Closed tbone4711 closed 5 years ago
Die Länge der Daten ist derzeit länger, als bislang bekannt. Das könnte an einer Wiederholung ohne Pause liegen.
@ralf9 @pejonp:. Könnt ihr euch das ansehen?
Hallo Sidey79,
ist jetzt ein Schuß ins Blaue. Sind die Werte schon umgewandel ? Hier mal die Werte aus dem Hideki-Protokoll
Byte 0: Header byte, always 0x75
Byte 1: Device ID
0x80 – 0x9F Rain sensor, UV sensor or anemometer Timing: 33 Seconds
Byte 2: Package Length
Byte 3: Device type (Byte3 & 0x1F) 0x0C Anemometer
Byte 4..n:The actual device data
Byte n+1:Checksum
Byte n+2:Second checksum byte
Example of wind measurement: Decrypted data: 75,8F,D6,8C,25,C1,24,C1,34,90,03,A8 The A of byte 11 translates to 4 using the “WindDirSeg” routine at the end of this document. This tells us that the wind comes from the direction 4x22.5 = 90°, this is east. According to the 8 of the same byte it turned to this angle from the south. The gust speed is 03.9 mph, the wind speed is 03.4 mph. The wind chill is +12.4°C, the air temperature is +12.5°C. And this data looks like a Christmas tree.
Nein, da ist noch nichts umgewandelt, da es mehr als max_bits sind
"Jörg" notifications@github.com schrieb am 21.01.2017:
Hallo Sidey79,
ist jetzt ein Schuß ins Blaue. Sind die Werte schon umgewandel ? Hier mal die Werte aus dem Hideki-Protokoll Byte 0: Header byte, always 0x75 Byte 1: Device ID
0x80 – 0x9F Rain sensor, UV sensor or anemometer Timing: 33 Seconds Byte 2: Package Length Byte 3: Device type (Byte3 & 0x1F) 0x0C Anemometer Byte 4..n:The actual device data Byte n+1:Checksum Byte n+2:Second checksum byteExample of wind measurement: Decrypted data: 75,8F,D6,8C,25,C1,24,C1,34,90,03,A8 The A of byte 11 translates to 4 using the “WindDirSeg” routine at the end of this document. This tells us that the wind comes from the direction 4x22.5 = 90°, this is east. According to the 8 of the same byte it turned to this angle from the south. The gust speed is 03.9 mph, the wind speed is 03.4 mph. The wind chill is +12.4°C, the air temperature is +12.5°C. And this data looks like a Christmas tree.
-- Diese Nachricht wurde mit K-@ Mail gesendet.
eigentlich müsste doch beim Hideki Protokoll in der extracted data das 0x75 enthalten sein. Ich habe mal mit dem dummy sduino ein paar raw Nachrichten simuliert. In den extracted data konnte ich das 0x75 (bin=01110101 oder invers 10001010) nicht finden. Oder mache ich da einen Denkfehler?
Naja, wenn Du die hexwert in Bits umgewandelt hast, dann würde es mit dem Suchmuster passen
Ich habe Mal ein paar hexwert umgewandelt. Wir suchen nach 1010 1110, wegen verdrehter Bitfolge:
8ae8 z.B.
1000 1010 1110 1000
Würde also passen, die Nachricht war nur länger als erwartet.
Ich hab mal die maxlänge auf 128 erhöht:
` 2017.01.21 23:28:18.553 4: dummyDuino Sensor Typ 12 not supported, please report sensor information! 2017.01.21 23:28:18.550 4: Hideki_Parse SensorTyp = 12 decodedString = 758ed6cc98c198c107000094077103 2017.01.21 23:28:18.546 4: Hideki_Parse dummyDuino incomming P12#757AB24488BF88BFFD00008CFD2F01 2017.01.21 23:28:18.356 5: dummyDuino: dispatch P12#757AB24488BF88BFFD00008CFD2F01 2017.01.21 23:28:18.350 5: dummyDuino: converted Data to (P12#757AB24488BF88BFFD00008CFD2F01) 2017.01.21 23:28:18.347 4: dummyDuino: hideki protocol converted to hex: 757AB24488BF88BFFD00008CFD2F01 with 127 bits, messagestart 1
`
Sieht also prinzipiell nach Hideki aus, aber wir wissen noch nichts von Sensor Typ 12
Habe mal eine Erweiterung gemacht. Die Temperatur würde dann schon mal ausgegeben
Der Sensor Typ 12 ist der Anemometer, dies müsste noch in das Hideki Modul eingebaut werden. In der Crestaprotocol.pdf ist es beschrieben
Der Sensor Typ 12 ist jetzt im Hideki Modul eingebaut, bitte mal testen, ob die Werte passen
update all https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r33/controls_signalduino.txt
Servus.
Hab mal aktualisiert und siehe da, was da nun mit verbose 5 kommt:
2017-01-26 22:26:22 SIGNALduino sduino UNKNOWNCODE u40#000000020 2017-01-26 22:26:55 SIGNALduino sduino opened 2017-01-26 22:26:55 SIGNALduino sduino UNKNOWNCODE u40#000000020 2017-01-26 22:27:28 SIGNALduino sduino UNKNOWNCODE u40#000000020 2017-01-26 22:28:09 SIGNALduino sduino opened 2017-01-26 22:28:09 SIGNALduino sduino UNKNOWNCODE u40#000000000 button pressed 2017-01-26 22:29:17 SIGNALduino sduino opened 2017-01-26 22:29:17 SIGNALduino sduino UNKNOWNCODE u40#0000 2017-01-26 22:29:17 SIGNALduino sduino opened 2017-01-26 22:29:17 SIGNALduino sduino UNKNOWNCODE u40#000000000 2017-01-26 22:29:17 SIGNALduino sduino opened 2017-01-26 22:29:17 SIGNALduino sduino UNKNOWNCODE u40#000 2017-01-26 22:29:17 SIGNALduino sduino opened 2017-01-26 22:29:17 SIGNALduino sduino UNKNOWNCODE u40#0000 2017-01-26 22:29:17 SIGNALduino sduino opened 2017-01-26 22:29:17 SIGNALduino sduino UNKNOWNCODE u40#0000000004
Einem Laien wie mir sagt das aber leider noch nix.
Kann ich mit weiteren Tests helfen?
-Tbone
Könnt ihr vielleicht bei RFXtrx oder RFLink etwas abschauen, denn laut Supportliste können beide mit diesem Sensor umgehen?
-Tbone
Ist das aus dem Event Log oder aus dem Logfile?
So, nun mit der neuesten Modul- und Firmware Version.
version V 3.3.1-dev SIGNALduino - compiled at Jan 3 2017 23:59:32
fhem.log
2017.02.13 23:54:50 4: sduino/msg READ: MU;P0=-162;P1=117;P3=-407;P5=-117;D=01010101013101013101010101315131010131015101010151010;CP=1; 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: Starting demodulation at Position 11 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.02.13 23:54:50 4: sduino/msg READ: MU;P0=-139;P1=141;P2=-100;P5=-360;D=0101012121012101215101210121012101010101210101010101012121010101;CP=1; 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: start pattern for MU Protocol id 20 -> livolo mismatches, aborting 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.02.13 23:54:50 4: sduino/msg READ: MU;P0=138;P1=-144;P2=-664;P3=104;P5=376;P6=-96;D=0102313131010101013101310151013101360131315101;CP=3; 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: Starting demodulation at Position 4 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 24 -> visivon remote matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: start pattern for MU Protocol id 24 -> visivon remote mismatches, aborting 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: start pattern for MU Protocol id 29 -> HT12e remote mismatches, aborting 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.02.13 23:54:50 4: sduino/msg READ: MU;P0=159;P1=-126;P6=444;D=0101010101010101010101010101010101010101610101010;CP=0; 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.02.13 23:54:50 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate 2017.02.13 23:54:50 5: sduino: Starting demodulation at Position 41 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.02.13 23:54:50 4: sduino/msg READ: MU;P0=207;P1=-161;P3=125;P4=-121;D=01013101040104013131040401040404340104010404040401040;CP=0; 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.02.13 23:54:50 5: sduino: applying filterfunc SIGNALduino_compPattern
Könnt ihr daraus mehr als vorher ersehen?
-Tbone
Habt ihr eine Möglichkeit bei RFXTRX oder RFlink was abzukupfern, denn die beiden Systeme können mit dem Teil umgehen? -Tbone
Rfxtrx ist closed source.
Als was wird der Sensor im rflink erkannt?
Hi. Durch Zufall habe ich einen RFXtrx433 in die Hände bokommen und somit die Daten vergleichen können.
2017.03.12 16:08:07 4: sduino decoded Hideki protocol model=Hideki_12, sensor id=99, channel=4, bat=ok, temp=20, Wc=20, Ws=0.00, Wg=0, Wd=11, WdDeg=247.5, Wdtxt=WSW
2017.03.12 16:08:40 5: TRX_WEATHER: name=TFA_WIND_22 device=TFA_WIND_22 wind_dir 112 ESE
Grundsätzlich wird aber der Sensor schon richtig erkannt und angelegt. Tolle Arbeit! -Tbone
Hier mal das FHEM Log beim gleichzeitigen Empfang des Windsensors.
2017.03.12 16:05:59 1: Including /opt/fhem/fhem.cfg 2017.03.12 16:05:59 3: telnetPort: port 7072 opened 2017.03.12 16:05:59 3: WEB: port 8083 opened 2017.03.12 16:05:59 3: WEBphone: port 8084 opened 2017.03.12 16:05:59 3: WEBtablet: port 8085 opened 2017.03.12 16:05:59 2: eventTypes: loaded 688 events from ./log/eventTypes.txt 2017.03.12 16:05:59 3: Opening myRFX device /dev/ttyUSB0 2017.03.12 16:05:59 3: Setting myRFX serial parameters to 38400,8,N,1 2017.03.12 16:06:02 1: TRX: Init OK 2017.03.12 16:06:02 1: TRX: Init status: '433.92MHz transceiver, firmware=1015, protocols enabled: LaCrosse Hideki OREGON HOMEEASY AC ARC ' 2017.03.12 16:06:02 3: myRFX device opened 2017.03.12 16:06:02 3: sduino: IDlist MS 0 1 13 14 15 17 2 22 23 25 3 32 33 35 38 4 41 45 51 55 6 7 2017.03.12 16:06:02 3: sduino: IDlist MU 13.1 16 20 21 24 26 27 28 29 30 31 34 36 37 39 40 44 44.1 46 48 49 5 50 56 59 60 8 9 2017.03.12 16:06:02 3: sduino: IDlist MC 10 11 12 18 43 47 52 57 58 2017.03.12 16:06:02 3: Opening sduino device /dev/ttyUSB1 2017.03.12 16:06:02 3: Setting sduino serial parameters to 57600,8,N,1 2017.03.12 16:06:02 1: sduino/define: /dev/ttyUSB1@57600 2017.03.12 16:06:02 1: sduino/init: /dev/ttyUSB1@57600 2017.03.12 16:06:02 3: sduino device opened 2017.03.12 16:06:02 3: sduino: setting Verbose to: 5 2017.03.12 16:06:02 1: Including ./log/fhem.save 2017.03.12 16:06:02 1: usb create starting 2017.03.12 16:06:02 1: usb create end 2017.03.12 16:06:02 2: SecurityCheck: WEB,WEBphone,WEBtablet has no associated allowed device with basicAuth. telnetPort has no associated allowed device with password/globalpassword. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message. 2017.03.12 16:06:02 0: Featurelevel: 5.8 2017.03.12 16:06:02 0: Server started with 11 defined entities (fhem.pl:13622/2017-03-05 perl:5.022003 os:linux user:fhem pid:6895) 2017.03.12 16:06:04 3: sduino/init: disable receiver (XQ) 2017.03.12 16:06:04 5: sduino SW: XQ 2017.03.12 16:06:04 3: sduino/init: get version, retry = 0 2017.03.12 16:06:04 5: sduino SW: V 2017.03.12 16:06:04 4: sduino/msg READ: V 3.3.1-dev SIGNALduino - compiled at Jan 3 2017 23:59:32 2017.03.12 16:06:04 5: sduino/msg READ: regexp=V\s.*SIGNAL(duino|ESP).* cmd=version msg=V 3.3.1-dev SIGNALduino - compiled at Jan 3 2017 23:59:32 2017.03.12 16:06:04 2: sduino: initialized. v3.3.1-dev 2017.03.12 16:06:04 5: sduino SW: XE 2017.03.12 16:06:04 3: sduino/init: enable receiver (XE) 2017.03.12 16:06:07 4: sduino/msg READ: MU;P0=454;P1=852;P3=-132;P6=-1007;P7=1433;D=676760606060316067676767676767606067606060676067676060676067606067676067606767676060606760676767676767;CP=0; 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting 2017.03.12 16:06:07 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: start pattern for MU Protocol id 21 -> einhell garagedoor mismatches, aborting 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: Starting demodulation at Position 6 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting 2017.03.12 16:06:07 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: start pattern for MU Protocol id 49 -> quigg_gt9000 mismatches, aborting 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: Starting demodulation at Position 1 2017.03.12 16:06:07 5: sduino: dispatching bits: 0 1 1 1 1 1 1 1 0 0 1 0 0 0 1 0 1 1 0 0 1 0 1 0 0 1 1 0 1 0 1 1 1 0 0 0 1 0 1 1 1 1 1 0 2017.03.12 16:06:07 4: sduino: decoded matched MU Protocol id 5 dmsg p5#7F22CA6B8BE length 44 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: Starting demodulation at Position 1 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 59 -> AK-HD-4 matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: start pattern for MU Protocol id 59 -> AK-HD-4 mismatches, aborting 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: Starting demodulation at Position 5 2017.03.12 16:06:07 4: sduino: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate 2017.03.12 16:06:07 5: sduino: Starting demodulation at Position 1 2017.03.12 16:06:55 4: sduino/msg READ: MU;P0=864;P1=-972;P2=1469;P3=494;P4=-23184;D=01212121212121313121313131213121213131213121313121213121312121213131312131212121212124313131313131312131212131313121312121212121212131312131313121312121313121312131312121312131212121313131213121212121212431313131313131213121213131312131212121212121213131;CP=3;O; 2017.03.12 16:06:55 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 15 2017.03.12 16:06:55 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 2 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 0 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 2 2017.03.12 16:06:55 4: sduino/msg READ: MU;P0=1464;P1=-976;P2=488;D=0121212101210101212101210121210101210121010101212121012101010101010;CP=2; 2017.03.12 16:06:55 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 3 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting 2017.03.12 16:06:55 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 0 2017.03.12 16:06:55 5: sduino: dispatching bits: 1 0 0 0 1 0 1 1 0 0 1 0 1 0 0 1 1 0 1 0 1 1 1 0 0 0 1 0 1 1 1 1 1 0 0 0 2017.03.12 16:06:55 4: sduino: decoded matched MU Protocol id 5 dmsg p5#8B29AE2F8 length 36 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 0 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 2 2017.03.12 16:06:55 4: sduino: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate 2017.03.12 16:06:55 5: sduino: Starting demodulation at Position 0 2017.03.12 16:07:04 4: sduino/keepalive ok, retry = 0 2017.03.12 16:07:35 5: Starting notify loop for global, 1 event(s), first is ATTR global verbose 5 2017.03.12 16:07:35 5: createNotifyHash 2017.03.12 16:07:35 5: End notify loop for global 2017.03.12 16:07:35 4: WEB: /fhem?cmd.attrglobal%3Dattr%20global%20verbose%205&XHR=1&fwcsrf=csrf_805586029991982&fw_id=27 / RL:20 / text/plain; charset=UTF-8 / Content-Encoding: gzip / 2017.03.12 16:07:43 4: sduino/msg READ: MU;P0=-464;P1=442;P2=-1005;P3=1433;D=0121212121212123212323212121232123232323232323212123212121232123232121232123212123232123212323232121212321232323232323;CP=1; 2017.03.12 16:07:43 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: Starting demodulation at Position 2 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting 2017.03.12 16:07:43 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: Starting demodulation at Position 1 2017.03.12 16:07:43 5: sduino: dispatching bits: 0 0 0 0 0 0 0 1 0 1 1 0 0 0 1 0 1 1 1 1 1 1 1 0 0 1 0 0 0 1 0 1 1 0 0 1 0 1 0 0 1 1 0 1 0 1 1 1 0 0 0 1 0 1 1 1 1 1 0 0 2017.03.12 16:07:43 4: sduino: decoded matched MU Protocol id 5 dmsg p5#0162FE4594D717C length 60 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: Starting demodulation at Position 1 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: Starting demodulation at Position 1 2017.03.12 16:07:43 4: sduino: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate 2017.03.12 16:07:43 5: sduino: Starting demodulation at Position 1 2017.03.12 16:08:04 4: sduino/keepalive ok, retry = 0 2017.03.12 16:08:07 4: sduino/msg READ: MU;P0=874;P1=374;P3=-587;P5=-320;P6=1560;P7=-1079;D=13156707031317130313170313171313071303170713130713130317131313131313131313130313131317071313131313131313131303131313170713131313131313131313131313131313131313131313131313131313131313071307131313031713070313170317131;CP=1; 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 16 -> Dooya shutter mismatches, aborting 2017.03.12 16:08:07 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 21 -> einhell garagedoor mismatches, aborting 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 26 -> remote26 mismatches, aborting 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 30 -> unitec47031 mismatches, aborting 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: Starting demodulation at Position 13 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting 2017.03.12 16:08:07 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 40 -> romotec matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: Starting demodulation at Position 16 2017.03.12 16:08:07 5: sduino: dispatching bits: 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 2017.03.12 16:08:07 4: sduino: decoded matched MU Protocol id 40 dmsg u40#0040 length 16 2017.03.12 16:08:07 5: sduino: converted Data to (u40#0040) 2017.03.12 16:08:07 5: Starting notify loop for sduino, 1 event(s), first is opened 2017.03.12 16:08:07 5: End notify loop for sduino 2017.03.12 16:08:07 5: sduino: dispatch u40#0040 2017.03.12 16:08:07 5: Loading ./FHEM/90_SIGNALduino_un.pm 2017.03.12 16:08:07 4: SIGNALduino_unknown incomming msg: u40#0040 2017.03.12 16:08:07 4: SIGNALduino_unknown rawData: 0040 2017.03.12 16:08:07 4: SIGNALduino_unknown Protocol: 40 2017.03.12 16:08:07 4: SIGNALduino_unknown converted to bits: 0000000001000000 2017.03.12 16:08:07 4: Unknown, please report 2017.03.12 16:08:07 5: Starting notify loop for sduino, 1 event(s), first is UNKNOWNCODE u40#0040 2017.03.12 16:08:07 5: End notify loop for sduino 2017.03.12 16:08:07 3: sduino: Unknown code u40#0040, help me! 2017.03.12 16:08:07 5: sduino: dispatching bits: 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 2017.03.12 16:08:07 4: sduino: decoded matched MU Protocol id 40 dmsg u40#0040 length 16 2017.03.12 16:08:07 5: sduino: converted Data to (u40#0040) 2017.03.12 16:08:07 4: sduino: Dropped (u40#0040) due to short time or equal msg 2017.03.12 16:08:07 5: sduino: dispatching bits: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2017.03.12 16:08:07 4: sduino: decoded matched MU Protocol id 40 dmsg u40#00000000 length 32 2017.03.12 16:08:07 5: sduino: converted Data to (u40#00000000) 2017.03.12 16:08:07 5: Starting notify loop for sduino, 1 event(s), first is opened 2017.03.12 16:08:07 5: End notify loop for sduino 2017.03.12 16:08:07 5: sduino: dispatch u40#00000000 2017.03.12 16:08:07 4: SIGNALduino_unknown incomming msg: u40#00000000 2017.03.12 16:08:07 4: SIGNALduino_unknown rawData: 00000000 2017.03.12 16:08:07 4: SIGNALduino_unknown Protocol: 40 2017.03.12 16:08:07 4: SIGNALduino_unknown converted to bits: 00000000000000000000000000000000 2017.03.12 16:08:07 4: Unknown, please report 2017.03.12 16:08:07 5: Starting notify loop for sduino, 1 event(s), first is UNKNOWNCODE u40#00000000 2017.03.12 16:08:07 5: End notify loop for sduino 2017.03.12 16:08:07 3: sduino: Unknown code u40#00000000, help me! 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 49 -> quigg_gt9000 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: start pattern for MU Protocol id 49 -> quigg_gt9000 mismatches, aborting 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: Starting demodulation at Position 4 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 60 -> WS7000 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: Starting demodulation at Position 0 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: Starting demodulation at Position 6 2017.03.12 16:08:07 4: sduino: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate 2017.03.12 16:08:07 5: sduino: Starting demodulation at Position 4 2017.03.12 16:08:07 4: sduino/msg READ: MC;LL=-1025;LH=926;SL=-540;SH=436;D=A8C4765DC;C=487;L=34; 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 52 clock 487 -> OS_PIR 2017.03.12 16:08:07 5: sduino: extracted data 010101110011101110001001101000100011 (bin) 2017.03.12 16:08:07 4: sduino/msg READ: MC;LL=-1035;LH=917;SL=-546;SH=428;D=FE0BFF82FFFFFFFF6BA6D4;C=487;L=86; 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 10 clock 487 -> OSV2o3 2017.03.12 16:08:07 5: sduino: extracted data 0000000111110100000000000111110100000000000000000000000000000000100101000101100100101011 (bin) 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 12 clock 487 -> Hideki protocol 2017.03.12 16:08:07 5: sduino: extracted data 0000000111110100000000000111110100000000000000000000000000000000100101000101100100101011 (bin) 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 52 clock 487 -> OS_PIR 2017.03.12 16:08:07 5: sduino: extracted data 0000000111110100000000000111110100000000000000000000000000000000100101000101100100101011 (bin) 2017.03.12 16:08:07 4: sduino: Oregon PIR protocol detected: header_pos = 64 2017.03.12 16:08:07 5: sduino: converted Data to (u52#01F4007D0000000094592B) 2017.03.12 16:08:07 5: Starting notify loop for sduino, 1 event(s), first is opened 2017.03.12 16:08:07 5: End notify loop for sduino 2017.03.12 16:08:07 5: sduino: dispatch u52#01F4007D0000000094592B 2017.03.12 16:08:07 4: SIGNALduino_unknown incomming msg: u52#01F4007D0000000094592B 2017.03.12 16:08:07 4: SIGNALduino_unknown rawData: 01F4007D0000000094592B 2017.03.12 16:08:07 4: SIGNALduino_unknown Protocol: 52 2017.03.12 16:08:07 4: SIGNALduino_unknown converted to bits: 0000000111110100000000000111110100000000000000000000000000000000100101000101100100101011 2017.03.12 16:08:07 4: Unknown, please report 2017.03.12 16:08:07 5: Starting notify loop for sduino, 1 event(s), first is UNKNOWNCODE u52#01F4007D0000000094592B 2017.03.12 16:08:07 5: End notify loop for sduino 2017.03.12 16:08:07 3: sduino: Unknown code u52#01F4007D0000000094592B, help me! 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 58 clock 487 -> tfa 30.3208.0 2017.03.12 16:08:07 5: sduino: extracted data 0000000111110100000000000111110100000000000000000000000000000000100101000101100100101011 (bin) 2017.03.12 16:08:07 5: TRX/RAW: / 2017.03.12 16:08:07 5: TRX: TRX_Read '10' 2017.03.12 16:08:07 5: TRX_Read END 2017.03.12 16:08:07 5: TRX/RAW: /V▒C▒▒y 2017.03.12 16:08:07 5: TRX: TRX_Read '10560400991600430000000000c800c879' 2017.03.12 16:08:07 5: TRX_Read rmsg '10560400991600430000000000c800c879' 2017.03.12 16:08:07 5: TRX_Read TRX_data '10560400991600430000000000c800c879' 2017.03.12 16:08:07 5: TRX_Parse() '10560400991600430000000000c800c879' 2017.03.12 16:08:07 5: myRFX: dispatch 10560400991600430000000000c800c879 2017.03.12 16:08:07 5: Loading ./FHEM/46_TRX_WEATHER.pm 2017.03.12 16:08:07 5: TRX_WEATHER: decoding delay=0 hex=10560400991600430000000000c800c879 2017.03.12 16:08:07 5: TRX_WEATHER: parsing sensor_id=56 message='10560400991600430000000000c800c879' 2017.03.12 16:08:07 3: TRX_WEATHER: Unknown device TFA_WIND_22, please define it 2017.03.12 16:08:07 5: Starting notify loop for global, 1 event(s), first is UNDEFINED TFA_WIND_22 TRX_WEATHER TFA_WIND_22 2017.03.12 16:08:07 2: autocreate: define TFA_WIND_22 TRX_WEATHER TFA_WIND_22 2017.03.12 16:08:07 2: autocreate: define FileLog_TFA_WIND_22 FileLog ./log/TFA_WIND_22-%Y.log TFA_WIND_22 2017.03.12 16:08:07 5: End notify loop for global 2017.03.12 16:08:07 5: TRX_Read END 2017.03.12 16:08:07 4: sduino/msg READ: MC;LL=-1032;LH=922;SL=-542;SH=432;D=A8C4765DDFFE0BFF82FFFFFFFF6BBC84;C=487;L=126; 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 10 clock 487 -> OSV2o3 2017.03.12 16:08:07 5: sduino: extracted data 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000000100101000100001101111011 (bin) 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 12 clock 487 -> Hideki protocol 2017.03.12 16:08:07 5: sduino: extracted data 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000000100101000100001101111011 (bin) 2017.03.12 16:08:07 4: sduino: hideki protocol converted to hex: 7577B24400BE00BE00000090117B01 with 127 bits, messagestart 1 2017.03.12 16:08:07 5: sduino: converted Data to (P12#7577B24400BE00BE00000090117B01) 2017.03.12 16:08:07 5: sduino: dispatch P12#7577B24400BE00BE00000090117B01 2017.03.12 16:08:07 5: Loading ./FHEM/14_Hideki.pm 2017.03.12 16:08:07 4: Hideki_Parse sduino incomming P12#7577B24400BE00BE00000090117B01 2017.03.12 16:08:07 4: Hideki_Parse SensorTyp = 12 decodedString = 7599d6cc00c200c2000000b0338d03 2017.03.12 16:08:07 4: sduino decoded Hideki protocol model=Hideki_12, sensor id=99, channel=4, bat=ok, temp=20, Wc=20, Ws=0.00, Wg=0, Wd=11, WdDeg=247.5, Wdtxt=WSW 2017.03.12 16:08:07 5: deviceCode: Hideki_12_4 2017.03.12 16:08:07 1: Hideki: UNDEFINED sensor 12 detected, code Hideki_12_4 2017.03.12 16:08:07 5: Starting notify loop for global, 1 event(s), first is UNDEFINED Hideki_12_4 Hideki Hideki_12_4 2017.03.12 16:08:07 5: createNotifyHash 2017.03.12 16:08:07 4: autocreate: received 1 event(s) for 'Hideki Hideki_12_4' during the last 180 seconds 2017.03.12 16:08:07 4: autocreate: ignoring event for 'Hideki Hideki_12_4': at least 2 needed 2017.03.12 16:08:07 5: End notify loop for global 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 52 clock 487 -> OS_PIR 2017.03.12 16:08:07 5: sduino: extracted data 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000000100101000100001101111011 (bin) 2017.03.12 16:08:07 4: sduino: Oregon PIR protocol detected: header_pos = 104 2017.03.12 16:08:07 5: sduino: converted Data to (u52#573B89A22001F4007D0000000094437B) 2017.03.12 16:08:07 5: Starting notify loop for sduino, 1 event(s), first is opened 2017.03.12 16:08:07 5: End notify loop for sduino 2017.03.12 16:08:07 5: sduino: dispatch u52#573B89A22001F4007D0000000094437B 2017.03.12 16:08:07 4: SIGNALduino_unknown incomming msg: u52#573B89A22001F4007D0000000094437B 2017.03.12 16:08:07 4: SIGNALduino_unknown rawData: 573B89A22001F4007D0000000094437B 2017.03.12 16:08:07 4: SIGNALduino_unknown Protocol: 52 2017.03.12 16:08:07 4: SIGNALduino_unknown converted to bits: 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000000100101000100001101111011 2017.03.12 16:08:07 4: Unknown, please report 2017.03.12 16:08:07 5: Starting notify loop for sduino, 1 event(s), first is UNKNOWNCODE u52#573B89A22001F4007D0000000094437B 2017.03.12 16:08:07 5: End notify loop for sduino 2017.03.12 16:08:07 3: sduino: Unknown code u52#573B89A22001F4007D0000000094437B, help me! 2017.03.12 16:08:07 4: sduino: Found manchester Protocol id 58 clock 487 -> tfa 30.3208.0 2017.03.12 16:08:07 5: sduino: extracted data 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000000100101000100001101111011 (bin) 2017.03.12 16:08:31 4: sduino/msg READ: MU;P0=450;P1=-1007;P2=1432;D=01012121212121212101012101010121012121010121012101012121012101212121010101210121212121212;CP=0; 2017.03.12 16:08:31 5: sduino: applying filterfunc SIGNALduino_filterSign 2017.03.12 16:08:31 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate 2017.03.12 16:08:31 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting 2017.03.12 16:08:31 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate 2017.03.12 16:08:31 5: sduino: Starting demodulation at Position 1 2017.03.12 16:08:31 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate 2017.03.12 16:08:31 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting 2017.03.12 16:08:31 5: sduino: applying filterfunc SIGNALduino_compPattern 2017.03.12 16:08:31 4: sduino: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate 2017.03.12 16:08:31 5: sduino: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting 2017.03.12 16:08:31 4: sduino: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate 2017.03.12 16:08:31 5: sduino: Starting demodulation at Position 0 2017.03.12 16:08:31 5: sduino: dispatching bits: 0 0 1 1 1 1 1 1 1 0 0 1 0 0 0 1 0 1 1 0 0 1 0 1 0 0 1 1 0 1 0 1 1 1 0 0 0 1 0 1 1 1 1 1 2017.03.12 16:08:31 4: sduino: decoded matched MU Protocol id 5 dmsg p5#3F916535C5F length 44 2017.03.12 16:08:31 4: sduino: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate 2017.03.12 16:08:31 5: sduino: Starting demodulation at Position 0 2017.03.12 16:08:31 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate 2017.03.12 16:08:31 5: sduino: Starting demodulation at Position 0 2017.03.12 16:08:31 5: sduino: dispatching bits: 1 1 0 0 0 0 0 0 0 1 1 0 1 1 1 0 1 0 0 1 1 0 1 0 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 0 0 2017.03.12 16:08:31 4: sduino: decoded matched MU Protocol id 8 dmsg TXC06E9ACA3A0 length 44 2017.03.12 16:08:31 5: sduino: converted Data to (TXC06E9ACA3A0) 2017.03.12 16:08:31 5: sduino: dispatch TXC06E9ACA3A0 2017.03.12 16:08:31 5: Loading ./FHEM/14_CUL_TX.pm 2017.03.12 16:08:31 4: CUL_TX 55 (XC06E9ACA3A0) data error 2017.03.12 16:08:31 4: sduino: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate 2017.03.12 16:08:31 5: sduino: Starting demodulation at Position 0 2017.03.12 16:08:35 4: Connection closed for WEB_192.168.13.52_52601: EOF 2017.03.12 16:08:35 4: WEB_192.168.13.52_52602 GET /fhem?; BUFLEN:0 2017.03.12 16:08:35 4: WEB: /fhem? / RL:1326 / text/html; charset=UTF-8 / Content-Encoding: gzip / 2017.03.12 16:08:35 4: WEB_192.168.13.52_52602 GET /fhem?XHR=1&inform=type=status;filter=;since=1489331314;fmt=JSON&fw_id=28×tamp=1489331327030; BUFLEN:0 2017.03.12 16:08:37 4: Connection closed for WEB_192.168.13.52_52602: EOF 2017.03.12 16:08:37 4: Connection accepted from WEB_192.168.13.52_52603 2017.03.12 16:08:37 4: WEB_192.168.13.52_52603 GET /fhem?room=all; BUFLEN:0 2017.03.12 16:08:37 4: WEB: /fhem?room=all / RL:1785 / text/html; charset=UTF-8 / Content-Encoding: gzip / 2017.03.12 16:08:37 4: WEB_192.168.13.52_52603 GET /fhem?XHR=1&inform=type=status;filter=room=all;since=1489331316;fmt=JSON&fw_id=31×tamp=1489331329048; BUFLEN:0 2017.03.12 16:08:40 5: TRX/RAW: /V 2017.03.12 16:08:40 5: TRX: TRX_Read '10560401' 2017.03.12 16:08:40 5: TRX_Read END 2017.03.12 16:08:40 5: TRX/RAW: V/▒p 2017.03.12 16:08:40 5: TRX: TRX_Read '1056040199160070' 2017.03.12 16:08:40 5: TRX_Read END 2017.03.12 16:08:40 5: TRX/RAW: V▒p/ 2017.03.12 16:08:40 5: TRX: TRX_Read '105604019916007000000000' 2017.03.12 16:08:40 5: TRX_Read END 2017.03.12 16:08:40 5: TRX/RAW: V▒p/▒ 2017.03.12 16:08:40 5: TRX: TRX_Read '10560401991600700000000000c800' 2017.03.12 16:08:40 5: TRX_Read END 2017.03.12 16:08:40 5: TRX/RAW: V▒p▒/▒y 2017.03.12 16:08:40 5: TRX: TRX_Read '10560401991600700000000000c800c879' 2017.03.12 16:08:40 5: TRX_Read rmsg '10560401991600700000000000c800c879' 2017.03.12 16:08:40 5: TRX_Read TRX_data '10560401991600700000000000c800c879' 2017.03.12 16:08:40 5: TRX_Parse() '10560401991600700000000000c800c879' 2017.03.12 16:08:40 5: myRFX: dispatch 10560401991600700000000000c800c879 2017.03.12 16:08:40 5: TRX_WEATHER: decoding delay=33 hex=10560401991600700000000000c800c879 2017.03.12 16:08:40 5: TRX_WEATHER: parsing sensor_id=56 message='10560401991600700000000000c800c879' 2017.03.12 16:08:40 5: TRX_WEATHER: name=TFA_WIND_22 device=TFA_WIND_22 Temperatur 20 Grad Celsius 2017.03.12 16:08:40 5: TRX_WEATHER: name=TFA_WIND_22 device=TFA_WIND_22 windchill 20 Grad Celsius 2017.03.12 16:08:40 5: TRX_WEATHER: name=TFA_WIND_22 device=TFA_WIND_22 wind_speed 0 wind_avspeed 0 2017.03.12 16:08:40 5: TRX_WEATHER: name=TFA_WIND_22 device=TFA_WIND_22 wind_dir 112 ESE 2017.03.12 16:08:40 5: TRX_WEATHER: name=TFA_WIND_22 device=TFA_WIND_22 Batterie ok 100% 2017.03.12 16:08:40 5: Starting notify loop for TFA_WIND_22, 7 event(s), first is temperature: 20 2017.03.12 16:08:40 5: createNotifyHash 2017.03.12 16:08:40 5: End notify loop for TFA_WIND_22 2017.03.12 16:08:40 5: TRX_Read END 2017.03.12 16:08:40 4: sduino/msg READ: MC;LL=-1040;LH=915;SL=-555;SH=410;D=54623B2EE7FF05FFC17FFFFFFE2D178E;C=486;L=127; 2017.03.12 16:08:40 4: sduino: Found manchester Protocol id 10 clock 486 -> OSV2o3 2017.03.12 16:08:40 5: sduino: extracted data 10101011100111011100010011010001000110000000000011111010000000000011111010000000000000000000000000000001110100101110100001110001 (bin) 2017.03.12 16:08:40 4: sduino: Found manchester Protocol id 12 clock 486 -> Hideki protocol 2017.03.12 16:08:40 5: sduino: extracted data 10101011100111011100010011010001000110000000000011111010000000000011111010000000000000000000000000000001110100101110100001110001 (bin) 2017.03.12 16:08:40 4: sduino: hideki protocol converted to hex: 7577B2C400BE00BE0000005C5D1C with 126 bits, messagestart 2 2017.03.12 16:08:40 5: sduino: converted Data to (P12#7577B2C400BE00BE0000005C5D1C) 2017.03.12 16:08:40 5: sduino: dispatch P12#7577B2C400BE00BE0000005C5D1C 2017.03.12 16:08:40 4: Hideki_Parse sduino incomming P12#7577B2C400BE00BE0000005C5D1C 2017.03.12 16:08:40 4: Hideki_Parse SensorTyp = 12 decodedString = 7599d64c00c200c2000000e4e724 2017.03.12 16:08:40 4: sduino decoded Hideki protocol model=Hideki_12, sensor id=99, channel=4, bat=ok, temp=20, Wc=20, Ws=0.00, Wg=0, Wd=14, WdDeg=315, Wdtxt=NW 2017.03.12 16:08:40 5: deviceCode: Hideki_12_4 2017.03.12 16:08:40 1: Hideki: UNDEFINED sensor 12 detected, code Hideki_12_4 2017.03.12 16:08:40 5: Starting notify loop for global, 1 event(s), first is UNDEFINED Hideki_12_4 Hideki Hideki_12_4 2017.03.12 16:08:40 4: autocreate: received 2 event(s) for 'Hideki Hideki_12_4' during the last 180 seconds 2017.03.12 16:08:40 2: autocreate: define Hideki_12_4 Hideki Hideki_12_4 2017.03.12 16:08:40 2: autocreate: define FileLog_Hideki_12_4 FileLog ./log/Hideki_12_4-%Y.log Hideki_12_4 2017.03.12 16:08:40 2: autocreate: define SVG_Hideki_12_4 SVG FileLog_Hideki_12_4:temp4hum4:CURRENT 2017.03.12 16:08:40 5: Loading ./FHEM/98_SVG.pm 2017.03.12 16:08:40 5: Starting notify loop for SVG_Hideki_12_4, 1 event(s), first is copyGplotFile 2017.03.12 16:08:40 5: createNotifyHash 2017.03.12 16:08:40 5: End notify loop for SVG_Hideki_12_4 2017.03.12 16:08:40 5: End notify loop for global 2017.03.12 16:08:40 4: sduino: Found manchester Protocol id 52 clock 486 -> OS_PIR 2017.03.12 16:08:40 5: sduino: extracted data 10101011100111011100010011010001000110000000000011111010000000000011111010000000000000000000000000000001110100101110100001110001 (bin) 2017.03.12 16:08:40 4: sduino: Oregon PIR protocol detected: header_pos = 103 2017.03.12 16:08:40 5: sduino: converted Data to (u52#AB9DC4D11800FA003E80000001D2E871) 2017.03.12 16:08:40 5: Starting notify loop for sduino, 1 event(s), first is opened 2017.03.12 16:08:40 5: End notify loop for sduino 2017.03.12 16:08:40 5: sduino: dispatch u52#AB9DC4D11800FA003E80000001D2E871 2017.03.12 16:08:40 4: SIGNALduino_unknown incomming msg: u52#AB9DC4D11800FA003E80000001D2E871 2017.03.12 16:08:40 4: SIGNALduino_unknown rawData: AB9DC4D11800FA003E80000001D2E871 2017.03.12 16:08:40 4: SIGNALduino_unknown Protocol: 52 2017.03.12 16:08:40 4: SIGNALduino_unknown converted to bits: 10101011100111011100010011010001000110000000000011111010000000000011111010000000000000000000000000000001110100101110100001110001 2017.03.12 16:08:40 4: Unknown, please report 2017.03.12 16:08:40 5: Starting notify loop for sduino, 1 event(s), first is UNKNOWNCODE u52#AB9DC4D11800FA003E80000001D2E871 2017.03.12 16:08:40 5: End notify loop for sduino 2017.03.12 16:08:40 3: sduino: Unknown code u52#AB9DC4D11800FA003E80000001D2E871, help me! 2017.03.12 16:08:40 4: sduino: Found manchester Protocol id 58 clock 486 -> tfa 30.3208.0 2017.03.12 16:08:40 5: sduino: extracted data 10101011100111011100010011010001000110000000000011111010000000000011111010000000000000000000000000000001110100101110100001110001 (bin) 2017.03.12 16:08:40 4: sduino/msg READ: MC;LL=-1028;LH=922;SL=-540;SH=436;D=A8C4765DEFFE0BFF82FFFFFFFC5A3C64;C=487;L=126; 2017.03.12 16:08:40 4: sduino: Found manchester Protocol id 10 clock 487 -> OSV2o3 2017.03.12 16:08:40 5: sduino: extracted data 01010111001110111000100110100010000100000000000111110100000000000111110100000000000000000000000000000011101001011100001110011011 (bin) 2017.03.12 16:08:40 4: sduino: Found manchester Protocol id 12 clock 487 -> Hideki protocol 2017.03.12 16:08:40 5: sduino: extracted data 01010111001110111000100110100010000100000000000111110100000000000111110100000000000000000000000000000011101001011100001110011011 (bin) 2017.03.12 16:08:40 4: sduino: hideki protocol converted to hex: 7577B28400BE00BE0000005C1D6701 with 127 bits, messagestart 1 2017.03.12 16:08:40 5: sduino: converted Data to (P12#7577B28400BE00BE0000005C1D6701) 2017.03.12 16:08:40 5: sduino: dispatch P12#7577B28400BE00BE0000005C1D6701 2017.03.12 16:08:40 4: Hideki_Parse sduino incomming P12#7577B28400BE00BE0000005C1D6701 2017.03.12 16:08:40 4: Hideki_Parse SensorTyp = 12 decodedString = 7599d68c00c200c2000000e427a903 2017.03.12 16:08:40 4: sduino decoded Hideki protocol model=Hideki_12, sensor id=99, channel=4, bat=ok, temp=20, Wc=20, Ws=0.00, Wg=0, Wd=14, WdDeg=315, Wdtxt=NW 2017.03.12 16:08:40 5: deviceCode: Hideki_12_4 2017.03.12 16:08:40 5: Starting notify loop for Hideki_12_4, 10 event(s), first is T: 20 Ws: 0.00 Wg: 0 Wd: NW 2017.03.12 16:08:40 5: createNotifyHash 2017.03.12 16:08:40 5: End notify loop for Hideki_12_4 2017.03.12 16:08:40 4: sduino: Found manchester Protocol id 52 clock 487 -> OS_PIR 2017.03.12 16:08:40 5: sduino: extracted data 01010111001110111000100110100010000100000000000111110100000000000111110100000000000000000000000000000011101001011100001110011011 (bin) 2017.03.12 16:08:40 4: sduino: Oregon PIR protocol detected: header_pos = 102 2017.03.12 16:08:40 5: sduino: converted Data to (u52#573B89A21001F4007D00000003A5C39B) 2017.03.12 16:08:40 5: Starting notify loop for sduino, 1 event(s), first is opened 2017.03.12 16:08:40 5: End notify loop for sduino 2017.03.12 16:08:40 5: sduino: dispatch u52#573B89A21001F4007D00000003A5C39B 2017.03.12 16:08:40 4: SIGNALduino_unknown incomming msg: u52#573B89A21001F4007D00000003A5C39B 2017.03.12 16:08:40 4: SIGNALduino_unknown rawData: 573B89A21001F4007D00000003A5C39B 2017.03.12 16:08:40 4: SIGNALduino_unknown Protocol: 52 2017.03.12 16:08:40 4: SIGNALduino_unknown converted to bits: 01010111001110111000100110100010000100000000000111110100000000000111110100000000000000000000000000000011101001011100001110011011 2017.03.12 16:08:40 4: Unknown, please report 2017.03.12 16:08:40 5: Starting notify loop for sduino, 1 event(s), first is UNKNOWNCODE u52#573B89A21001F4007D00000003A5C39B 2017.03.12 16:08:40 5: End notify loop for sduino 2017.03.12 16:08:40 3: sduino: Unknown code u52#573B89A21001F4007D00000003A5C39B, help me! 2017.03.12 16:08:40 4: sduino: Found manchester Protocol id 58 clock 487 -> tfa 30.3208.0 2017.03.12 16:08:40 5: sduino: extracted data 01010111001110111000100110100010000100000000000111110100000000000111110100000000000000000000000000000011101001011100001110011011 (bin) 2017.03.12 16:08:41 4: sduino/msg READ: MC;LL=-1020;LH=933;SL=-531;SH=445;D=A8C4765DDFFE0BFF82FFFFFFFC5A2634;C=488;L=126; 2017.03.12 16:08:41 4: sduino: Found manchester Protocol id 10 clock 488 -> OSV2o3 2017.03.12 16:08:41 5: sduino: extracted data 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000011101001011101100111001011 (bin) 2017.03.12 16:08:41 4: sduino: Found manchester Protocol id 12 clock 488 -> Hideki protocol 2017.03.12 16:08:41 5: sduino: extracted data 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000011101001011101100111001011 (bin) 2017.03.12 16:08:41 4: sduino: hideki protocol converted to hex: 7577B24400BE00BE0000005CDD4E01 with 127 bits, messagestart 1 2017.03.12 16:08:41 5: sduino: converted Data to (P12#7577B24400BE00BE0000005CDD4E01) 2017.03.12 16:08:41 5: sduino: dispatch P12#7577B24400BE00BE0000005CDD4E01 2017.03.12 16:08:41 4: Hideki_Parse sduino incomming P12#7577B24400BE00BE0000005CDD4E01 2017.03.12 16:08:41 4: Hideki_Parse SensorTyp = 12 decodedString = 7599d6cc00c200c2000000e467d203 2017.03.12 16:08:41 4: sduino decoded Hideki protocol model=Hideki_12, sensor id=99, channel=4, bat=ok, temp=20, Wc=20, Ws=0.00, Wg=0, Wd=14, WdDeg=315, Wdtxt=NW 2017.03.12 16:08:41 5: deviceCode: Hideki_12_4 2017.03.12 16:08:41 4: sduino: Found manchester Protocol id 52 clock 488 -> OS_PIR 2017.03.12 16:08:41 5: sduino: extracted data 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000011101001011101100111001011 (bin) 2017.03.12 16:08:41 4: sduino: Oregon PIR protocol detected: header_pos = 102 2017.03.12 16:08:41 5: sduino: converted Data to (u52#573B89A22001F4007D00000003A5D9CB) 2017.03.12 16:08:41 5: Starting notify loop for sduino, 1 event(s), first is opened 2017.03.12 16:08:41 5: End notify loop for sduino 2017.03.12 16:08:41 5: sduino: dispatch u52#573B89A22001F4007D00000003A5D9CB 2017.03.12 16:08:41 4: SIGNALduino_unknown incomming msg: u52#573B89A22001F4007D00000003A5D9CB 2017.03.12 16:08:41 4: SIGNALduino_unknown rawData: 573B89A22001F4007D00000003A5D9CB 2017.03.12 16:08:41 4: SIGNALduino_unknown Protocol: 52 2017.03.12 16:08:41 4: SIGNALduino_unknown converted to bits: 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000011101001011101100111001011 2017.03.12 16:08:41 4: Unknown, please report 2017.03.12 16:08:41 5: Starting notify loop for sduino, 1 event(s), first is UNKNOWNCODE u52#573B89A22001F4007D00000003A5D9CB 2017.03.12 16:08:41 5: End notify loop for sduino 2017.03.12 16:08:41 3: sduino: Unknown code u52#573B89A22001F4007D00000003A5D9CB, help me! 2017.03.12 16:08:41 4: sduino: Found manchester Protocol id 58 clock 488 -> tfa 30.3208.0 2017.03.12 16:08:41 5: sduino: extracted data 01010111001110111000100110100010001000000000000111110100000000000111110100000000000000000000000000000011101001011101100111001011 (bin)
Als was wird der Sensor im rflink erkannt? Das Modul TRX legt via TRX_WEATHER das Device TFA_WIND_22 an.
Ok, sorry, Leser sind klar im Vorteil ;-) Hab meinen RFlink leider nicht zum Laufen bekommen. Hat beim Firmware flashen zwar OK angezeit, ging aber nicht, beim 2 Durchlauf konnte er nicht mehr auf den Mega zugreifen :-( Scheinbar zu Tode geflasht
Hallo Tbone,
werden die Daten von Deinem TFA Windmesser inzwischen in fhem angezeigt?
Bei noxx besteht das Problem, daß beim Wind viel zu hohe Werte angezeigt werden. Hast Du ähnliche Erfahrungen gemacht?
Durch lesen hier im Forum, soll das angeblich m/s sein, was FHEM anzeigt.
Ich lese hier teilweise Werte von 52 (52 m/s -> 187 km/h ? ) während die Basis Werte knapp
über 10 km/h anzeigt.
https://forum.fhem.de/index.php/topic,58397.msg644436.html#msg644436
Hier hat sich schon lange nichts mehr getan. Ich schließe das Issue. Bitte wieder öffnen, wenn es noch benötigt wird.
Servus. Nachdem ich in der Protokollliste zwar meinen Senor nicht gefunden, aber Hideki hinterlegt gesehen habe, dachte ich, es würde schon gehen und habe mir diesen Windmesser zugelegt. Nun bin ich nach einiger Suche etwas schlauer.
TFA Windmesser 30.3168 solar <- habe ich TFA Windmesser 30.3149 (Batterie) dürfte bis auf das fehlende Solarpanel bau- und funktionsgleich sein.
Zu empfangen sind diese Sensoren z.B. via der TFA Funkwettersation Nexus 35.1075.
Bisher weis ich folgendes: RF Funkübertragungsfrequenz 433.92 MHz Protokoll: Hideki laut RFXtrx Hadbuch Seite12
Daten direkt vom SIGNAduino: V 3.3.0 SIGNALduino - compiled at Sep 18 2016 00:28:28
normal operation MC;LL=-1052;LH=908;SL=-563;SH=405;D=A8CFB65DCC3E0B0F82FFFFFFFFED8CF4;C=487;L=126; MC;LL=-1025;LH=924;SL=-540;SH=437;D=A8CFB65DEC3E0B0F82FFFFFFFFEA9ECC;C=487;L=126; MC;LL=-1017;LH=934;SL=-533;SH=443;D=A8CFB65DDC3E0B0F82FFFFFFFFEA849C;C=487;L=126; MC;LL=-1046;LH=915;SL=-563;SH=407;D=A33ED97720F8283E0BFFFFFFFFAA3D3;C=488;L=124; MC;LL=-1024;LH=927;SL=-535;SH=442;D=A8CFB65DE83E0A0F82FFFFFFFFEA9C34;C=487;L=126; MC;LL=-1016;LH=936;SL=-528;SH=448;D=A8CFB65DD83E0A0F82FFFFFFFFEA8664;C=487;L=126; MC;LL=-1034;LH=931;SL=-559;SH=416;D=A33ED9773F182FC60B01F3E7F0A5D01;C=489;L=124; MC;LL=-1022;LH=930;SL=-533;SH=443;D=A8CFB65DEFC60BF182C07CF9FC29677C;C=487;L=126; MC;LL=-1010;LH=945;SL=-524;SH=452;D=A8CFB65DDFC60BF182C07CF9FC297D2C;C=488;L=126;
MC;LL=-1023;LH=928;SL=-536;SH=440;D=A8E8765DC;C=487;L=34; MC;LL=-1024;LH=929;SL=-539;SH=438;D=7BA05EE817FFFFFFFD7234A;C=488;L=91; MC;LL=-1020;LH=933;SL=-533;SH=443;D=A8E8765DDF740BDD02FFFFFFFFAE5CC4;C=488;L=126;
Button pressed MU;P0=-610;P1=860;P2=-1089;P3=370;D=012103032303012103030323030123010321230301230301032303030123030121030303030321230303012303012103030303032121210303030303230303030303030121230303030103230303010323012303030121230303010321032303;CP=3; MC;LL=-1025;LH=926;SL=-538;SH=441;D=A8E8765DEF740BDD02A07FAF9E6F4D34;C=488;L=126; MC;LL=-1019;LH=936;SL=-530;SH=444;D=A8E8765DDF740BDD02A07FAF9E6F5764;C=488;L=126;
Button pressed MU;P0=184;P1=-124;P3=860;P4=-1091;P5=-617;P6=366;D=01013434356564656534356565646565346535643465653465653564656565346565343565656565643465656534656534356565656564343435656565656465656565656565656565656565656565656565653564656534343565656564653435656565646;CP=6; MC;LL=-1027;LH=930;SL=-539;SH=438;D=A8E8765DFBA05EE81503FFFFE750F3E;C=488;L=123; MC;LL=-1018;LH=933;SL=-533;SH=444;D=A8E8765DDF740BDD02A07FFFFCEA042C;C=487;L=126;
Welche Daten kann ich noch liefern, um zu helfen, auch diesen Sensor zu interpretieren?
Greetings, Tbone