02-tests/task 02 Release 2016.07 - RC1

[BytesGalore]

Task # 02

Perform a subset of tests on iotlab-m3 node:

• [x] bitarithm_timings
• [ ] bloom_bytes
• [ ] coap
• [x] conn_ip sent 3 pings out (ping6)
• [ ] cpp11_condition_variable
• [ ] cpp11_mutex
• [x] cpp11_thread
• [ ] driver_adt7310
• [ ] driver_at30tse75x
• [x] driver_at86rf2xx
• [ ] driver_bh1750
• [ ] driver_bmp180
• [x] driver_dht -> results in expected behaviour: gets stuck at dht_read(dev, &temp, &hum), since no DHT 11/22 temperature and humidity sensor is attached
• [ ] driver_enc28j60
• [ ] driver_encx24j600
• [x] driver_hdc1000 -> results in expected behaviour: Initializing HDC1000 sensor at I2C_0... [Failed]
• [ ] driver_hih6130
• [ ] driver_ina220
• [x] driver_isl29020
• [ ] driver_isl29125
• [ ] driver_kw2xrf
• [x] driver_l3g4200d
• [ ] driver_lis3dh
• [ ] driver_lis3mdl
• [x] driver_lps331ap
• [ ] driver_lsm303dlhc
• [ ] driver_mag3110
• [x] driver_mma8652 -> results in expected behaviour: Initializing MMA8652 accelerometer at I2C_0... [Failed]
• [ ] driver_mpl3115a2
• [ ] driver_mpu9150
• [x] driver_mq3
• [ ] driver_nrf24l01p_lowlevel
• [ ] driver_nrfmin
• [x] driver_nvram_spi -> results in expected behaviour: Verifying contents... [Failed]
• [ ] driver_pcd8544
• [ ] driver_pir
• [x] driver_servo
• [ ] driver_si70xx
• [ ] driver_srf02
• [x] driver_srf08 -> results in expected behaviour: no values are printed, since no SRF08 ultrasonic sensor is attached
• [ ] driver_tcs37727
• [ ] driver_tmp006
• [x] driver_xbee -> results in expected behaviour: the device cannot be configured, since no xbee shield is attached
• [ ] emb6
• [ ] fault_handler
• [x] float -> only shows/spams - on the screen
• [ ] fmt_print
• [ ] gnrc_ipv6_ext
• [x] gnrc_sixlowpan
• [ ] irq
• [ ] leds
• [x] libfixmath
• [ ] lwip
• [ ] malloc
• [x] minimal
• [ ] msg_send_receive
• [ ] msg_try_receive
• [x] mutex_order
• [ ] mutex_unlock_and_sleep
• [ ] netdev2_test
• [x] netstats_l2
• [ ] nhdp
• [ ] periph_adc
• [x] periph_cpuid
• [ ] periph_dac
• [ ] periph_gpio
• [x] periph_hwrng
• [ ] periph_i2c
• [ ] periph_pwm
• [x] periph_rtc
• [ ] periph_rtt
• [ ] periph_spi
• [x] periph_timer
• [ ] periph_uart
• [ ] pipe
• [x] pkg_cmsis-dsp
• [ ] pkg_jsmn
• [ ] pkg_micro-ecc
• [x] pkg_u8g2
• [ ] posix_semaphore
• [ ] posix_sleep
• [x] pthread
• [ ] pthread_barrier
• [ ] pthread_cleanup
• [x] pthread_condition_variable
• [ ] pthread_cooperation
• [ ] pthread_rwlock
• [x] pthread_tls
• [ ] saul
• [ ] sched_testing
• [x] shell
• [ ] sizeof_tcb
• [ ] slip
• [x] struct_tm_utility
• [ ] thread_basic
• [ ] thread_cooperation
• [x] thread_exit
• [ ] thread_flags
• [ ] thread_flood
• [x] thread_msg
• [ ] thread_msg_avail
• [ ] thread_msg_block_wo_queue
• [x] thread_msg_block_w_queue
• [ ] thread_msg_seq
• [ ] warn_conflict
• [x] xtimer_drift -> I ran it for a handful minutes: max drift/jitter is about +-35 us (these high values occured ~ 4 times a min)
• [ ] xtimer_hang
• [ ] xtimer_longterm
• [x] xtimer_msg
• [ ] xtimer_msg_receive_timeout
• [ ] xtimer_now64_continuity
• [x] xtimer_remove
• [ ] xtimer_reset
• [ ] xtimer_usleep_until
• [x] zep

list made manually by executing:

ls -1a | sed  -e 's/^/- [ ] /'

in RIOT/tests and removing unittests et al. from the list

[BytesGalore]

tests performed on: https://github.com/RIOT-OS/RIOT/commit/b5cb68bd6673abe02166f8af7782aa2745ca08cd with: gcc version 5.3.1 20160307 (release) [ARM/embedded-5-branch revision 234589] (GNU Tools for ARM Embedded Processors)