Open GaramMasala opened 7 years ago
RF1000
commented
7 years ago Hello,
this version of the firmware must be compiled with Arduino V 1.6.5 (see https://github.com/RF1000/Repetier-Firmware/blob/master/README.md and https://github.com/RF1000/Repetier-Firmware/blob/development/README.md).
Best Regards, RF1000
GaramMasala
commented
7 years ago Hello!
Yes I know, but that readme does not state it must have that exact version. Why is it compiling fine with 1.0.6 then?
mhier
commented
7 years ago Obviously you don't need the exact version, I even managed to compile it with Arduino 1.8.2. Only it is not guaranteed to work with any other version than 1.6.5. The message is, if you have trouble you should try 1.6.5.
On the other hand, one should try to fix the problems preventing the compilation with versions newer than 1.6.5...
GaramMasala
commented
7 years ago "On the other hand, one should try to fix the problems preventing the compilation with versions newer than 1.6.5..."
Yes, that's how it should be.
Nibbels
commented
7 years ago Yes... "the community" fixed this ^^ but not this original firmware.
Have a look at mhiers and my branch. you can even compile this version with cmake on raspberry pi.
GaramMasala
commented
7 years ago Did find mhiers/branch profile but that was not much about repetier. Your profile/branch I did not find.
Nibbels
commented
7 years ago Well you should have! One click on my Icon and then to https://github.com/RF1000community/Repetier-Firmware
Hello!
Rf1.37 Do not build with arduino 1.6.12 But it does with arduino 1.0.6 Here is the build log from 1.6.12
Arduino: 1.6.12 (FreeBSD), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
/usr/local/arduino/arduino-builder -dump-prefs -logger=machine -hardware /usr/local/arduino/hardware -tools /usr/local/arduino/tools-builder -built-in-libraries /usr/local/arduino/libraries -libraries /usr/home/bernt/sketchbook/libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -ide-version=10612 -build-path /tmp/arduino_build_147243 -warnings=all -prefs=build.warn_data_percentage=75 -verbose /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino /usr/local/arduino/arduino-builder -compile -logger=machine -hardware /usr/local/arduino/hardware -tools /usr/local/arduino/tools-builder -built-in-libraries /usr/local/arduino/libraries -libraries /usr/home/bernt/sketchbook/libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -ide-version=10612 -build-path /tmp/arduino_build_147243 -warnings=all -prefs=build.warn_data_percentage=75 -verbose /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino Using board 'mega' from platform in folder: /usr/local/arduino/hardware/arduino/avr Using core 'arduino' from platform in folder: /usr/local/arduino/hardware/arduino/avr Detecting libraries used... "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "/tmp/arduino_build_147243/sketch/Repetier.ino.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "/tmp/arduino_build_147243/sketch/Repetier.ino.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Repetier.ino.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Commands.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Communication.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Eeprom.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Extruder.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/HAL.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Printer.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/RF.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/SDCard.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/SdFat.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/gcode.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/motion.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/ui.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src/SPI.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src/Wire.cpp" -o "/dev/null" "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src/utility/twi.c" -o "/dev/null" Generating function prototypes... "/usr/local/arduino/tools-builder/avr-gcc/4.9.2-atmel3.5.3-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR "-I/usr/local/arduino/hardware/arduino/avr/cores/arduino" "-I/usr/local/arduino/hardware/arduino/avr/variants/mega" "-I/usr/local/arduino/hardware/arduino/avr/libraries/SPI/src" "-I/usr/local/arduino/hardware/arduino/avr/libraries/Wire/src" "/tmp/arduino_build_147243/sketch/Repetier.ino.cpp" -o "/tmp/arduino_build_147243/preproc/ctags_target_for_gcc_minus_e.cpp" In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:114:27: fel: att sätta ihop "/ PINB.3, 22, MISO/" och "_DDR" ger inte en giltigt preprocessorsymbol
define MISO_PIN 50 // PINB.3, 22, MISO
/tmp/arduino_build_147243/sketch/fastio.h:49:38: anm: i definitionen av makrot "_SET_INPUT"
define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:643:9: anm: i expansionen av makrot "SET_INPUT" SET_INPUT(MISO_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:643:19: anm: i expansionen av makrot "MISO_PIN" SET_INPUT(MISO_PIN);
/tmp/arduino_build_147243/sketch/pins.h:114:27: fel: att sätta ihop "/ PINB.3, 22, MISO/" och "_PIN" ger inte en giltigt preprocessorsymbol
define MISO_PIN 50 // PINB.3, 22, MISO
/tmp/arduino_build_147243/sketch/fastio.h:49:65: anm: i definitionen av makrot "_SET_INPUT"
define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:643:9: anm: i expansionen av makrot "SET_INPUT" SET_INPUT(MISO_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:643:19: anm: i expansionen av makrot "MISO_PIN" SET_INPUT(MISO_PIN);
/tmp/arduino_build_147243/sketch/pins.h:115:27: fel: att sätta ihop "/ PINB.2, 21, MOSI/" och "_DDR" ger inte en giltigt preprocessorsymbol
define MOSI_PIN 51 // PINB.2, 21, MOSI
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:644:9: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(MOSI_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:644:20: anm: i expansionen av makrot "MOSI_PIN" SET_OUTPUT(MOSI_PIN);
/tmp/arduino_build_147243/sketch/pins.h:115:27: fel: att sätta ihop "/ PINB.2, 21, MOSI/" och "_PIN" ger inte en giltigt preprocessorsymbol
define MOSI_PIN 51 // PINB.2, 21, MOSI
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:644:9: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(MOSI_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:644:20: anm: i expansionen av makrot "MOSI_PIN" SET_OUTPUT(MOSI_PIN);
/tmp/arduino_build_147243/sketch/pins.h:113:27: fel: att sätta ihop "/ PINB.1, 20, SCK/" och "_DDR" ger inte en giltigt preprocessorsymbol
define SCK_PIN 52 // PINB.1, 20, SCK
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:645:9: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(SCK_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:645:20: anm: i expansionen av makrot "SCK_PIN" SET_OUTPUT(SCK_PIN);
/tmp/arduino_build_147243/sketch/pins.h:113:27: fel: att sätta ihop "/ PINB.1, 20, SCK/" och "_PIN" ger inte en giltigt preprocessorsymbol
define SCK_PIN 52 // PINB.1, 20, SCK
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:645:9: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(SCK_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:645:20: anm: i expansionen av makrot "SCK_PIN" SET_OUTPUT(SCK_PIN);
/tmp/arduino_build_147243/sketch/pins.h:82:24: fel: att sätta ihop "/ PINB.0, 19, SS/" och "_DDR" ger inte en giltigt preprocessorsymbol
define SDSS 53 // PINB.0, 19, SS
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:648:9: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(SDSS);
/tmp/arduino_build_147243/sketch/HAL.h:648:20: anm: i expansionen av makrot "SDSS" SET_OUTPUT(SDSS);
/tmp/arduino_build_147243/sketch/pins.h:82:24: fel: att sätta ihop "/ PINB.0, 19, SS/" och "_PIN" ger inte en giltigt preprocessorsymbol
define SDSS 53 // PINB.0, 19, SS
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:648:9: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(SDSS);
/tmp/arduino_build_147243/sketch/HAL.h:648:20: anm: i expansionen av makrot "SDSS" SET_OUTPUT(SDSS);
/tmp/arduino_build_147243/sketch/pins.h:115:27: fel: att sätta ihop "/ PINB.2, 21, MOSI/" och "_DDR" ger inte en giltigt preprocessorsymbol
define MOSI_PIN 51 // PINB.2, 21, MOSI
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:668:9: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(MOSI_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:668:20: anm: i expansionen av makrot "MOSI_PIN" SET_OUTPUT(MOSI_PIN);
/tmp/arduino_build_147243/sketch/pins.h:115:27: fel: att sätta ihop "/ PINB.2, 21, MOSI/" och "_PIN" ger inte en giltigt preprocessorsymbol
define MOSI_PIN 51 // PINB.2, 21, MOSI
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:668:9: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(MOSI_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:668:20: anm: i expansionen av makrot "MOSI_PIN" SET_OUTPUT(MOSI_PIN);
/tmp/arduino_build_147243/sketch/pins.h:114:27: fel: att sätta ihop "/ PINB.3, 22, MISO/" och "_DDR" ger inte en giltigt preprocessorsymbol
define MISO_PIN 50 // PINB.3, 22, MISO
/tmp/arduino_build_147243/sketch/fastio.h:49:38: anm: i definitionen av makrot "_SET_INPUT"
define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:669:9: anm: i expansionen av makrot "SET_INPUT" SET_INPUT(MISO_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:669:19: anm: i expansionen av makrot "MISO_PIN" SET_INPUT(MISO_PIN);
/tmp/arduino_build_147243/sketch/pins.h:114:27: fel: att sätta ihop "/ PINB.3, 22, MISO/" och "_PIN" ger inte en giltigt preprocessorsymbol
define MISO_PIN 50 // PINB.3, 22, MISO
/tmp/arduino_build_147243/sketch/fastio.h:49:65: anm: i definitionen av makrot "_SET_INPUT"
define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:669:9: anm: i expansionen av makrot "SET_INPUT" SET_INPUT(MISO_PIN);
/tmp/arduino_build_147243/sketch/HAL.h:669:19: anm: i expansionen av makrot "MISO_PIN" SET_INPUT(MISO_PIN);
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_DDR" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:52:39: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:761:3: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(WATCHDOG_PIN);
^ /tmp/arduino_build_147243/sketch/HAL.h:761:14: anm: i expansionen av makrot "WATCHDOG_PIN" SET_OUTPUT(WATCHDOG_PIN);
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_PIN" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:52:66: anm: i definitionen av makrot "_SET_OUTPUT"
define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:761:3: anm: i expansionen av makrot "SET_OUTPUT" SET_OUTPUT(WATCHDOG_PIN);
^ /tmp/arduino_build_147243/sketch/HAL.h:761:14: anm: i expansionen av makrot "WATCHDOG_PIN" SET_OUTPUT(WATCHDOG_PIN);
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_DDR" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:49:38: anm: i definitionen av makrot "_SET_INPUT"
define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:778:3: anm: i expansionen av makrot "SET_INPUT" SET_INPUT(WATCHDOG_PIN);
^ /tmp/arduino_build_147243/sketch/HAL.h:778:13: anm: i expansionen av makrot "WATCHDOG_PIN" SET_INPUT(WATCHDOG_PIN);
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_PIN" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:49:65: anm: i definitionen av makrot "_SET_INPUT"
define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:778:3: anm: i expansionen av makrot "SET_INPUT" SET_INPUT(WATCHDOG_PIN);
^ /tmp/arduino_build_147243/sketch/HAL.h:778:13: anm: i expansionen av makrot "WATCHDOG_PIN" SET_INPUT(WATCHDOG_PIN);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/HAL.h:796:22: anm: i expansionen av makrot "READ" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
/tmp/arduino_build_147243/sketch/HAL.h:796:27: anm: i expansionen av makrot "WATCHDOG_PIN" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_PIN" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/HAL.h:796:22: anm: i expansionen av makrot "READ" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
/tmp/arduino_build_147243/sketch/HAL.h:796:27: anm: i expansionen av makrot "WATCHDOG_PIN" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:796:3: anm: i expansionen av makrot "WRITE" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^ /tmp/arduino_build_147243/sketch/HAL.h:796:9: anm: i expansionen av makrot "WATCHDOG_PIN" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_PIN" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:796:3: anm: i expansionen av makrot "WRITE" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^ /tmp/arduino_build_147243/sketch/HAL.h:796:9: anm: i expansionen av makrot "WATCHDOG_PIN" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
/tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:796:3: anm: i expansionen av makrot "WRITE" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^ /tmp/arduino_build_147243/sketch/HAL.h:796:9: anm: i expansionen av makrot "WATCHDOG_PIN" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:92:30: fel: att sätta ihop "/ PINC.0/" och "_PIN" ger inte en giltigt preprocessorsymbol
define WATCHDOG_PIN 37 // PINC.0
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/HAL.h:796:3: anm: i expansionen av makrot "WRITE" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
^ /tmp/arduino_build_147243/sketch/HAL.h:796:9: anm: i expansionen av makrot "WATCHDOG_PIN" WRITE(WATCHDOG_PIN,READ(WATCHDOG_PIN) ? 0 : 1);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/ PINA.4, 74, STP_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:140:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_STEP_PIN,HIGH);
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
define E0_STEP_PIN ORIG_E0_STEP_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
define EXT0_STEP_PIN E0_STEP_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:140:15: anm: i expansionen av makrot "EXT0_STEP_PIN" WRITE(EXT0_STEP_PIN,HIGH);
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/ PINA.4, 74, STP_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:140:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_STEP_PIN,HIGH);
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
define E0_STEP_PIN ORIG_E0_STEP_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
define EXT0_STEP_PIN E0_STEP_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:140:15: anm: i expansionen av makrot "EXT0_STEP_PIN" WRITE(EXT0_STEP_PIN,HIGH);
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/ PINA.4, 74, STP_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:140:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_STEP_PIN,HIGH);
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
define E0_STEP_PIN ORIG_E0_STEP_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
define EXT0_STEP_PIN E0_STEP_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:140:15: anm: i expansionen av makrot "EXT0_STEP_PIN" WRITE(EXT0_STEP_PIN,HIGH);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/ PINA.4, 74, STP_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:140:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_STEP_PIN,HIGH);
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
define E0_STEP_PIN ORIG_E0_STEP_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
define EXT0_STEP_PIN E0_STEP_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:140:15: anm: i expansionen av makrot "EXT0_STEP_PIN" WRITE(EXT0_STEP_PIN,HIGH);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/ PINA.4, 74, STP_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:208:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
define E0_STEP_PIN ORIG_E0_STEP_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
define EXT0_STEP_PIN E0_STEP_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:208:15: anm: i expansionen av makrot "EXT0_STEP_PIN" WRITE(EXT0_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/ PINA.4, 74, STP_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:208:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
define E0_STEP_PIN ORIG_E0_STEP_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
define EXT0_STEP_PIN E0_STEP_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:208:15: anm: i expansionen av makrot "EXT0_STEP_PIN" WRITE(EXT0_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/ PINA.4, 74, STP_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:208:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
define E0_STEP_PIN ORIG_E0_STEP_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
define EXT0_STEP_PIN E0_STEP_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:208:15: anm: i expansionen av makrot "EXT0_STEP_PIN" WRITE(EXT0_STEP_PIN,LOW);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:67:36: fel: att sätta ihop "/ PINA.4, 74, STP_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_STEP_PIN 26 // PINA.4, 74, STP_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:208:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:375:24: anm: i expansionen av makrot "ORIG_E0_STEP_PIN"
define E0_STEP_PIN ORIG_E0_STEP_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:244:28: anm: i expansionen av makrot "E0_STEP_PIN"
define EXT0_STEP_PIN E0_STEP_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:208:15: anm: i expansionen av makrot "EXT0_STEP_PIN" WRITE(EXT0_STEP_PIN,LOW);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/ PINA.6, 72, DIR_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:280:17: anm: i expansionen av makrot "WRITE" WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
define E0_DIR_PIN ORIG_E0_DIR_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
define EXT0_DIR_PIN E0_DIR_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:280:23: anm: i expansionen av makrot "EXT0_DIR_PIN" WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/ PINA.6, 72, DIR_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:280:17: anm: i expansionen av makrot "WRITE" WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
define E0_DIR_PIN ORIG_E0_DIR_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
define EXT0_DIR_PIN E0_DIR_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:280:23: anm: i expansionen av makrot "EXT0_DIR_PIN" WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/ PINA.6, 72, DIR_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:280:17: anm: i expansionen av makrot "WRITE" WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
define E0_DIR_PIN ORIG_E0_DIR_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
define EXT0_DIR_PIN E0_DIR_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:280:23: anm: i expansionen av makrot "EXT0_DIR_PIN" WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/ PINA.6, 72, DIR_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:280:17: anm: i expansionen av makrot "WRITE" WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
define E0_DIR_PIN ORIG_E0_DIR_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
define EXT0_DIR_PIN E0_DIR_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:280:23: anm: i expansionen av makrot "EXT0_DIR_PIN" WRITE(EXT0_DIR_PIN,!EXT0_INVERSE);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/ PINA.6, 72, DIR_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:288:17: anm: i expansionen av makrot "WRITE" WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
define E0_DIR_PIN ORIG_E0_DIR_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
define EXT0_DIR_PIN E0_DIR_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:288:23: anm: i expansionen av makrot "EXT0_DIR_PIN" WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/ PINA.6, 72, DIR_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:288:17: anm: i expansionen av makrot "WRITE" WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
define E0_DIR_PIN ORIG_E0_DIR_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
define EXT0_DIR_PIN E0_DIR_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:288:23: anm: i expansionen av makrot "EXT0_DIR_PIN" WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/ PINA.6, 72, DIR_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:288:17: anm: i expansionen av makrot "WRITE" WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
define E0_DIR_PIN ORIG_E0_DIR_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
define EXT0_DIR_PIN E0_DIR_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:288:23: anm: i expansionen av makrot "EXT0_DIR_PIN" WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:68:36: fel: att sätta ihop "/ PINA.6, 72, DIR_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_DIR_PIN 28 // PINA.6, 72, DIR_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:288:17: anm: i expansionen av makrot "WRITE" WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
/tmp/arduino_build_147243/sketch/pins.h:376:23: anm: i expansionen av makrot "ORIG_E0_DIR_PIN"
define E0_DIR_PIN ORIG_E0_DIR_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:245:27: anm: i expansionen av makrot "E0_DIR_PIN"
define EXT0_DIR_PIN E0_DIR_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:288:23: anm: i expansionen av makrot "EXT0_DIR_PIN" WRITE(EXT0_DIR_PIN,EXT0_INVERSE);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:69:36: fel: att sätta ihop "/ PINA.2, 76, ENA_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_ENABLE_PIN 24 // PINA.2, 76, ENA_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:379:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
/tmp/arduino_build_147243/sketch/pins.h:377:25: anm: i expansionen av makrot "ORIG_E0_ENABLE_PIN"
define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:249:30: anm: i expansionen av makrot "E0_ENABLE_PIN"
define EXT0_ENABLE_PIN E0_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:379:15: anm: i expansionen av makrot "EXT0_ENABLE_PIN" WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
/tmp/arduino_build_147243/sketch/pins.h:69:36: fel: att sätta ihop "/ PINA.2, 76, ENA_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_ENABLE_PIN 24 // PINA.2, 76, ENA_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:379:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
/tmp/arduino_build_147243/sketch/pins.h:377:25: anm: i expansionen av makrot "ORIG_E0_ENABLE_PIN"
define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:249:30: anm: i expansionen av makrot "E0_ENABLE_PIN"
define EXT0_ENABLE_PIN E0_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:379:15: anm: i expansionen av makrot "EXT0_ENABLE_PIN" WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
/tmp/arduino_build_147243/sketch/pins.h:69:36: fel: att sätta ihop "/ PINA.2, 76, ENA_DRV4/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_E0_ENABLE_PIN 24 // PINA.2, 76, ENA_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:379:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
/tmp/arduino_build_147243/sketch/pins.h:377:25: anm: i expansionen av makrot "ORIG_E0_ENABLE_PIN"
define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:249:30: anm: i expansionen av makrot "E0_ENABLE_PIN"
define EXT0_ENABLE_PIN E0_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:379:15: anm: i expansionen av makrot "EXT0_ENABLE_PIN" WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:69:36: fel: att sätta ihop "/ PINA.2, 76, ENA_DRV4/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_E0_ENABLE_PIN 24 // PINA.2, 76, ENA_DRV4
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Extruder.h:379:9: anm: i expansionen av makrot "WRITE" WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
/tmp/arduino_build_147243/sketch/pins.h:377:25: anm: i expansionen av makrot "ORIG_E0_ENABLE_PIN"
define E0_ENABLE_PIN ORIG_E0_ENABLE_PIN
/tmp/arduino_build_147243/sketch/RF1000.h:249:30: anm: i expansionen av makrot "E0_ENABLE_PIN"
define EXT0_ENABLE_PIN E0_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Extruder.h:379:15: anm: i expansionen av makrot "EXT0_ENABLE_PIN" WRITE(EXT0_ENABLE_PIN,EXT0_ENABLE_ON );
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/ PIND.7, 50, ENA_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:266:9: anm: i expansionen av makrot "WRITE" WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:266:15: anm: i expansionen av makrot "X_ENABLE_PIN" WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/ PIND.7, 50, ENA_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:266:9: anm: i expansionen av makrot "WRITE" WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:266:15: anm: i expansionen av makrot "X_ENABLE_PIN" WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/ PIND.7, 50, ENA_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:266:9: anm: i expansionen av makrot "WRITE" WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:266:15: anm: i expansionen av makrot "X_ENABLE_PIN" WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/ PIND.7, 50, ENA_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:266:9: anm: i expansionen av makrot "WRITE" WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:266:15: anm: i expansionen av makrot "X_ENABLE_PIN" WRITE(X_ENABLE_PIN,!X_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/ PINF.2, 95, ENA_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:287:9: anm: i expansionen av makrot "WRITE" WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:287:15: anm: i expansionen av makrot "Y_ENABLE_PIN" WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/ PINF.2, 95, ENA_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:287:9: anm: i expansionen av makrot "WRITE" WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:287:15: anm: i expansionen av makrot "Y_ENABLE_PIN" WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/ PINF.2, 95, ENA_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:287:9: anm: i expansionen av makrot "WRITE" WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:287:15: anm: i expansionen av makrot "Y_ENABLE_PIN" WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/ PINF.2, 95, ENA_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:287:9: anm: i expansionen av makrot "WRITE" WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:287:15: anm: i expansionen av makrot "Y_ENABLE_PIN" WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/ PINK.0, 89, ENA_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:308:9: anm: i expansionen av makrot "WRITE" WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:308:15: anm: i expansionen av makrot "Z_ENABLE_PIN" WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/ PINK.0, 89, ENA_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:308:9: anm: i expansionen av makrot "WRITE" WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:308:15: anm: i expansionen av makrot "Z_ENABLE_PIN" WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/ PINK.0, 89, ENA_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:308:9: anm: i expansionen av makrot "WRITE" WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:308:15: anm: i expansionen av makrot "Z_ENABLE_PIN" WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/ PINK.0, 89, ENA_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:308:9: anm: i expansionen av makrot "WRITE" WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:308:15: anm: i expansionen av makrot "Z_ENABLE_PIN" WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/ PIND.7, 50, ENA_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:334:9: anm: i expansionen av makrot "WRITE" WRITE(X_ENABLE_PIN, X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:334:15: anm: i expansionen av makrot "X_ENABLE_PIN" WRITE(X_ENABLE_PIN, X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/ PIND.7, 50, ENA_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:334:9: anm: i expansionen av makrot "WRITE" WRITE(X_ENABLE_PIN, X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:334:15: anm: i expansionen av makrot "X_ENABLE_PIN" WRITE(X_ENABLE_PIN, X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/ PIND.7, 50, ENA_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:334:9: anm: i expansionen av makrot "WRITE" WRITE(X_ENABLE_PIN, X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:334:15: anm: i expansionen av makrot "X_ENABLE_PIN" WRITE(X_ENABLE_PIN, X_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:49:36: fel: att sätta ihop "/ PIND.7, 50, ENA_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_ENABLE_PIN 38 // PIND.7, 50, ENA_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:334:9: anm: i expansionen av makrot "WRITE" WRITE(X_ENABLE_PIN, X_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:359:24: anm: i expansionen av makrot "ORIG_X_ENABLE_PIN"
define X_ENABLE_PIN ORIG_X_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:334:15: anm: i expansionen av makrot "X_ENABLE_PIN" WRITE(X_ENABLE_PIN, X_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/ PINF.2, 95, ENA_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:355:9: anm: i expansionen av makrot "WRITE" WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:355:15: anm: i expansionen av makrot "Y_ENABLE_PIN" WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/ PINF.2, 95, ENA_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:355:9: anm: i expansionen av makrot "WRITE" WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:355:15: anm: i expansionen av makrot "Y_ENABLE_PIN" WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/ PINF.2, 95, ENA_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:355:9: anm: i expansionen av makrot "WRITE" WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:355:15: anm: i expansionen av makrot "Y_ENABLE_PIN" WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:55:36: fel: att sätta ihop "/ PINF.2, 95, ENA_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_ENABLE_PIN 56 // PINF.2, 95, ENA_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:355:9: anm: i expansionen av makrot "WRITE" WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:365:24: anm: i expansionen av makrot "ORIG_Y_ENABLE_PIN"
define Y_ENABLE_PIN ORIG_Y_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:355:15: anm: i expansionen av makrot "Y_ENABLE_PIN" WRITE(Y_ENABLE_PIN, Y_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/ PINK.0, 89, ENA_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:375:9: anm: i expansionen av makrot "WRITE" WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:375:15: anm: i expansionen av makrot "Z_ENABLE_PIN" WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/ PINK.0, 89, ENA_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:375:9: anm: i expansionen av makrot "WRITE" WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:375:15: anm: i expansionen av makrot "Z_ENABLE_PIN" WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/ PINK.0, 89, ENA_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:375:9: anm: i expansionen av makrot "WRITE" WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:375:15: anm: i expansionen av makrot "Z_ENABLE_PIN" WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:61:36: fel: att sätta ihop "/ PINK.0, 89, ENA_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_ENABLE_PIN 62 // PINK.0, 89, ENA_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:375:9: anm: i expansionen av makrot "WRITE" WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
/tmp/arduino_build_147243/sketch/pins.h:371:24: anm: i expansionen av makrot "ORIG_Z_ENABLE_PIN"
define Z_ENABLE_PIN ORIG_Z_ENABLE_PIN
/tmp/arduino_build_147243/sketch/Printer.h:375:15: anm: i expansionen av makrot "Z_ENABLE_PIN" WRITE(Z_ENABLE_PIN, Z_ENABLE_ON);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:404:17: anm: i expansionen av makrot "WRITE" WRITE(X_DIR_PIN,!INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:404:23: anm: i expansionen av makrot "X_DIR_PIN" WRITE(X_DIR_PIN,!INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:404:17: anm: i expansionen av makrot "WRITE" WRITE(X_DIR_PIN,!INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:404:23: anm: i expansionen av makrot "X_DIR_PIN" WRITE(X_DIR_PIN,!INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:404:17: anm: i expansionen av makrot "WRITE" WRITE(X_DIR_PIN,!INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:404:23: anm: i expansionen av makrot "X_DIR_PIN" WRITE(X_DIR_PIN,!INVERT_X_DIR);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:404:17: anm: i expansionen av makrot "WRITE" WRITE(X_DIR_PIN,!INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:404:23: anm: i expansionen av makrot "X_DIR_PIN" WRITE(X_DIR_PIN,!INVERT_X_DIR);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:418:17: anm: i expansionen av makrot "WRITE" WRITE(X_DIR_PIN,INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:418:23: anm: i expansionen av makrot "X_DIR_PIN" WRITE(X_DIR_PIN,INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:418:17: anm: i expansionen av makrot "WRITE" WRITE(X_DIR_PIN,INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:418:23: anm: i expansionen av makrot "X_DIR_PIN" WRITE(X_DIR_PIN,INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:418:17: anm: i expansionen av makrot "WRITE" WRITE(X_DIR_PIN,INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:418:23: anm: i expansionen av makrot "X_DIR_PIN" WRITE(X_DIR_PIN,INVERT_X_DIR);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:418:17: anm: i expansionen av makrot "WRITE" WRITE(X_DIR_PIN,INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:418:23: anm: i expansionen av makrot "X_DIR_PIN" WRITE(X_DIR_PIN,INVERT_X_DIR);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:441:17: anm: i expansionen av makrot "WRITE" WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:441:23: anm: i expansionen av makrot "Y_DIR_PIN" WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:441:17: anm: i expansionen av makrot "WRITE" WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:441:23: anm: i expansionen av makrot "Y_DIR_PIN" WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:441:17: anm: i expansionen av makrot "WRITE" WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:441:23: anm: i expansionen av makrot "Y_DIR_PIN" WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:441:17: anm: i expansionen av makrot "WRITE" WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:441:23: anm: i expansionen av makrot "Y_DIR_PIN" WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:455:17: anm: i expansionen av makrot "WRITE" WRITE(Y_DIR_PIN,INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:455:23: anm: i expansionen av makrot "Y_DIR_PIN" WRITE(Y_DIR_PIN,INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:455:17: anm: i expansionen av makrot "WRITE" WRITE(Y_DIR_PIN,INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:455:23: anm: i expansionen av makrot "Y_DIR_PIN" WRITE(Y_DIR_PIN,INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:455:17: anm: i expansionen av makrot "WRITE" WRITE(Y_DIR_PIN,INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:455:23: anm: i expansionen av makrot "Y_DIR_PIN" WRITE(Y_DIR_PIN,INVERT_Y_DIR);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:455:17: anm: i expansionen av makrot "WRITE" WRITE(Y_DIR_PIN,INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:455:23: anm: i expansionen av makrot "Y_DIR_PIN" WRITE(Y_DIR_PIN,INVERT_Y_DIR);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:476:4: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:476:11: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:476:4: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:476:11: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:476:4: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:476:11: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:476:4: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:476:11: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, !INVERT_Z_DIR );
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:491:4: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:491:11: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:491:4: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:491:11: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:491:4: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:491:11: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, INVERT_Z_DIR );
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:491:4: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, INVERT_Z_DIR );
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:491:11: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, INVERT_Z_DIR );
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:507:18: anm: i expansionen av makrot "READ" return ((READ(Z_DIR_PIN)!=0) ^ INVERT_Z_DIR);
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:507:23: anm: i expansionen av makrot "Z_DIR_PIN" return ((READ(Z_DIR_PIN)!=0) ^ INVERT_Z_DIR);
/tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:507:18: anm: i expansionen av makrot "READ" return ((READ(Z_DIR_PIN)!=0) ^ INVERT_Z_DIR);
/tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:507:23: anm: i expansionen av makrot "Z_DIR_PIN" return ((READ(Z_DIR_PIN)!=0) ^ INVERT_Z_DIR);
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:525:17: anm: i expansionen av makrot "READ" return((READ(Y_DIR_PIN)!=0) ^ INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:525:22: anm: i expansionen av makrot "Y_DIR_PIN" return((READ(Y_DIR_PIN)!=0) ^ INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:54:36: fel: att sätta ihop "/ PINF.7, 90, DIR_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_DIR_PIN 61 // PINF.7, 90, DIR_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:525:17: anm: i expansionen av makrot "READ" return((READ(Y_DIR_PIN)!=0) ^ INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:364:22: anm: i expansionen av makrot "ORIG_Y_DIR_PIN"
define Y_DIR_PIN ORIG_Y_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:525:22: anm: i expansionen av makrot "Y_DIR_PIN" return((READ(Y_DIR_PIN)!=0) ^ INVERT_Y_DIR);
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:530:17: anm: i expansionen av makrot "READ" return((READ(X_DIR_PIN)!=0) ^ INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:530:22: anm: i expansionen av makrot "X_DIR_PIN" return((READ(X_DIR_PIN)!=0) ^ INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:48:36: fel: att sätta ihop "/ PINF.1, 96, DIR_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_DIR_PIN 55 // PINF.1, 96, DIR_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:530:17: anm: i expansionen av makrot "READ" return((READ(X_DIR_PIN)!=0) ^ INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:358:22: anm: i expansionen av makrot "ORIG_X_DIR_PIN"
define X_DIR_PIN ORIG_X_DIR_PIN
/tmp/arduino_build_147243/sketch/Printer.h:530:22: anm: i expansionen av makrot "X_DIR_PIN" return((READ(X_DIR_PIN)!=0) ^ INVERT_X_DIR);
/tmp/arduino_build_147243/sketch/pins.h:50:36: fel: att sätta ihop "/ PINE.5, 7, ES1/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_MIN_PIN 3 // PINE.5, 7, ES1
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:636:16: anm: i expansionen av makrot "READ" return READ(X_MIN_PIN) != ENDSTOP_X_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:360:22: anm: i expansionen av makrot "ORIG_X_MIN_PIN"
define X_MIN_PIN ORIG_X_MIN_PIN
/tmp/arduino_build_147243/sketch/Printer.h:636:21: anm: i expansionen av makrot "X_MIN_PIN" return READ(X_MIN_PIN) != ENDSTOP_X_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:50:36: fel: att sätta ihop "/ PINE.5, 7, ES1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_MIN_PIN 3 // PINE.5, 7, ES1
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:636:16: anm: i expansionen av makrot "READ" return READ(X_MIN_PIN) != ENDSTOP_X_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:360:22: anm: i expansionen av makrot "ORIG_X_MIN_PIN"
define X_MIN_PIN ORIG_X_MIN_PIN
/tmp/arduino_build_147243/sketch/Printer.h:636:21: anm: i expansionen av makrot "X_MIN_PIN" return READ(X_MIN_PIN) != ENDSTOP_X_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:56:36: fel: att sätta ihop "/ PINE.4, 6, ES2/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_MIN_PIN 2 // PINE.4, 6, ES2
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:645:16: anm: i expansionen av makrot "READ" return READ(Y_MIN_PIN) != ENDSTOP_Y_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:366:22: anm: i expansionen av makrot "ORIG_Y_MIN_PIN"
define Y_MIN_PIN ORIG_Y_MIN_PIN
/tmp/arduino_build_147243/sketch/Printer.h:645:21: anm: i expansionen av makrot "Y_MIN_PIN" return READ(Y_MIN_PIN) != ENDSTOP_Y_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:56:36: fel: att sätta ihop "/ PINE.4, 6, ES2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_MIN_PIN 2 // PINE.4, 6, ES2
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:645:16: anm: i expansionen av makrot "READ" return READ(Y_MIN_PIN) != ENDSTOP_Y_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:366:22: anm: i expansionen av makrot "ORIG_Y_MIN_PIN"
define Y_MIN_PIN ORIG_Y_MIN_PIN
/tmp/arduino_build_147243/sketch/Printer.h:645:21: anm: i expansionen av makrot "Y_MIN_PIN" return READ(Y_MIN_PIN) != ENDSTOP_Y_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:64:36: fel: att sätta ihop "/ PINC.6, 59, ES3/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_MIN_PIN 31 // PINC.6, 59, ES3
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:663:12: anm: i expansionen av makrot "READ" return READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:372:22: anm: i expansionen av makrot "ORIG_Z_MIN_PIN"
define Z_MIN_PIN ORIG_Z_MIN_PIN
/tmp/arduino_build_147243/sketch/Printer.h:663:17: anm: i expansionen av makrot "Z_MIN_PIN" return READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:64:36: fel: att sätta ihop "/ PINC.6, 59, ES3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_MIN_PIN 31 // PINC.6, 59, ES3
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:663:12: anm: i expansionen av makrot "READ" return READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:372:22: anm: i expansionen av makrot "ORIG_Z_MIN_PIN"
define Z_MIN_PIN ORIG_Z_MIN_PIN
/tmp/arduino_build_147243/sketch/Printer.h:663:17: anm: i expansionen av makrot "Z_MIN_PIN" return READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:64:36: fel: att sätta ihop "/ PINC.6, 59, ES3/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_MIN_PIN 31 // PINC.6, 59, ES3
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:675:7: anm: i expansionen av makrot "READ" if( READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING )
/tmp/arduino_build_147243/sketch/pins.h:372:22: anm: i expansionen av makrot "ORIG_Z_MIN_PIN"
define Z_MIN_PIN ORIG_Z_MIN_PIN
/tmp/arduino_build_147243/sketch/Printer.h:675:12: anm: i expansionen av makrot "Z_MIN_PIN" if( READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING )
/tmp/arduino_build_147243/sketch/pins.h:64:36: fel: att sätta ihop "/ PINC.6, 59, ES3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_MIN_PIN 31 // PINC.6, 59, ES3
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:675:7: anm: i expansionen av makrot "READ" if( READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING )
/tmp/arduino_build_147243/sketch/pins.h:372:22: anm: i expansionen av makrot "ORIG_Z_MIN_PIN"
define Z_MIN_PIN ORIG_Z_MIN_PIN
/tmp/arduino_build_147243/sketch/Printer.h:675:12: anm: i expansionen av makrot "Z_MIN_PIN" if( READ(Z_MIN_PIN) != ENDSTOP_Z_MIN_INVERTING )
/tmp/arduino_build_147243/sketch/pins.h:65:36: fel: att sätta ihop "/ PINC.6, 59, ES3/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_MAX_PIN 31 // PINC.6, 59, ES3
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:763:12: anm: i expansionen av makrot "READ" return READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:373:22: anm: i expansionen av makrot "ORIG_Z_MAX_PIN"
define Z_MAX_PIN ORIG_Z_MAX_PIN
/tmp/arduino_build_147243/sketch/Printer.h:763:17: anm: i expansionen av makrot "Z_MAX_PIN" return READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:65:36: fel: att sätta ihop "/ PINC.6, 59, ES3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_MAX_PIN 31 // PINC.6, 59, ES3
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:763:12: anm: i expansionen av makrot "READ" return READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:373:22: anm: i expansionen av makrot "ORIG_Z_MAX_PIN"
define Z_MAX_PIN ORIG_Z_MAX_PIN
/tmp/arduino_build_147243/sketch/Printer.h:763:17: anm: i expansionen av makrot "Z_MAX_PIN" return READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING;
/tmp/arduino_build_147243/sketch/pins.h:65:36: fel: att sätta ihop "/ PINC.6, 59, ES3/" och "_RPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_MAX_PIN 31 // PINC.6, 59, ES3
/tmp/arduino_build_147243/sketch/fastio.h:40:37: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:775:7: anm: i expansionen av makrot "READ" if( READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING )
/tmp/arduino_build_147243/sketch/pins.h:373:22: anm: i expansionen av makrot "ORIG_Z_MAX_PIN"
define Z_MAX_PIN ORIG_Z_MAX_PIN
/tmp/arduino_build_147243/sketch/Printer.h:775:12: anm: i expansionen av makrot "Z_MAX_PIN" if( READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING )
/tmp/arduino_build_147243/sketch/pins.h:65:36: fel: att sätta ihop "/ PINC.6, 59, ES3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_MAX_PIN 31 // PINC.6, 59, ES3
/tmp/arduino_build_147243/sketch/fastio.h:40:64: anm: i definitionen av makrot "_READ"
define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN)))
/tmp/arduino_build_147243/sketch/Printer.h:775:7: anm: i expansionen av makrot "READ" if( READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING )
/tmp/arduino_build_147243/sketch/pins.h:373:22: anm: i expansionen av makrot "ORIG_Z_MAX_PIN"
define Z_MAX_PIN ORIG_Z_MAX_PIN
/tmp/arduino_build_147243/sketch/Printer.h:775:12: anm: i expansionen av makrot "Z_MAX_PIN" if( READ(Z_MAX_PIN) != ENDSTOP_Z_MAX_INVERTING )
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/ PINF.0, 97, STP_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:898:9: anm: i expansionen av makrot "WRITE" WRITE(X_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
define X_STEP_PIN ORIG_X_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:898:15: anm: i expansionen av makrot "X_STEP_PIN" WRITE(X_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/ PINF.0, 97, STP_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:898:9: anm: i expansionen av makrot "WRITE" WRITE(X_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
define X_STEP_PIN ORIG_X_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:898:15: anm: i expansionen av makrot "X_STEP_PIN" WRITE(X_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/ PINF.0, 97, STP_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:898:9: anm: i expansionen av makrot "WRITE" WRITE(X_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
define X_STEP_PIN ORIG_X_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:898:15: anm: i expansionen av makrot "X_STEP_PIN" WRITE(X_STEP_PIN,LOW);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/ PINF.0, 97, STP_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:898:9: anm: i expansionen av makrot "WRITE" WRITE(X_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
define X_STEP_PIN ORIG_X_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:898:15: anm: i expansionen av makrot "X_STEP_PIN" WRITE(X_STEP_PIN,LOW);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/ PINF.6, 91, STP_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:899:9: anm: i expansionen av makrot "WRITE" WRITE(Y_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
define Y_STEP_PIN ORIG_Y_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:899:15: anm: i expansionen av makrot "Y_STEP_PIN" WRITE(Y_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/ PINF.6, 91, STP_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:899:9: anm: i expansionen av makrot "WRITE" WRITE(Y_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
define Y_STEP_PIN ORIG_Y_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:899:15: anm: i expansionen av makrot "Y_STEP_PIN" WRITE(Y_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/ PINF.6, 91, STP_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:899:9: anm: i expansionen av makrot "WRITE" WRITE(Y_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
define Y_STEP_PIN ORIG_Y_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:899:15: anm: i expansionen av makrot "Y_STEP_PIN" WRITE(Y_STEP_PIN,LOW);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/ PINF.6, 91, STP_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:899:9: anm: i expansionen av makrot "WRITE" WRITE(Y_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
define Y_STEP_PIN ORIG_Y_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:899:15: anm: i expansionen av makrot "Y_STEP_PIN" WRITE(Y_STEP_PIN,LOW);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:900:9: anm: i expansionen av makrot "WRITE" WRITE(Z_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:900:15: anm: i expansionen av makrot "Z_STEP_PIN" WRITE(Z_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:900:9: anm: i expansionen av makrot "WRITE" WRITE(Z_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:900:15: anm: i expansionen av makrot "Z_STEP_PIN" WRITE(Z_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:900:9: anm: i expansionen av makrot "WRITE" WRITE(Z_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:900:15: anm: i expansionen av makrot "Z_STEP_PIN" WRITE(Z_STEP_PIN,LOW);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/Printer.h:900:9: anm: i expansionen av makrot "WRITE" WRITE(Z_STEP_PIN,LOW);
/tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/Printer.h:900:15: anm: i expansionen av makrot "Z_STEP_PIN" WRITE(Z_STEP_PIN,LOW);
In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/ PINF.0, 97, STP_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:445:9: anm: i expansionen av makrot "WRITE" WRITE(X_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
define X_STEP_PIN ORIG_X_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:445:15: anm: i expansionen av makrot "X_STEP_PIN" WRITE(X_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/ PINF.0, 97, STP_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:445:9: anm: i expansionen av makrot "WRITE" WRITE(X_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
define X_STEP_PIN ORIG_X_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:445:15: anm: i expansionen av makrot "X_STEP_PIN" WRITE(X_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/ PINF.0, 97, STP_DRV1/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:445:9: anm: i expansionen av makrot "WRITE" WRITE(X_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
define X_STEP_PIN ORIG_X_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:445:15: anm: i expansionen av makrot "X_STEP_PIN" WRITE(X_STEP_PIN,HIGH); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:47:36: fel: att sätta ihop "/ PINF.0, 97, STP_DRV1/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_X_STEP_PIN 54 // PINF.0, 97, STP_DRV1
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:445:9: anm: i expansionen av makrot "WRITE" WRITE(X_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:357:23: anm: i expansionen av makrot "ORIG_X_STEP_PIN"
define X_STEP_PIN ORIG_X_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:445:15: anm: i expansionen av makrot "X_STEP_PIN" WRITE(X_STEP_PIN,HIGH); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/ PINF.6, 91, STP_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:461:9: anm: i expansionen av makrot "WRITE" WRITE(Y_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
define Y_STEP_PIN ORIG_Y_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:461:15: anm: i expansionen av makrot "Y_STEP_PIN" WRITE(Y_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/ PINF.6, 91, STP_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:461:9: anm: i expansionen av makrot "WRITE" WRITE(Y_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
define Y_STEP_PIN ORIG_Y_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:461:15: anm: i expansionen av makrot "Y_STEP_PIN" WRITE(Y_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/ PINF.6, 91, STP_DRV2/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:461:9: anm: i expansionen av makrot "WRITE" WRITE(Y_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
define Y_STEP_PIN ORIG_Y_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:461:15: anm: i expansionen av makrot "Y_STEP_PIN" WRITE(Y_STEP_PIN,HIGH); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:53:36: fel: att sätta ihop "/ PINF.6, 91, STP_DRV2/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Y_STEP_PIN 60 // PINF.6, 91, STP_DRV2
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:461:9: anm: i expansionen av makrot "WRITE" WRITE(Y_STEP_PIN,HIGH); ^ /tmp/arduino_build_147243/sketch/pins.h:363:23: anm: i expansionen av makrot "ORIG_Y_STEP_PIN"
define Y_STEP_PIN ORIG_Y_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:461:15: anm: i expansionen av makrot "Y_STEP_PIN" WRITE(Y_STEP_PIN,HIGH); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:628:2: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/motion.h:628:9: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:628:2: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/motion.h:628:9: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:628:2: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/motion.h:628:9: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, INVERT_Z_DIR ); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:628:2: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/motion.h:628:9: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, INVERT_Z_DIR ); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:643:2: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, !INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/motion.h:643:9: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, !INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:643:2: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, !INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/motion.h:643:9: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, !INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:643:2: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, !INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/motion.h:643:9: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, !INVERT_Z_DIR ); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:60:36: fel: att sätta ihop "/ PINL.1, 36, DIR_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_DIR_PIN 48 // PINL.1, 36, DIR_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:643:2: anm: i expansionen av makrot "WRITE" WRITE( Z_DIR_PIN, !INVERT_Z_DIR ); ^ /tmp/arduino_build_147243/sketch/pins.h:370:22: anm: i expansionen av makrot "ORIG_Z_DIR_PIN"
define Z_DIR_PIN ORIG_Z_DIR_PIN
/tmp/arduino_build_147243/sketch/motion.h:643:9: anm: i expansionen av makrot "Z_DIR_PIN" WRITE( Z_DIR_PIN, !INVERT_Z_DIR ); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:658:5: anm: i expansionen av makrot "WRITE" WRITE( Z_STEP_PIN,HIGH ); ^ /tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:658:12: anm: i expansionen av makrot "Z_STEP_PIN" WRITE( Z_STEP_PIN,HIGH ); ^ /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:658:5: anm: i expansionen av makrot "WRITE" WRITE( Z_STEP_PIN,HIGH ); ^ /tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:658:12: anm: i expansionen av makrot "Z_STEP_PIN" WRITE( Z_STEP_PIN,HIGH ); ^ /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:658:5: anm: i expansionen av makrot "WRITE" WRITE( Z_STEP_PIN,HIGH ); ^ /tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:658:12: anm: i expansionen av makrot "Z_STEP_PIN" WRITE( Z_STEP_PIN,HIGH ); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:658:5: anm: i expansionen av makrot "WRITE" WRITE( Z_STEP_PIN,HIGH ); ^ /tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:658:12: anm: i expansionen av makrot "Z_STEP_PIN" WRITE( Z_STEP_PIN,HIGH ); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:46: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:673:5: anm: i expansionen av makrot "WRITE" WRITE( Z_STEP_PIN, LOW ); ^ /tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:673:12: anm: i expansionen av makrot "Z_STEP_PIN" WRITE( Z_STEP_PIN, LOW ); ^ /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:74: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:673:5: anm: i expansionen av makrot "WRITE" WRITE( Z_STEP_PIN, LOW ); ^ /tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:673:12: anm: i expansionen av makrot "Z_STEP_PIN" WRITE( Z_STEP_PIN, LOW ); ^ /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_WPORT" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:103: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:673:5: anm: i expansionen av makrot "WRITE" WRITE( Z_STEP_PIN, LOW ); ^ /tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:673:12: anm: i expansionen av makrot "Z_STEP_PIN" WRITE( Z_STEP_PIN, LOW ); ^ In file included from /tmp/arduino_build_147243/sketch/HAL.h:57:0, from /tmp/arduino_build_147243/sketch/Repetier.h:36, from /usr/home/bernt/nerladdningar/vebb/Repetier-Firmware-development/RF1000/Repetier/Repetier.ino:112: /tmp/arduino_build_147243/sketch/pins.h:59:36: fel: att sätta ihop "/ PINL.3, 38, STP_DRV3/" och "_PIN" ger inte en giltigt preprocessorsymbol
define ORIG_Z_STEP_PIN 46 // PINL.3, 38, STP_DRV3
/tmp/arduino_build_147243/sketch/fastio.h:43:132: anm: i definitionen av makrot "_WRITE"
define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0)
/tmp/arduino_build_147243/sketch/motion.h:673:5: anm: i expansionen av makrot "WRITE" WRITE( Z_STEP_PIN, LOW ); ^ /tmp/arduino_build_147243/sketch/pins.h:369:23: anm: i expansionen av makrot "ORIG_Z_STEP_PIN"
define Z_STEP_PIN ORIG_Z_STEP_PIN
/tmp/arduino_build_147243/sketch/motion.h:673:12: anm: i expansionen av makrot "Z_STEP_PIN" WRITE( Z_STEP_PIN, LOW ); ^ Using library SPI at version 1.0 in folder: /usr/local/arduino/hardware/arduino/avr/libraries/SPI Using library Wire at version 1.0 in folder: /usr/local/arduino/hardware/arduino/avr/libraries/Wire exit status 1 Error compiling for board Arduino/Genuino Mega or Mega 2560.