Open baira1044 opened 5 months ago
beegee-tokyo
commented
5 months ago The bootloader has nothing to do with the OLED display. If you are using a RAK4631, you can simply update the bootloader with the UF2 file following this guide ==> https://github.com/RAKWireless/WisBlock/tree/master/bootloader/RAK4630#update-over-uf2-drive
If you want to extend the P2P code with an OLED display you have to write it by yourself. Examples for both are available, you need to combine them.
baira1044
commented
5 months ago I know the oled has nothing to do with that, I was just asking two questions really. But thanks for the link!
On Mon, Mar 11, 2024, 9:43 PM Bernd Giesecke @.***> wrote:
The bootloader has nothing to do with the OLED display. If you are using a RAK4631, you can simply update the bootloader with the UF2 file following this guide ==> https://github.com/RAKWireless/WisBlock/tree/master/bootloader/RAK4630#update-over-uf2-drive
If you want to extend the P2P code with an OLED display you have to write it by yourself. Examples for both are available, you need to combine them.
— Reply to this email directly, view it on GitHub https://github.com/RAKWireless/WisBlock/issues/75#issuecomment-1989763057, or unsubscribe https://github.com/notifications/unsubscribe-auth/BG4EDIIARVD4RZSMMPNBFIDYXZMVXAVCNFSM6AAAAABERISB5SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBZG43DGMBVG4 . You are receiving this because you authored the thread.Message ID: @.***>
im trying to get into the rak wisblock for a p2p messenger but my bootloader is outdated and i cant find any that have an oled display. i bought the developer kit and a few oled displays off ebay but cant find any info on how to properly install them. any help would be greatly appreciated. i am novice to this but am very interested and i dont know how to code but have installed arduino trying to follow these tutorials but need help. dont bash me too hard!