EV11 Hardware issues - Githubissues

[x] Some labels are impossible to read
[x] Most of the connector labels have gnd and 3.3v reversed.
[x] Battery connector pwr and gnd pins are backwards.
[x] Screen's extra connector is ramming into the connector on the board. So either we need to flip the screen the other way, or need to move the connector on the board. (probably move the board connector since the screen's connector will ram into the antenna.)
[x] The case's screen bezel is too high on the bottom of the screen and too low on the top of the screen.
[x] Rename "UI_BOOT" to "UI_BOOT0"
[x] Need auto reset circuit for esp32 -> https://preview.redd.it/esp32-auto-reset-circuit-mystery-v0-0qqsa3sm2zpc1.png?width=500&format=png&auto=webp&s=1da27f6f924708bd3dba6e2499d76bbb3d1d272c

Quicr / hactar