search

ROBOTIS-GIT / turtlebot3_autorace

Autonomous Driving with TurtleBot3
http://turtlebot3.robotis.com
Apache License 2.0
88 stars 50 forks source link

getting error while lane detection part of autorace drive 2020 using gazebo simulation. #59

Open mariyajose440 opened 2 months ago

mariyajose440 commented 2 months ago

Hi, I am following https://emanual.robotis.com/docs/en/platform/turtlebot3/autonomous_driving/ this page for learning turtle bot3 with ROS. after setting up intrinsic and extrinsic camera ,I started lane detection part. and I ran roslaunch turtlebot3_autorace_driving turtlebot3_autorace_control_lane.launch command,it's giving error. I placed robot in the middle of yellow and white line . and it's moved very well till it reached the round.when reached the round in the map ,robot got confused and moved wrongly.

map : image

error: image

If you know the solution to this problem, plz let me know. Thanks

shiba-8ro commented 2 months ago

@mariyajose440 I can't solve your problem, but I can advise you to write your question according to their issue template to increase your chances of getting an answer from them.

ISSUE TEMPLATE ver. 0.4.0

1. Which TurtleBot3 platform do you use?

    - [ ] Burger
    - [ ] Waffle
    - [ ] Waffle Pi

2. Which ROS is working with TurtleBot3?

    - [ ] ROS 1 Kinetic Kame
    - [ ] ROS 1 Melodic Morenia
    - [ ] ROS 1 Noetic Ninjemys
    - [ ] ROS 2 Dashing Diademata
    - [ ] ROS 2 Eloquent Elusor
    - [ ] ROS 2 Foxy Fitzroy
    - [ ] etc (Please specify your ROS Version here)

3. Which SBC(Single Board Computer) is working on TurtleBot3?

    - [ ] Intel Joule 570x
    - [ ] Raspberry Pi 3B+
    - [ ] Raspberry Pi 4
    - [ ] etc (Please specify your SBC here)

4. Which OS you installed on SBC?

    - [ ] Raspbian distributed by ROBOTIS
    - [ ] Ubuntu MATE (16.04/18.04/20.04)
    - [ ] Ubuntu preinstalled server (18.04/20.04)
    - [ ] etc (Please specify your OS here)

5. Which OS you installed on Remote PC?

    - [ ] Ubuntu 16.04 LTS (Xenial Xerus)
    - [ ] Ubuntu 18.04 LTS (Bionic Beaver)
    - [ ] Ubuntu 20.04 LTS (Focal Fossa)
    - [ ] Windows 10
    - [ ] MAC OS X (Specify version)
    - [ ] etc (Please specify your OS here)

6. Specify the software and firmware version(Can be found from Bringup messages)

    - Software version: [x.x.x]
    - Firmware version: [x.x.x]

7. Specify the commands or instructions to reproduce the issue.

    - HERE

8. Copy and Paste the error messages on terminal.

    - HERE

9. Please describe the issue in detail.

    - HERE