PQ: 0 ANSI: 5 [ 2.301765] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.301864] sd 1:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.301883] sd 1:0:0:0: [sdb] Write Protect is off [ 2.301885] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.301918] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.303688] sdb: sdb1 sdb2 sdb3 sdb4 [ 2.304029] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.332630] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a91dc9111, max_idle_ns: 440795393621 ns [ 2.332660] clocksource: Switched to clocksource tsc [ 2.609759] ata3: SATA link down (SStatus 0 SControl 300) [ 2.913758] ata4: SATA link down (SStatus 0 SControl 300) [ 3.217754] ata5: SATA link down (SStatus 0 SControl 300) [ 3.521763] ata6: SATA link down (SStatus 0 SControl 300) [ 3.825760] ata7: SATA link down (SStatus 0 SControl 330) [ 4.860627] ata8: failed to resume link (SControl 0) [ 4.860637] ata8: SATA link down (SStatus 0 SControl 0) [ 4.862262] Freeing unused decrypted memory: 2040K [ 4.862947] Freeing unused kernel image memory: 3016K [ 4.862949] Write protecting the kernel read-only data: 22528k [ 4.867810] Freeing unused kernel image memory: 2036K [ 4.868194] Freeing unused kernel image memory: 1640K [ 4.868200] rodata_test: all tests were successful [ 4.868203] Run /init as init process [ 4.881677] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.881727] systemd[1]: Detected virtualization vm-other. [ 4.881731] systemd[1]: Detected architecture x86-64. [ 4.881733] systemd[1]: Running in initial RAM disk. [ 4.881747] systemd[1]: Set hostname to . [ 4.927459] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.927522] systemd[1]: Listening on Journal Socket. [ 4.927553] systemd[1]: Listening on udev Control Socket. [ 4.927598] systemd[1]: Listening on Journal Audit Socket. [ 4.927893] systemd[1]: Created slice System Slice. [ 4.934755] xen:xen_evtchn: Event-channel device installed [ 4.938782] audit: type=1130 audit(1614937292.022:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.940549] audit: type=1130 audit(1614937292.023:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.940653] xen_pciback: backend is vpci [ 4.942404] audit: type=1130 audit(1614937292.025:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.947804] audit: type=1130 audit(1614937292.031:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.968960] audit: type=1130 audit(1614937292.052:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.993339] pciback 0000:05:00.0: seizing device [ 4.993452] xen: registering gsi 26 triggering 0 polarity 1 [ 4.993458] Already setup the GSI :26 [ 5.004264] audit: type=1130 audit(1614937292.087:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 5.183180] audit: type=1130 audit(1614937292.266:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 5.188129] audit: type=1130 audit(1614937292.271:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 5.266921] audit: type=1130 audit(1614937292.350:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 5.291522] xen: registering gsi 36 triggering 0 polarity 1 [ 5.291542] xen: --> pirq=36 -> irq=36 (gsi=36) [ 5.293675] xen: registering gsi 24 triggering 0 polarity 1 [ 5.293683] Already setup the GSI :24 [ 5.293738] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.293804] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 5.299055] ccp 0000:0c:00.2: ccp enabled [ 5.299155] xen: registering gsi 68 triggering 0 polarity 1 [ 5.299175] xen: --> pirq=68 -> irq=68 (gsi=68) [ 5.299934] nvme nvme0: pci function 0000:41:00.0 [ 5.299982] xen: registering gsi 56 triggering 0 polarity 1 [ 5.299993] xen: --> pirq=56 -> irq=56 (gsi=56) [ 5.300007] nvme nvme1: pci function 0000:42:00.0 [ 5.300075] xen: registering gsi 60 triggering 0 polarity 1 [ 5.300081] nvme nvme2: pci function 0000:43:00.0 [ 5.300103] xen: --> pirq=60 -> irq=60 (gsi=60) [ 5.300134] nvme nvme3: pci function 0000:44:00.0 [ 5.300216] xen: registering gsi 86 triggering 0 polarity 1 [ 5.300229] xen: --> pirq=86 -> irq=86 (gsi=86) [ 5.300248] xen: registering gsi 68 triggering 0 polarity 1 [ 5.300250] Already setup the GSI :68 [ 5.306025] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 5.306027] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 5.307930] ccp 0000:45:00.2: ccp enabled [ 5.349266] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000410 [ 5.349473] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 5.349474] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.349475] usb usb1: Product: xHCI Host Controller [ 5.349476] usb usb1: Manufacturer: Linux 5.4.98-1.fc25.qubes.x86_64 xhci-hcd [ 5.349477] usb usb1: SerialNumber: 0000:01:00.0 [ 5.349637] hub 1-0:1.0: USB hub found [ 5.349655] hub 1-0:1.0: 14 ports detected [ 5.351233] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.351271] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 5.351273] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 5.351301] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.351322] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 5.351323] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.351323] usb usb2: Product: xHCI Host Controller [ 5.351324] usb usb2: Manufacturer: Linux 5.4.98-1.fc25.qubes.x86_64 xhci-hcd [ 5.351325] usb usb2: SerialNumber: 0000:01:00.0 [ 5.351388] hub 2-0:1.0: USB hub found [ 5.351400] hub 2-0:1.0: 8 ports detected [ 5.352395] xen: registering gsi 25 triggering 0 polarity 1 [ 5.352401] Already setup the GSI :25 [ 5.352434] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 5.352470] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3 [ 5.377471] [drm] amdgpu kernel modesetting enabled. [ 5.377605] Parsing CRAT table with 2 nodes [ 5.377608] Ignoring ACPI CRAT on non-APU system [ 5.377610] Virtual CRAT table created for CPU [ 5.377611] Parsing CRAT table with 1 nodes [ 5.377611] Creating topology SYSFS entries [ 5.377633] Topology: Add CPU node [ 5.377634] Finished initializing topology [ 5.377934] amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xc0000000 -> 0xcfffffff [ 5.377936] amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xd0000000 -> 0xd01fffff [ 5.377937] amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xd9d00000 -> 0xd9d7ffff [ 5.377938] amdgpu 0000:0b:00.0: vgaarb: deactivate vga console [ 5.378683] Console: switching to colour dummy device 80x25 [ 5.378782] xen: registering gsi 54 triggering 0 polarity 1 [ 5.378789] Already setup the GSI :54 [ 5.378946] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1002:0x6B76 0xC1). [ 5.379004] [drm] register mmio base: 0xD9D00000 [ 5.379005] [drm] register mmio size: 524288 [ 5.379030] [drm] add ip block number 0 [ 5.379032] [drm] add ip block number 1 [ 5.379033] [drm] add ip block number 2 [ 5.379033] [drm] add ip block number 3 [ 5.379035] [drm] add ip block number 4 [ 5.379036] [drm] add ip block number 5 [ 5.379037] [drm] add ip block number 6 [ 5.379037] [drm] add ip block number 7 [ 5.379038] [drm] add ip block number 8 [ 5.379039] [drm] add ip block number 9 [ 5.379087] amdgpu 0000:0b:00.0: No more image in the PCI ROM [ 5.381062] ATOM BIOS: 113-D0501400-101 [ 5.381100] [drm] UVD(0) is enabled in VM mode [ 5.381100] [drm] UVD(0) ENC is enabled in VM mode [ 5.381100] [drm] VCE enabled in VM mode [ 5.381124] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 5.381137] amdgpu 0000:0b:00.0: BAR 2: releasing [mem 0xd0000000-0xd01fffff 64bit pref] [ 5.381138] amdgpu 0000:0b:00.0: BAR 0: releasing [mem 0xc0000000-0xcfffffff 64bit pref] [ 5.381155] pcieport 0000:0a:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref] [ 5.381156] pcieport 0000:09:00.0: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref] [ 5.381157] pcieport 0000:00:03.1: BAR 15: releasing [mem 0xc0000000-0xd01fffff 64bit pref] [ 5.381164] pcieport 0000:00:03.1: BAR 15: assigned [mem 0x900000000-0xbffffffff 64bit pref] [ 5.381165] pcieport 0000:09:00.0: BAR 15: assigned [mem 0x900000000-0xbffffffff 64bit pref] [ 5.381166] pcieport 0000:0a:00.0: BAR 15: assigned [mem 0x900000000-0xbffffffff 64bit pref] [ 5.381168] amdgpu 0000:0b:00.0: BAR 0: assigned [mem 0xa00000000-0xbffffffff 64bit pref] [ 5.381180] amdgpu 0000:0b:00.0: BAR 2: assigned [mem 0x900000000-0x9001fffff 64bit pref] [ 5.381192] pcieport 0000:00:03.1: PCI bridge to [bus 09-0b] [ 5.381194] pcieport 0000:00:03.1: bridge window [io 0x1000-0x1fff] [ 5.381198] pcieport 0000:00:03.1: bridge window [mem 0xd9d00000-0xd9efffff] [ 5.381202] pcieport 0000:00:03.1: bridge window [mem 0x900000000-0xbffffffff 64bit pref] [ 5.381207] pcieport 0000:09:00.0: PCI bridge to [bus 0a-0b] [ 5.381209] pcieport 0000:09:00.0: bridge window [io 0x1000-0x1fff] [ 5.381214] pcieport 0000:09:00.0: bridge window [mem 0xd9d00000-0xd9dfffff] [ 5.381217] pcieport 0000:09:00.0: bridge window [mem 0x900000000-0xbffffffff 64bit pref] [ 5.381224] pcieport 0000:0a:00.0: PCI bridge to [bus 0b] [ 5.381226] pcieport 0000:0a:00.0: bridge window [io 0x1000-0x1fff] [ 5.381231] pcieport 0000:0a:00.0: bridge window [mem 0xd9d00000-0xd9dfffff] [ 5.381234] pcieport 0000:0a:00.0: bridge window [mem 0x900000000-0xbffffffff 64bit pref] [ 5.381249] amdgpu 0000:0b:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used) [ 5.381250] amdgpu 0000:0b:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 5.381251] amdgpu 0000:0b:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 5.381253] [drm] Detected VRAM RAM=8176M, BAR=8192M [ 5.381254] [drm] RAM width 2048bits HBM [ 5.381320] [TTM] Zone kernel: Available graphics memory: 1991482 KiB [ 5.381323] [TTM] Initializing pool allocator [ 5.381326] [TTM] Initializing DMA pool allocator [ 5.407424] xhci_hcd 0000:08:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010 [ 5.407939] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 5.407940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.407941] usb usb3: Product: xHCI Host Controller [ 5.407942] usb usb3: Manufacturer: Linux 5.4.98-1.fc25.qubes.x86_64 xhci-hcd [ 5.407943] usb usb3: SerialNumber: 0000:08:00.0 [ 5.408045] hub 3-0:1.0: USB hub found [ 5.408053] hub 3-0:1.0: 2 ports detected [ 5.408204] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 5.408238] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4 [ 5.408240] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 5.408270] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.408293] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 5.408293] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.408294] usb usb4: Product: xHCI Host Controller [ 5.408295] usb usb4: Manufacturer: Linux 5.4.98-1.fc25.qubes.x86_64 xhci-hcd [ 5.408295] usb usb4: SerialNumber: 0000:08:00.0 [ 5.408368] hub 4-0:1.0: USB hub found [ 5.408376] hub 4-0:1.0: 2 ports detected [ 5.408532] xen: registering gsi 37 triggering 0 polarity 1 [ 5.408536] Already setup the GSI :37 [ 5.408658] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 5.408783] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 5 [ 5.408875] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410 [ 5.409018] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 5.409019] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.409020] usb usb5: Product: xHCI Host Controller [ 5.409021] usb usb5: Manufacturer: Linux 5.4.98-1.fc25.qubes.x86_64 xhci-hcd [ 5.409021] usb usb5: SerialNumber: 0000:0c:00.3 [ 5.409112] hub 5-0:1.0: USB hub found [ 5.409120] hub 5-0:1.0: 4 ports detected [ 5.409298] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 5.409328] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 6 [ 5.409329] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed [ 5.409343] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.409369] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 5.409370] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.409370] usb usb6: Product: xHCI Host Controller [ 5.409371] usb usb6: Manufacturer: Linux 5.4.98-1.fc25.qubes.x86_64 xhci-hcd [ 5.409372] usb usb6: SerialNumber: 0000:0c:00.3 [ 5.409452] hub 6-0:1.0: USB hub found [ 5.409459] hub 6-0:1.0: 4 ports detected [ 5.409658] xen: registering gsi 69 triggering 0 polarity 1 [ 5.409660] Already setup the GSI :69 [ 5.409776] xhci_hcd 0000:45:00.3: xHCI Host Controller [ 5.409814] xhci_hcd 0000:45:00.3: new USB bus registered, assigned bus number 7 [ 5.409906] xhci_hcd 0000:45:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410 [ 5.410030] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 5.410031] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.410031] usb usb7: Product: xHCI Host Controller [ 5.410032] usb usb7: Manufacturer: Linux 5.4.98-1.fc25.qubes.x86_64 xhci-hcd [ 5.410032] usb usb7: SerialNumber: 0000:45:00.3 [ 5.410110] hub 7-0:1.0: USB hub found [ 5.410117] hub 7-0:1.0: 4 ports detected [ 5.410304] xhci_hcd 0000:45:00.3: xHCI Host Controller [ 5.410334] xhci_hcd 0000:45:00.3: new USB bus registered, assigned bus number 8 [ 5.410338] xhci_hcd 0000:45:00.3: Host supports USB 3.0 SuperSpeed [ 5.410353] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.410374] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 5.410375] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.410376] usb usb8: Product: xHCI Host Controller [ 5.410376] usb usb8: Manufacturer: Linux 5.4.98-1.fc25.qubes.x86_64 xhci-hcd [ 5.410377] usb usb8: SerialNumber: 0000:45:00.3 [ 5.410447] hub 8-0:1.0: USB hub found [ 5.410454] hub 8-0:1.0: 4 ports detected [ 5.508881] nvme nvme3: missing or invalid SUBNQN field. [ 5.508883] nvme nvme2: missing or invalid SUBNQN field. [ 5.511089] nvme nvme2: 8/0/0 default/read/poll queues [ 5.511132] nvme nvme3: 8/0/0 default/read/poll queues [ 5.511917] nvme3n1: p1 p2 p3 p4 [ 5.512032] nvme2n1: p1 p2 p3 p4 < p5 > [ 5.516520] nvme nvme0: 8/0/0 default/read/poll queues [ 5.522574] nvme0n1: p1 p2 [ 5.732630] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 5.734628] usb 5-4: new full-speed USB device number 2 using xhci_hcd [ 5.774843] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 5.870087] usb 8-1: New USB device found, idVendor=0bb4, idProduct=0210, bcdDevice=90.33 [ 5.870089] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.870090] usb 8-1: Product: CB USB3 [ 5.870091] usb 8-1: Manufacturer: HTC [ 5.885342] usb 5-4: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 0.90 [ 5.885343] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.885344] usb 5-4: Product: Back-UPS RS 1500G FW:865.L3 .D USB FW:L3 [ 5.885345] usb 5-4: Manufacturer: American Power Conversion [ 5.885345] usb 5-4: SerialNumber: 3B1249X09572 [ 5.890484] hub 8-1:1.0: USB hub found [ 5.890837] hub 8-1:1.0: 1 port detected [ 5.951312] usb 1-5: New USB device found, idVendor=13fe, idProduct=3100, bcdDevice= 1.00 [ 5.951314] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.951315] usb 1-5: Product: MKNUFDMH8GB [ 5.951315] usb 1-5: Manufacturer: MUSHKIN [ 5.951316] usb 1-5: SerialNumber: 07AB05071F6FC59E [ 5.959655] usb-storage 1-5:1.0: USB Mass Storage device detected [ 5.959799] scsi host10: usb-storage 1-5:1.0 [ 5.959860] usbcore: registered new interface driver usb-storage [ 5.960837] usbcore: registered new interface driver uas [ 5.981628] usb 7-1: new high-speed USB device number 2 using xhci_hcd [ 6.011599] hid-generic 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS RS 1500G FW:865.L3 .D USB FW:L3 ] on usb-0000:0c:00.3-4/input0 [ 6.015399] [drm] amdgpu: 8176M of VRAM memory ready [ 6.015408] [drm] amdgpu: 2917M of GTT memory ready. [ 6.015420] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.015535] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [ 6.017227] [drm] use_doorbell being set to: [true] [ 6.017733] [drm] use_doorbell being set to: [true] [ 6.017840] amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu [ 6.017991] [drm] Found UVD firmware Version: 65.29 Family ID: 17 [ 6.017993] [drm] PSP loading UVD firmware [ 6.018474] [drm] Found VCE firmware Version: 57.4 Binary ID: 4 [ 6.018478] [drm] PSP loading VCE firmware [ 6.041475] usb 2-6: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 6.063307] usb 2-6: New USB device found, idVendor=1058, idProduct=25da, bcdDevice=30.02 [ 6.063308] usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 6.063309] usb 2-6: Product: My Book 25DA [ 6.063310] usb 2-6: Manufacturer: Western Digital [ 6.063311] usb 2-6: SerialNumber: 32454B584C4E5050 [ 6.069094] usb-storage 2-6:1.0: USB Mass Storage device detected [ 6.069219] scsi host11: usb-storage 2-6:1.0 [ 6.207247] [drm] reserve 0x400000 from 0xf5fe800000 for PSP TMR [ 6.232625] usb 1-12: new low-speed USB device number 3 using xhci_hcd [ 6.260814] usb 7-1: New USB device found, idVendor=0bb4, idProduct=2210, bcdDevice=90.30 [ 6.260816] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.260817] usb 7-1: Product: CB USB2 [ 6.260817] usb 7-1: Manufacturer: HTC [ 6.281558] [drm] Display Core initialized with v3.2.48! [ 6.306458] hub 7-1:1.0: USB hub found [ 6.306812] hub 7-1:1.0: 4 ports detected [ 6.430254] usb 8-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 6.442486] [drm] SADs count is: -2, don't need to read it [ 6.458680] usb 8-1.1: New USB device found, idVendor=2109, idProduct=0210, bcdDevice=63.11 [ 6.458682] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.458682] usb 8-1.1: Product: USB3.1 Hub [ 6.458683] usb 8-1.1: Manufacturer: GenesysLogic [ 6.458684] usb 8-1.1: SerialNumber: d709e2daca72cb4d9d4e0d3a90f38d04 [ 6.466484] [drm] SADs count is: -2, don't need to read it [ 6.466536] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.466537] [drm] Driver supports precise vblank timestamp query. [ 6.484189] hub 8-1.1:1.0: USB hub found [ 6.485926] hub 8-1.1:1.0: 1 port detected [ 6.487857] [drm] UVD and UVD ENC initialized successfully. [ 6.533197] usb 1-12: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.07 [ 6.533199] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.533199] usb 1-12: Product: Dell USB Keyboard [ 6.533200] usb 1-12: Manufacturer: Dell [ 6.550120] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-12/1-12:1.0/0003:413C:2003.0002/input/input2 [ 6.588248] [drm] VCE initialized successfully. [ 6.601749] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:01:00.0-12/input0 [ 6.632582] kfd kfd: Allocated 3969056 bytes on gart [ 6.632653] Virtual CRAT table created for GPU [ 6.632653] Parsing CRAT table with 1 nodes [ 6.632661] Creating topology SYSFS entries [ 6.632755] Topology: Add dGPU node [0x687f:0x1002] [ 6.632757] kfd kfd: added device 1002:687f [ 6.634623] [drm] fb mappable at 0xA00CEE000 [ 6.634624] [drm] vram apper at 0xA00000000 [ 6.634625] [drm] size 19906560 [ 6.634625] [drm] fb depth is 24 [ 6.634625] [drm] pitch is 13824 [ 6.634680] fbcon: amdgpudrmfb (fb0) is primary device [ 6.756790] Console: switching to colour frame buffer device 200x67 [ 6.770793] usb 8-1.1.1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 6.773921] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device [ 6.777630] usb 1-13: new full-speed USB device number 4 using xhci_hcd [ 6.784286] usb 8-1.1.1: LPM exit latency is zeroed, disabling LPM. [ 6.785038] usb 8-1.1.1: config 1 has an invalid interface number: 3 but max is 2 [ 6.785039] usb 8-1.1.1: config 1 has an invalid interface number: 4 but max is 2 [ 6.785040] usb 8-1.1.1: config 1 has no interface number 0 [ 6.785040] usb 8-1.1.1: config 1 has no interface number 1 [ 6.785701] amdgpu 0000:0b:00.0: ring gfx uses VM inv eng 0 on hub 0 [ 6.785703] amdgpu 0000:0b:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 6.785704] amdgpu 0000:0b:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 6.785705] amdgpu 0000:0b:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 6.785706] amdgpu 0000:0b:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 6.785706] amdgpu 0000:0b:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 6.785707] amdgpu 0000:0b:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 6.785708] amdgpu 0000:0b:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 6.785709] amdgpu 0000:0b:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 6.785709] amdgpu 0000:0b:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 6.785710] amdgpu 0000:0b:00.0: ring sdma0 uses VM inv eng 0 on hub 1 [ 6.785711] amdgpu 0000:0b:00.0: ring page0 uses VM inv eng 1 on hub 1 [ 6.785712] amdgpu 0000:0b:00.0: ring sdma1 uses VM inv eng 4 on hub 1 [ 6.785712] amdgpu 0000:0b:00.0: ring page1 uses VM inv eng 5 on hub 1 [ 6.785713] amdgpu 0000:0b:00.0: ring uvd_0 uses VM inv eng 6 on hub 1 [ 6.785714] amdgpu 0000:0b:00.0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1 [ 6.785715] amdgpu 0000:0b:00.0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1 [ 6.785716] amdgpu 0000:0b:00.0: ring vce0 uses VM inv eng 9 on hub 1 [ 6.785717] amdgpu 0000:0b:00.0: ring vce1 uses VM inv eng 10 on hub 1 [ 6.785718] amdgpu 0000:0b:00.0: ring vce2 uses VM inv eng 11 on hub 1 [ 6.785719] [drm] ECC is not present. [ 6.785720] [drm] SRAM ECC is not present. [ 6.786538] usb 8-1.1.1: New USB device found, idVendor=045e, idProduct=0659, bcdDevice= 0.05 [ 6.786539] usb 8-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.786540] usb 8-1.1.1: Product: HoloLens Sensors [ 6.786541] usb 8-1.1.1: Manufacturer: Microsoft [ 6.786541] usb 8-1.1.1: SerialNumber: e146fa9d-fd47-4b81-97cd-11745667db51 [ 6.789139] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:0b:00.0 on minor 0 [ 6.822990] hid-generic 0003:045E:0659.0003: hiddev97,hidraw2: USB HID v11.10 Device [Microsoft HoloLens Sensors] on usb-0000:45:00.3-1.1.1/input2 [ 6.859638] usb 7-1.1: new high-speed USB device number 3 using xhci_hcd [ 6.968278] usb 7-1.1: New USB device found, idVendor=2109, idProduct=2210, bcdDevice=63.11 [ 6.968280] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.968281] usb 7-1.1: Product: USB2.1 Hub [ 6.968281] usb 7-1.1: Manufacturer: GenesysLogic [ 6.968282] usb 7-1.1: SerialNumber: d709e2daca72cb4d9d4e0d3a90f38d04 [ 7.008774] scsi 10:0:0:0: Direct-Access MUSHKIN MKNUFDMH8GB PMAP PQ: 0 ANSI: 0 CCS [ 7.008934] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 7.009752] sd 10:0:0:0: [sdc] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 7.011176] hub 7-1.1:1.0: USB hub found [ 7.012178] sd 10:0:0:0: [sdc] Write Protect is off [ 7.012180] sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 7.013901] hub 7-1.1:1.0: 3 ports detected [ 7.014582] sd 10:0:0:0: [sdc] No Caching mode page found [ 7.014584] sd 10:0:0:0: [sdc] Assuming drive cache: write through [ 7.030649] sdc: sdc1 sdc2 [ 7.036114] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 7.096629] usb 7-1.2: new full-speed USB device number 4 using xhci_hcd [ 7.133886] scsi 11:0:0:0: Direct-Access WD My Book 25DA 3002 PQ: 0 ANSI: 6 [ 7.134117] scsi 11:0:0:1: Enclosure WD SES Device 3002 PQ: 0 ANSI: 6 [ 7.137130] sd 11:0:0:0: Attached scsi generic sg3 type 0 [ 7.137238] scsi 11:0:0:1: Attached scsi generic sg4 type 13 [ 7.137320] sd 11:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [ 7.137440] sd 11:0:0:0: [sdd] 15628052480 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 7.137441] sd 11:0:0:0: [sdd] 4096-byte physical blocks [ 7.138844] sd 11:0:0:0: [sdd] Write Protect is off [ 7.138846] sd 11:0:0:0: [sdd] Mode Sense: 53 00 10 08 [ 7.139722] sd 11:0:0:0: [sdd] No Caching mode page found [ 7.139724] sd 11:0:0:0: [sdd] Assuming drive cache: write through [ 7.147159] usb 1-13: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07 [ 7.147160] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.147161] usb 1-13: Product: USB Receiver [ 7.147162] usb 1-13: Manufacturer: Logitech [ 7.165095] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-13/1-13:1.0/0003:046D:C52B.0004/input/input3 [ 7.196891] usb 7-1.2: New USB device found, idVendor=0bb4, idProduct=0306, bcdDevice= 1.12 [ 7.196893] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.196893] usb 7-1.2: Product: BCM920703 Bluetooth 4.1 [ 7.196894] usb 7-1.2: Manufacturer: Broadcom Corp [ 7.196895] usb 7-1.2: SerialNumber: 404E36BE3E71 [ 7.216749] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-13/input0 [ 7.218991] sdd: sdd1 [ 7.221252] sd 11:0:0:0: [sdd] Attached SCSI disk [ 7.228210] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-13/1-13:1.1/0003:046D:C52B.0005/input/input4 [ 7.228292] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-13/1-13:1.1/0003:046D:C52B.0005/input/input5 [ 7.279678] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-13/1-13:1.1/0003:046D:C52B.0005/input/input6 [ 7.279766] hid-generic 0003:046D:C52B.0005: input,hiddev98,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-13/input1 [ 7.287175] hid-generic 0003:046D:C52B.0006: hiddev99,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-13/input2 [ 7.329633] usb 7-1.1.2: new high-speed USB device number 5 using xhci_hcd [ 7.377047] logitech-djreceiver 0003:046D:C52B.0006: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-13/input2 [ 7.485218] input: Logitech Unifying Device. Wireless PID:101b Mouse as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0006/0003:046D:101B.0007/input/input8 [ 7.485401] hid-generic 0003:046D:101B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:01:00.0-13/input2:1 [ 7.497005] input: Logitech MK700 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0006/0003:046D:2008.0008/input/input12 [ 7.503752] logitech-hidpp-device 0003:046D:2008.0008: input,hidraw4: USB HID v1.11 Keyboard [Logitech MK700] on usb-0000:01:00.0-13/input2:2 [ 7.516951] input: Logitech M705 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0006/0003:046D:101B.0007/input/input13 [ 7.517052] logitech-hidpp-device 0003:046D:101B.0007: input,hidraw5: USB HID v1.11 Mouse [Logitech M705] on usb-0000:01:00.0-13/input2:1 [ 7.627244] usb 7-1.1.2: New USB device found, idVendor=04e8, idProduct=7084, bcdDevice= 0.05 [ 7.627246] usb 7-1.1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 7.627247] usb 7-1.1.2: Product: USB Audio [ 7.627248] usb 7-1.1.2: Manufacturer: Generic [ 7.627249] usb 7-1.1.2: SerialNumber: 201405280001 [ 7.721074] input: Generic USB Audio Consumer Control as /devices/pci0000:40/0000:40:07.1/0000:45:00.3/usb7/7-1/7-1.1/7-1.1.2/7-1.1.2:1.3/0003:04E8:7084.0009/input/input14 [ 7.772681] input: Generic USB Audio as /devices/pci0000:40/0000:40:07.1/0000:45:00.3/usb7/7-1/7-1.1/7-1.1.2/7-1.1.2:1.3/0003:04E8:7084.0009/input/input15 [ 7.772776] hid-generic 0003:04E8:7084.0009: input,hiddev99,hidraw6: USB HID v1.11 Device [Generic USB Audio] on usb-0000:45:00.3-1.1.2/input3 [ 7.865626] usb 7-1.1.3: new full-speed USB device number 6 using xhci_hcd [ 7.974851] usb 7-1.1.3: New USB device found, idVendor=04e8, idProduct=7312, bcdDevice= 2.00 [ 7.974853] usb 7-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.974854] usb 7-1.1.3: Product: XE700X3AI [ 7.974854] usb 7-1.1.3: Manufacturer: STMicroelectronics [ 7.974855] usb 7-1.1.3: SerialNumber: 00000000001A [ 8.069660] input: STMicroelectronics XE700X3AI as /devices/pci0000:40/0000:40:07.1/0000:45:00.3/usb7/7-1/7-1.1/7-1.1.3/7-1.1.3:1.0/0003:04E8:7312.000A/input/input16 [ 8.121678] input: STMicroelectronics XE700X3AI Consumer Control as /devices/pci0000:40/0000:40:07.1/0000:45:00.3/usb7/7-1/7-1.1/7-1.1.3/7-1.1.3:1.0/0003:04E8:7312.000A/input/input17 [ 8.121775] hid-generic 0003:04E8:7312.000A: input,hiddev100,hidraw7: USB HID v1.11 Device [STMicroelectronics XE700X3AI] on usb-0000:45:00.3-1.1.3/input0 [ 9.669538] nvme nvme1: 8/0/0 default/read/poll queues [ 9.671341] nvme1n1: p1 [ 9.693380] kauditd_printk_skb: 1 callbacks suppressed [ 9.693381] audit: type=1130 audit(1614937296.776:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 12.793291] logitech-hidpp-device 0003:046D:2008.0008: HID++ 1.0 device connected. [ 16.927415] audit: type=1130 audit(1614937304.010:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-cryptsetup@luks\x2df8334f95\x2d4733\x2d449a\x2db1b0\x2daa88fd165525 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.410858] audit: type=1130 audit(1614937304.494:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.436170] audit: type=1130 audit(1614937304.519:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.447248] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 17.529823] audit: type=1130 audit(1614937304.613:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.529833] audit: type=1131 audit(1614937304.613:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.535895] audit: type=1130 audit(1614937304.619:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.535907] audit: type=1131 audit(1614937304.619:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.537593] audit: type=1130 audit(1614937304.620:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.537603] audit: type=1131 audit(1614937304.620:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.538051] audit: type=1130 audit(1614937304.621:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 17.578194] systemd-journald[282]: Received SIGTERM from PID 1 (systemd). [ 17.600182] printk: systemd: 21 output lines suppressed due to ratelimiting [ 17.649929] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time. [ 17.754713] EXT4-fs (dm-4): re-mounted. Opts: discard [ 17.769763] xen_acpi_processor: Uploading Xen processor PM info [ 17.770585] xen_acpi_processor: (CX): Hypervisor error (-14) for ACPI CPU1 [ 17.770587] xen_acpi_processor: (CX): Hypervisor error (-14) for ACPI CPU3 [ 17.770589] xen_acpi_processor: (CX): Hypervisor error (-14) for ACPI CPU5 [ 17.770591] xen_acpi_processor: (CX): Hypervisor error (-14) for ACPI CPU7 [ 17.770593] xen_acpi_processor: (CX): Hypervisor error (-14) for ACPI CPU9 [ 17.770594] xen_acpi_processor: (CX): Hypervisor error (-14) for ACPI CPU11 [ 17.770596] xen_acpi_processor: (CX): Hypervisor error (-14) for ACPI CPU13 [ 17.770597] xen_acpi_processor: (CX): Hypervisor error (-14) for ACPI CPU15 [ 17.772535] systemd-journald[856]: Received request to flush runtime journal from PID 1 [ 17.891827] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [ 18.172568] scsi 11:0:0:1: Failed to get diagnostic page 0x1 [ 18.172571] scsi 11:0:0:1: Failed to bind enclosure -19 [ 18.172588] ses 11:0:0:1: Attached Enclosure device [ 18.201176] dca service started, version 1.12.1 [ 18.237930] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 18.237932] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 18.237991] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 18.240419] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 18.240506] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 18.240516] sp5100-tco sp5100-tco: Watchdog hardware is disabled [ 18.240576] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 18.240577] igb: Copyright (c) 2007-2014 Intel Corporation. [ 18.346421] xen: registering gsi 55 triggering 0 polarity 1 [ 18.346451] xen: --> pirq=55 -> irq=55 (gsi=55) [ 18.346470] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client [ 18.347211] xen: registering gsi 43 triggering 0 polarity 1 [ 18.347231] xen: --> pirq=43 -> irq=43 (gsi=43) [ 18.370997] snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 18.378200] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 18.378202] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.378204] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 18.378205] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 18.378205] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 18.378206] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 18.378208] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 18.378209] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 18.378210] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 18.378869] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input19 [ 18.378920] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input20 [ 18.378958] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input21 [ 18.378993] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input22 [ 18.379026] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input23 [ 18.379063] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input24 [ 18.403360] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input25 [ 18.403512] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input26 [ 18.403819] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input27 [ 18.403877] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input28 [ 18.403938] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input29 [ 18.403994] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input30 [ 18.404053] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input31 [ 18.496909] input: PC Speaker as /devices/platform/pcspkr/input/input32 [ 18.525291] MCE: In-kernel MCE decoding enabled. [ 18.527145] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.527146] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.527158] EDAC amd64: Node 1: DRAM ECC disabled. [ 18.527159] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.544283] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.544285] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.544295] EDAC amd64: Node 1: DRAM ECC disabled. [ 18.544296] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.558852] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.558853] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.558865] EDAC amd64: Node 1: DRAM ECC disabled. [ 18.558866] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.574553] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.574555] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.574565] EDAC amd64: Node 1: DRAM ECC disabled. [ 18.574565] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.578663] mc: Linux media interface: v0.10 [ 18.591676] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.591679] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.591694] EDAC amd64: Node 1: DRAM ECC disabled. [ 18.591695] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.612375] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.612377] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.612395] EDAC amd64: Node 1: DRAM ECC disabled. [ 18.612397] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.617774] Bluetooth: Core ver 2.22 [ 18.617795] NET: Registered protocol family 31 [ 18.617795] Bluetooth: HCI device and connection manager initialized [ 18.618864] Bluetooth: HCI socket layer initialized [ 18.618867] Bluetooth: L2CAP socket layer initialized [ 18.618873] Bluetooth: SCO socket layer initialized [ 18.631560] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.631561] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.631573] EDAC amd64: Node 1: DRAM ECC disabled. [ 18.631574] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.635919] raid6: using algorithm avx2x4 gen() 0 MB/s [ 18.635920] raid6: .... xor() 0 MB/s, rmw enabled [ 18.635921] raid6: using avx2x2 recovery algorithm [ 18.641323] xor: automatically using best checksumming function avx [ 18.663788] EDAC amd64: Node 0: DRAM ECC disabled. [ 18.663789] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.663806] EDAC amd64: Node 1: DRAM ECC disabled. [ 18.663807] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.677722] Btrfs loaded, crc32c=crc32c-intel [ 18.679965] BTRFS: device fsid 41014dd2-4506-4986-b83b-4de7a1a99e32 devid 1 transid 32617 /dev/nvme3n1p4 [ 18.720439] usbcore: registered new interface driver btusb [ 18.838938] Bluetooth: hci0: BCM: chip id 102 [ 18.839929] Bluetooth: hci0: BCM: features 0x2f [ 18.855940] Bluetooth: hci0: thrdwks.rprvnet.tk #2 [ 18.856928] Bluetooth: hci0: BCM20703A1 (001.001.005) build 0481 [ 18.860423] bluetooth hci0: Direct firmware load for brcm/BCM20703A1-0bb4-0306.hcd failed with error -2 [ 18.860426] Bluetooth: hci0: BCM: Patch brcm/BCM20703A1-0bb4-0306.hcd not found [ 19.112631] Adding 16117756k swap on /dev/mapper/qubes_dom0-swap. Priority:-2 extents:1 across:16117756k SSFS [ 19.373953] usbcore: registered new interface driver snd-usb-audio [ 19.560183] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 21.884457] loop: module loaded [ 22.059074] xen_pciback: vpci: 0000:05:00.0: assign to virtual slot 0 [ 22.059285] pciback 0000:05:00.0: registering for 1 [ 22.075338] kauditd_printk_skb: 70 callbacks suppressed [ 22.075339] audit: type=1103 audit(1614955309.159:93): pid=6542 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 22.076185] audit: type=1105 audit(1614955309.160:94): pid=6542 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 22.083123] audit: type=1106 audit(1614955309.167:95): pid=6542 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 22.083146] audit: type=1104 audit(1614955309.167:96): pid=6542 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 22.096596] audit: type=1103 audit(1614955309.180:97): pid=6545 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 22.096866] audit: type=1105 audit(1614955309.181:98): pid=6545 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 22.806283] xen-blkback: backend/vbd/1/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 22.818991] xen-blkback: backend/vbd/1/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 22.829732] xen-blkback: backend/vbd/1/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 22.837440] xen-blkback: backend/vbd/1/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 23.871070] audit: type=1131 audit(1614955310.955:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.948323] xen: registering gsi 26 triggering 0 polarity 1 [ 23.948330] Already setup the GSI :26 [ 23.948537] xen: registering gsi 26 triggering 0 polarity 1 [ 23.948538] Already setup the GSI :26 [ 23.948709] xen: registering gsi 26 triggering 0 polarity 1 [ 23.948711] Already setup the GSI :26 [ 23.948861] xen: registering gsi 26 triggering 0 polarity 1 [ 23.948863] Already setup the GSI :26 [ 23.949005] xen: registering gsi 26 triggering 0 polarity 1 [ 23.949006] Already setup the GSI :26 [ 23.949165] xen: registering gsi 26 triggering 0 polarity 1 [ 23.949166] Already setup the GSI :26 [ 23.949307] xen: registering gsi 26 triggering 0 polarity 1 [ 23.949308] Already setup the GSI :26 [ 23.949440] xen: registering gsi 26 triggering 0 polarity 1 [ 23.949441] Already setup the GSI :26 [ 23.949827] pciback 0000:05:00.0: Driver tried to write to a read-only configuration space field at offset 0x72, size 2. This may be harmless, but if you have problems with your device: 1) see permissive attribute in sysfs 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci. [ 24.102963] pciback 0000:05:00.0: xen map irq failed -19 for 1 domain [ 24.102969] xen_pciback: 0000:05:00.0: error enabling MSI-X for guest 1: err -19! [ 24.103120] pciback 0000:05:00.0: xen map irq failed -19 for 1 domain [ 24.103121] xen_pciback: 0000:05:00.0: error enabling MSI for guest 1: err -19 [ 24.223650] audit: type=1106 audit(1614955311.308:100): pid=6545 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 24.223669] audit: type=1104 audit(1614955311.308:101): pid=6545 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 24.241150] audit: type=1130 audit(1614955311.325:102): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qubes-vm@sys-net comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 26.500785] xen-blkback: backend/vbd/2/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 26.516675] xen-blkback: backend/vbd/2/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 26.529612] xen-blkback: backend/vbd/2/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 26.538871] xen-blkback: backend/vbd/2/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 27.967663] kauditd_printk_skb: 6 callbacks suppressed [ 27.967665] audit: type=1106 audit(1614955315.052:109): pid=6858 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 27.967688] audit: type=1104 audit(1614955315.052:110): pid=6858 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 27.986286] audit: type=1130 audit(1614955315.070:111): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qubes-vm@sys-firewall comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 29.401068] audit: type=1103 audit(1614955316.485:112): pid=7167 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 29.401308] audit: type=1105 audit(1614955316.485:113): pid=7167 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 29.412550] audit: type=1106 audit(1614955316.496:114): pid=7167 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 29.412554] audit: type=1104 audit(1614955316.496:115): pid=7167 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 29.427260] audit: type=1103 audit(1614955316.511:116): pid=7170 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 29.427517] audit: type=1105 audit(1614955316.511:117): pid=7170 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 30.578406] xen-blkback: backend/vbd/3/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 30.593716] xen-blkback: backend/vbd/3/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 30.609069] xen-blkback: backend/vbd/3/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 30.622912] xen-blkback: backend/vbd/3/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 36.880450] audit: type=1106 audit(1614955323.964:118): pid=7170 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 36.880483] audit: type=1104 audit(1614955323.964:119): pid=7170 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 36.896138] audit: type=1130 audit(1614955323.980:120): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=qubes-vm@sys-whonix comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 36.901612] audit: type=1130 audit(1614955323.985:121): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 36.904274] audit: type=1130 audit(1614955323.988:122): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=crond comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 36.946925] audit: type=1130 audit(1614955324.031:123): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 37.040180] audit: type=1130 audit(1614955324.124:124): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 37.041163] audit: type=1130 audit(1614955324.125:125): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 37.678107] audit: type=1130 audit(1614955324.762:126): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-quit-wait comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 37.678110] audit: type=1131 audit(1614955324.762:127): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-quit-wait comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 48.254024] kauditd_printk_skb: 12 callbacks suppressed [ 48.254026] audit: type=1100 audit(1614955335.338:140): pid=7273 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_unix acct="riux" exe="/usr/sbin/lightdm" hostname=? addr=? terminal=:0 res=success' [ 48.254118] audit: type=1101 audit(1614955335.338:141): pid=7273 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_unix,pam_localuser acct="riux" exe="/usr/sbin/lightdm" hostname=? addr=? terminal=:0 res=success' [ 48.372007] audit: type=1106 audit(1614955335.456:142): pid=7231 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/sbin/lightdm" hostname=? addr=? terminal=:0 res=success' [ 48.372056] audit: type=1104 audit(1614955335.456:143): pid=7231 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/sbin/lightdm" hostname=? addr=? terminal=:0 res=success' [ 48.376263] audit: type=1103 audit(1614955335.460:144): pid=7273 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix acct="riux" exe="/usr/sbin/lightdm" hostname=? addr=? terminal=:0 res=success' [ 48.376307] audit: type=1006 audit(1614955335.460:145): pid=7273 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1 [ 48.390541] audit: type=1101 audit(1614955335.474:146): pid=7288 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_unix,pam_localuser acct="riux" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 48.390546] audit: type=1006 audit(1614955335.474:147): pid=7288 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1 [ 48.390549] audit: type=1105 audit(1614955335.474:148): pid=7288 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_selinux,pam_selinux,pam_loginuid,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="riux" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 48.397194] audit: type=1131 audit(1614955335.481:149): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@994 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 49.683981] logitech-hidpp-device 0003:046D:101B.0007: HID++ 1.0 device connected. [ 49.826515] usb 7-1.1.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x400, type = 0 [ 49.984241] usb 7-1.1.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x400, type = 0 [ 50.256874] usb 7-1.1.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x400, type = 0 [ 50.830816] usb 7-1.1.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x400, type = 0 [ 51.406896] usb 7-1.1.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x400, type = 0 [ 51.520895] usb 7-1.1.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x400, type = 0 [ 190.141468] kauditd_printk_skb: 4 callbacks suppressed [ 190.141469] audit: type=1103 audit(1614955477.225:154): pid=8596 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 190.141736] audit: type=1105 audit(1614955477.226:155): pid=8596 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 190.149486] audit: type=1106 audit(1614955477.233:156): pid=8596 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 190.149526] audit: type=1104 audit(1614955477.234:157): pid=8596 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 190.166146] audit: type=1103 audit(1614955477.250:158): pid=8599 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 190.166505] audit: type=1105 audit(1614955477.250:159): pid=8599 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 191.141923] xen-blkback: backend/vbd/4/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 191.155805] xen-blkback: backend/vbd/4/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 191.171701] xen-blkback: backend/vbd/4/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 191.180872] xen-blkback: backend/vbd/4/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 193.195393] audit: type=1106 audit(1614955480.279:160): pid=8599 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 193.195396] audit: type=1104 audit(1614955480.279:161): pid=8599 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 217.040173] xen-blkback: backend/vbd/6/51712: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 217.052325] xen-blkback: backend/vbd/6/51728: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 217.061752] xen-blkback: backend/vbd/6/51744: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 217.069221] xen-blkback: backend/vbd/6/51760: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 239.325073] xen_pciback: vpci: 0000:05:00.0: assign to virtual slot 0 [ 239.325516] pciback 0000:05:00.0: registering for 7 [ 239.338760] audit: type=1103 audit(1614955526.423:162): pid=10533 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 239.339019] audit: type=1105 audit(1614955526.423:163): pid=10533 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 239.345489] audit: type=1106 audit(1614955526.430:164): pid=10533 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 239.345510] audit: type=1104 audit(1614955526.430:165): pid=10533 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 239.359247] audit: type=1103 audit(1614955526.443:166): pid=10536 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 239.359528] audit: type=1105 audit(1614955526.444:167): pid=10536 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 240.015640] xen-blkback: backend/vbd/7/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 240.029389] xen-blkback: backend/vbd/7/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 240.040691] xen-blkback: backend/vbd/7/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 240.048553] xen-blkback: backend/vbd/7/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 241.199446] xen: registering gsi 26 triggering 0 polarity 1 [ 241.199452] Already setup the GSI :26 [ 241.199673] xen: registering gsi 26 triggering 0 polarity 1 [ 241.199675] Already setup the GSI :26 [ 241.199886] xen: registering gsi 26 triggering 0 polarity 1 [ 241.199887] Already setup the GSI :26 [ 241.200017] xen: registering gsi 26 triggering 0 polarity 1 [ 241.200018] Already setup the GSI :26 [ 241.200141] xen: registering gsi 26 triggering 0 polarity 1 [ 241.200142] Already setup the GSI :26 [ 241.200276] xen: registering gsi 26 triggering 0 polarity 1 [ 241.200277] Already setup the GSI :26 [ 241.200454] xen: registering gsi 26 triggering 0 polarity 1 [ 241.200455] Already setup the GSI :26 [ 241.200581] xen: registering gsi 26 triggering 0 polarity 1 [ 241.200582] Already setup the GSI :26 [ 241.344398] pciback 0000:05:00.0: xen map irq failed -19 for 7 domain [ 241.344405] xen_pciback: 0000:05:00.0: error enabling MSI-X for guest 7: err -19! [ 241.344570] pciback 0000:05:00.0: xen map irq failed -19 for 7 domain [ 241.344571] xen_pciback: 0000:05:00.0: error enabling MSI for guest 7: err -19 [ 241.559515] audit: type=1106 audit(1614955528.644:168): pid=10536 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 241.559518] audit: type=1104 audit(1614955528.644:169): pid=10536 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 247.280031] audit: type=1103 audit(1614955534.364:170): pid=10869 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 247.280296] audit: type=1105 audit(1614955534.364:171): pid=10869 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 247.287680] audit: type=1106 audit(1614955534.372:172): pid=10869 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 247.287723] audit: type=1104 audit(1614955534.372:173): pid=10869 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 247.306077] audit: type=1103 audit(1614955534.390:174): pid=10872 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 247.306335] audit: type=1105 audit(1614955534.390:175): pid=10872 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 248.406198] xen-blkback: backend/vbd/8/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 248.418920] xen-blkback: backend/vbd/8/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 248.432799] xen-blkback: backend/vbd/8/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 248.446223] xen-blkback: backend/vbd/8/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 250.495942] audit: type=1106 audit(1614955537.580:176): pid=10872 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 250.495964] audit: type=1104 audit(1614955537.580:177): pid=10872 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 308.345385] audit: type=1103 audit(1614955595.429:178): pid=10920 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 308.345650] audit: type=1105 audit(1614955595.430:179): pid=10920 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 308.354523] audit: type=1103 audit(1614955595.439:180): pid=10922 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 308.354795] audit: type=1105 audit(1614955595.439:181): pid=10922 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 308.560884] audit: type=1106 audit(1614955595.645:182): pid=10922 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 308.560910] audit: type=1104 audit(1614955595.645:183): pid=10922 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 308.584224] audit: type=1106 audit(1614955595.668:184): pid=10920 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 308.584246] audit: type=1104 audit(1614955595.668:185): pid=10920 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 310.030367] audit: type=1103 audit(1614955597.114:186): pid=11224 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 310.030652] audit: type=1105 audit(1614955597.115:187): pid=11224 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 311.093301] xen-blkback: backend/vbd/9/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 311.109055] xen-blkback: backend/vbd/9/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 311.124907] xen-blkback: backend/vbd/9/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 311.140318] xen-blkback: backend/vbd/9/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 314.212445] kauditd_printk_skb: 4 callbacks suppressed [ 314.212446] audit: type=1106 audit(1614955601.297:192): pid=11227 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 314.212449] audit: type=1104 audit(1614955601.297:193): pid=11227 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 356.701448] usb 7-1.1.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x400, type = 0 [ 908.794826] audit: type=1130 audit(1614956195.879:194): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 908.794829] audit: type=1131 audit(1614956195.879:195): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1115.607362] audit: type=1111 audit(1614956401.498:196): pid=11358 uid=0 auid=4294967295 ses=4294967295 msg='op=change-system-time exe="/usr/sbin/hwclock" hostname=? addr=? terminal=? res=success' [ 1206.125013] audit: type=1103 audit(1614956492.016:197): pid=11384 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1206.125437] audit: type=1105 audit(1614956492.016:198): pid=11384 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1206.134873] audit: type=1103 audit(1614956492.026:199): pid=11386 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1206.135121] audit: type=1105 audit(1614956492.026:200): pid=11386 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1206.340908] audit: type=1106 audit(1614956492.232:201): pid=11386 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1206.340925] audit: type=1104 audit(1614956492.232:202): pid=11386 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1206.375640] audit: type=1106 audit(1614956492.266:203): pid=11384 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1206.375658] audit: type=1104 audit(1614956492.266:204): pid=11384 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1207.849392] audit: type=1103 audit(1614956493.740:205): pid=11692 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1207.849658] audit: type=1105 audit(1614956493.740:206): pid=11692 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1208.896812] xen-blkback: backend/vbd/10/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 1208.913408] xen-blkback: backend/vbd/10/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 1208.933691] xen-blkback: backend/vbd/10/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 1208.949529] xen-blkback: backend/vbd/10/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 1211.435649] kauditd_printk_skb: 4 callbacks suppressed [ 1211.435650] audit: type=1106 audit(1614956497.326:211): pid=11695 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1211.435667] audit: type=1104 audit(1614956497.326:212): pid=11695 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 1313.539476] audit: type=1123 audit(1614956599.430:213): pid=11756 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd="qubes-dom0-update" terminal=pts/0 res=success' [ 1313.539571] audit: type=1110 audit(1614956599.430:214): pid=11756 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1313.540893] audit: type=1105 audit(1614956599.432:215): pid=11756 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1347.001951] audit: type=1106 audit(1614956632.893:216): pid=11756 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1347.002002] audit: type=1104 audit(1614956632.893:217): pid=11756 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1422.439108] audit: type=1123 audit(1614956708.330:218): pid=11800 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd="dmesg" terminal=pts/0 res=success' [ 1422.439223] audit: type=1110 audit(1614956708.330:219): pid=11800 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1422.440563] audit: type=1105 audit(1614956708.332:220): pid=11800 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1422.449879] audit: type=1106 audit(1614956708.341:221): pid=11800 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1422.449926] audit: type=1104 audit(1614956708.341:222): pid=11800 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1430.485811] audit: type=1123 audit(1614956716.377:223): pid=11809 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd="dmesg" terminal=pts/0 res=success' [ 1430.485910] audit: type=1110 audit(1614956716.377:224): pid=11809 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1430.487174] audit: type=1105 audit(1614956716.378:225): pid=11809 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1465.681093] audit: type=1106 audit(1614956751.572:226): pid=11809 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1465.681151] audit: type=1104 audit(1614956751.572:227): pid=11809 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1577.568383] audit: type=1123 audit(1614956863.459:228): pid=11837 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd="dmesg" terminal=pts/0 res=success' [ 1577.568489] audit: type=1110 audit(1614956863.460:229): pid=11837 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1577.569747] audit: type=1105 audit(1614956863.461:230): pid=11837 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1577.578996] audit: type=1106 audit(1614956863.470:231): pid=11837 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1577.579052] audit: type=1104 audit(1614956863.470:232): pid=11837 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1746.525899] audit: type=1123 audit(1614957032.417:233): pid=11862 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=71756265732D646F6D302D757064617465202D2D656E61626C657265706F3D71756265732D646F6D302D63757272656E742D74657374696E67 terminal=pts/0 res=success' [ 1746.526002] audit: type=1110 audit(1614957032.417:234): pid=11862 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1746.527321] audit: type=1105 audit(1614957032.419:235): pid=11862 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1752.068277] audit: type=1106 audit(1614957037.959:236): pid=11862 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1752.068332] audit: type=1104 audit(1614957037.960:237): pid=11862 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1975.803283] audit: type=1123 audit(1614957261.695:238): pid=11909 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=71756265732D646F6D302D757064617465206C697374 terminal=pts/0 res=success' [ 1975.803390] audit: type=1110 audit(1614957261.695:239): pid=11909 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1975.804646] audit: type=1105 audit(1614957261.696:240): pid=11909 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1979.074236] audit: type=1106 audit(1614957264.966:241): pid=11909 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1979.074288] audit: type=1104 audit(1614957264.966:242): pid=11909 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1981.785836] audit: type=1123 audit(1614957267.677:243): pid=11937 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=71756265732D646F6D302D7570646174652068656C70 terminal=pts/0 res=success' [ 1981.785939] audit: type=1110 audit(1614957267.677:244): pid=11937 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1981.787170] audit: type=1105 audit(1614957267.679:245): pid=11937 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1984.957664] audit: type=1106 audit(1614957270.849:246): pid=11937 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1984.957719] audit: type=1104 audit(1614957270.849:247): pid=11937 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1994.289039] audit: type=1123 audit(1614957280.180:248): pid=11965 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=71756265732D646F6D302D7570646174652071756265732D74656D706C6174652D6665646F72612D3333 terminal=pts/0 res=success' [ 1994.289151] audit: type=1110 audit(1614957280.181:249): pid=11965 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 1994.290362] audit: type=1105 audit(1614957280.182:250): pid=11965 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success' [ 2059.518108] irq 26: nobody cared (try booting with the "irqpoll" option) [ 2059.518112] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.98-1.fc25.qubes.x86_64 #1 [ 2059.518113] Hardware name: System manufacturer System Product Name/PRIME X399-A, BIOS 1203 10/09/2019 [ 2059.518114] Call Trace: [ 2059.518116] [ 2059.518121] dump_stack+0x66/0x81 [ 2059.518123] __report_bad_irq+0x30/0xc0 [ 2059.518125] note_interrupt+0x232/0x270 [ 2059.518126] handle_irq_event_percpu+0x51/0x70 [ 2059.518127] handle_irq_event+0x36/0x60 [ 2059.518128] handle_fasteoi_irq+0x83/0x130 [ 2059.518129] generic_handle_irq+0x24/0x30 [ 2059.518131] __evtchn_fifo_handle_events+0x14c/0x1b0 [ 2059.518133] __xen_evtchn_do_upcall+0x70/0xd0 [ 2059.518135] xen_evtchn_do_upcall+0x27/0x40 [ 2059.518136] xen_do_hypervisor_callback+0x29/0x40 [ 2059.518137] [ 2059.518139] RIP: e030:xen_hypercall_sched_op+0xa/0x20 [ 2059.518141] Code: 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 2059.518141] RSP: e02b:ffffffff82603e48 EFLAGS: 00000246 [ 2059.518143] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff810013aa [ 2059.518143] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 [ 2059.518144] RBP: 0000000000000000 R08: 0000000008d8bb22 R09: 00000000000001c0 [ 2059.518144] R10: ffffc900117dbc78 R11: 0000000000000246 R12: ffffffff82614780 [ 2059.518145] R13: ffffffff82614780 R14: 0000000000000000 R15: 0000000000000000 [ 2059.518146] ? xen_hypercall_sched_op+0xa/0x20 [ 2059.518148] ? xen_safe_halt+0xc/0x20 [ 2059.518149] ? default_idle+0x1c/0x140 [ 2059.518150] ? do_idle+0x1bd/0x270 [ 2059.518151] ? do_idle+0xd/0x270 [ 2059.518152] ? cpu_startup_entry+0x19/0x20 [ 2059.518154] ? start_kernel+0x7d7/0x819 [ 2059.518156] ? iommu_shutdown_noop+0x10/0x10 [ 2059.518157] ? xen_start_kernel+0x82f/0x85b [ 2059.518158] handlers: [ 2059.518162] [<000000007bf2d7cf>] xen_pcibk_guest_interrupt [xen_pciback] [ 2059.518162] Disabling IRQ #26 [ 2113.919887] snd_hda_intel 0000:0d:00.3: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 2114.714819] audit: type=1123 audit(1614957400.606:251): pid=12022 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=786C20646D657367 terminal=pts/5 res=success' [ 2114.714954] audit: type=1110 audit(1614957400.606:252): pid=12022 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2114.716435] audit: type=1105 audit(1614957400.608:253): pid=12022 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2114.721844] audit: type=1106 audit(1614957400.613:254): pid=12022 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2114.721887] audit: type=1104 audit(1614957400.613:255): pid=12022 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2125.106391] audit: type=1123 audit(1614957410.998:256): pid=12031 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=786C20646D657367 terminal=pts/5 res=success' [ 2125.106495] audit: type=1110 audit(1614957410.998:257): pid=12031 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2125.107759] audit: type=1105 audit(1614957410.999:258): pid=12031 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2125.112830] audit: type=1106 audit(1614957411.004:259): pid=12031 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2125.112883] audit: type=1104 audit(1614957411.004:260): pid=12031 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2130.317306] audit: type=1123 audit(1614957416.209:261): pid=12040 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=786C20646D657367 terminal=pts/5 res=success' [ 2130.317417] audit: type=1110 audit(1614957416.209:262): pid=12040 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2130.318647] audit: type=1105 audit(1614957416.210:263): pid=12040 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2130.324043] audit: type=1106 audit(1614957416.216:264): pid=12040 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2130.324101] audit: type=1104 audit(1614957416.216:265): pid=12040 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2171.702444] audit: type=1123 audit(1614957457.594:266): pid=12051 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd="dmesg" terminal=pts/5 res=success' [ 2171.702554] audit: type=1110 audit(1614957457.594:267): pid=12051 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2171.704152] audit: type=1105 audit(1614957457.596:268): pid=12051 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2171.714318] audit: type=1106 audit(1614957457.606:269): pid=12051 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2171.714411] audit: type=1104 audit(1614957457.606:270): pid=12051 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2228.119936] audit: type=1123 audit(1614957514.011:271): pid=12092 uid=1000 auid=4294967295 ses=4294967295 msg='cwd="/run/qubes" cmd=2F7573722F62696E2F79756D202D7120636C65616E20616C6C terminal=? res=success' [ 2228.120036] audit: type=1110 audit(1614957514.012:272): pid=12092 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success' [ 2228.128649] audit: type=1101 audit(1614957514.020:273): pid=12093 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_unix,pam_localuser acct="root" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2228.128694] audit: type=1006 audit(1614957514.020:274): pid=12093 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=4 res=1 [ 2228.129146] audit: type=1105 audit(1614957514.021:275): pid=12093 uid=0 auid=0 ses=4 msg='op=PAM:session_open grantors=pam_selinux,pam_selinux,pam_loginuid,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2228.164517] audit: type=1130 audit(1614957514.056:276): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2228.165064] audit: type=1105 audit(1614957514.056:277): pid=12092 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_limits,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success' [ 2228.302367] audit: type=1106 audit(1614957514.194:278): pid=12092 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_limits,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success' [ 2228.302433] audit: type=1104 audit(1614957514.194:279): pid=12092 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=? res=success' [ 2228.313544] audit: type=1131 audit(1614957514.205:280): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2375.290509] pcieport 0000:40:01.2: AER: Corrected error received: 0000:00:00.0 [ 2375.290515] pcieport 0000:40:01.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 2375.290516] pcieport 0000:40:01.2: AER: device [1022:1453] error status/mask=00000080/00006000 [ 2375.290517] pcieport 0000:40:01.2: AER: [ 7] BadDLLP [ 2728.937923] audit: type=1123 audit(1614958014.830:281): pid=12194 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd="dmesg" terminal=pts/5 res=success' [ 2728.938029] audit: type=1110 audit(1614958014.830:282): pid=12194 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2728.939337] audit: type=1105 audit(1614958014.831:283): pid=12194 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2728.949217] audit: type=1106 audit(1614958014.841:284): pid=12194 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2728.949269] audit: type=1104 audit(1614958014.841:285): pid=12194 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2734.857867] audit: type=1123 audit(1614958020.750:286): pid=12203 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=786C20646D657367 terminal=pts/5 res=success' [ 2734.857966] audit: type=1110 audit(1614958020.750:287): pid=12203 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2734.859209] audit: type=1105 audit(1614958020.751:288): pid=12203 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2734.865074] audit: type=1106 audit(1614958020.757:289): pid=12203 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2734.865133] audit: type=1104 audit(1614958020.757:290): pid=12203 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 2924.726763] xen-blkback: backend/vbd/12/51712: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 2924.747106] xen-blkback: backend/vbd/12/51728: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 2924.773411] xen-blkback: backend/vbd/12/51744: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 2924.788270] xen-blkback: backend/vbd/12/51760: using 1 queues, protocol 1 (x86_64-abi) persistent grants [ 2925.334561] audit: type=1103 audit(1614958211.227:291): pid=12562 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 2925.334844] audit: type=1105 audit(1614958211.227:292): pid=12562 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 2925.343073] audit: type=1106 audit(1614958211.235:293): pid=12562 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 2925.343091] audit: type=1104 audit(1614958211.235:294): pid=12562 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 2925.358437] audit: type=1103 audit(1614958211.250:295): pid=12565 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 2925.358728] audit: type=1105 audit(1614958211.251:296): pid=12565 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 2931.358637] xen-blkback: backend/vbd/11/51712: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 2931.377506] xen-blkback: backend/vbd/11/51728: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 2931.400740] xen-blkback: backend/vbd/11/51744: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 2931.418296] xen-blkback: backend/vbd/11/51760: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 2934.925868] audit: type=1106 audit(1614958220.818:297): pid=12565 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_unix acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 2934.925893] audit: type=1104 audit(1614958220.818:298): pid=12565 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_rootok acct="riux" exe="/usr/sbin/runuser" hostname=? addr=? terminal=? res=success' [ 3671.945219] audit: type=1123 audit(1614958957.838:299): pid=12675 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd=646E6620696E7374616C6C2068746F70 terminal=pts/5 res=success' [ 3671.945321] audit: type=1110 audit(1614958957.838:300): pid=12675 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 3671.946710] audit: type=1105 audit(1614958957.839:301): pid=12675 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 3672.112343] audit: type=1106 audit(1614958958.005:302): pid=12675 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 3672.112394] audit: type=1104 audit(1614958958.005:303): pid=12675 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 3946.728205] audit: type=1123 audit(1614959232.621:304): pid=12720 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd="dmesg" terminal=pts/5 res=success' [ 3946.728319] audit: type=1110 audit(1614959232.621:305): pid=12720 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 3946.729712] audit: type=1105 audit(1614959232.623:306): pid=12720 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 3946.763697] audit: type=1106 audit(1614959232.657:307): pid=12720 uid=0 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 3946.763770] audit: type=1104 audit(1614959232.657:308): pid=12720 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 4031.382000] audit: type=1130 audit(1614959317.275:309): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4031.594820] audit: type=1130 audit(1614959317.488:310): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4039.728418] audit: type=1123 audit(1614959325.621:311): pid=12770 uid=1000 auid=1000 ses=2 msg='cwd="/home/riux" cmd="dmesg" terminal=pts/5 res=success' [ 4039.728786] audit: type=1110 audit(1614959325.622:312): pid=12770 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_env,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' [ 4039.730066] audit: type=1105 audit(1614959325.623:313): pid=12770 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/5 res=success' ```

Solutions you've tried

I changed sys-net and sys-firewall to PV as mentionned in an other thread, added amd_iommu=on in grub and rebooted. I upgraded to testing :

sudo qubes-dom0-update --enablerepo=qubes-dom0-current-testing 

xl dmesg | grep AMD

(XEN) AMD-Vi : Error initialization

sudo dmesg | grep AMD

[    5.306025] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    5.306027] AMD-Vi: AMD IOMMUv2 functionality not available on this system

Relevant documentation you've consulted

Related, non-duplicate issues

marmarek commented 3 years ago

This looks like a different issue. See the difference in error message:

(XEN) IVHD Error: no information for IO-APIC 0x82

vs previous issue:

(XEN) IVHD Error: IO-APIC 0x81 entry beyond bounds

It is likely that this time it is a BIOS/UEFI issue not including proper information in ACPI tables. Given the number of "Firmware Bug" log entries from Linux, it's even more likely. You can try:

johnr14 commented 3 years ago

Hi, thanks for your quick response !

I checked again: on latest bios->check enable all virtualization in bios->check reset bios to default and restart config->check and... wtf it works ???

I do not get the iommu message on installation. but I still get : [ 0.771640] Spectre V2 : Mitigation: Full AMD retpoline [ 6.034747] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel jroedel@suse.de [ 6.034748] AMD-Vi: AMD IOMMUv2 functionality not available on this system ... [ 0.959270] iommu: Default domain type: Translated and still lots of firmware bug...

sudo dmesg| grep -i bug ``` [ 0.771624] [Firmware Bug]: cpu 0, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.771625] mce: [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.771629] [Firmware Bug]: cpu 0, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.771631] mce: [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.771633] [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 1, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 1, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 1, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 1, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 1, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 2, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 2, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 2, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 2, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 2, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 3, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 3, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 3, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 3, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 3, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 4, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 4, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 4, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 4, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 4, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 5, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 5, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 5, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 5, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 5, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 6, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 6, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 6, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 6, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 6, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 7, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 7, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 7, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 7, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 7, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 8, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 8, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 8, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 8, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 8, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 9, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 9, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 9, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 9, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 9, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 10, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 10, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 10, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 10, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 10, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 11, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 11, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 11, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 11, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 11, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 12, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 12, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 12, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 12, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 12, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 13, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 13, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 13, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 13, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 13, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 14, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 14, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 14, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 14, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 14, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.021220] [Firmware Bug]: cpu 15, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 15, failed to setup threshold interrupt for bank 0, block 0 (MSRC0002003=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 15, try to use APIC510 (LVT offset 1) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 0.021220] mce: [Firmware Bug]: cpu 15, failed to setup threshold interrupt for bank 1, block 0 (MSRC0002013=0xd010000000000000) [ 0.021220] [Firmware Bug]: cpu 15, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu [ 0.919492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.355907] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.355975] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356044] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356098] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356141] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356286] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356331] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356374] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356424] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356521] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356570] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356616] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356669] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356722] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356774] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 1.356827] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) ```

But sys-net booted HMV on first try !

Will try current kernel-latest : kernel-latest-5.10.8-1.qubes.x86_64.rpm to see if mce bugs where addressed by 5.5 like mentioned here. But I need to reboot and closing this issue at the same time.

Guess it's one more of those bios faulting junk. I haven't had time to check GPU passthrough or sys-usb (as my keyboard/mice is usb) but for now it seems working. I am thinking hard about a Power9 system, if only I'd have that much to spare...

Thanks I will try it as my main driver for a while and post feedback on mailing list.

marmarek commented 3 years ago

[ 6.034748] AMD-Vi: AMD IOMMUv2 functionality not available on this system

This is expected inside VM (either dom0 or sys-net) - IOMMU is managed by Xen not Linux. You should see successful IOMMU initialization in xl dmesg output.