RPCS3 save/load UI does dualshock 3 stop work " recognize input commands",

[Kojikun1]

Quick summary

RPCS3 save/load Ui does dualshock 3 stop work " recognize input commands",

Details

All games that use the save/load UI, make the controller stop work, the dualshock 3 remains connected and recognized in the emulator but the commands do not work, the games that have a own save ui and load automatically does not have this problem The Problem occurs with bluetooth and cable the dualshok 4 working fine.

ps : I using a original genuine sony dualshock 3 and Nefarius' DsHidMini driver with bluetooth.

for bypass this issue need to disconnect and reconnect a controller after the save loads

1. Please attach RPCS3's log.

Hatsune Miku project Diva F RPCS3.log.gz Nier Replicant Log RPCS3.log.gz

[Megamouse]

Before anyone will ever start looking into this, someone has to confirm if this also happens without the Nefarius driver.

[Megamouse]

Might be "fixed" by #10160 (Next update)

[Kojikun1]

@Megamouse unfortunately did not fix the problem

[Kojikun1]

RPCS3 v0.0.15-12130-3e33f064 Alpha RPCS3.log.gz

[HerrHulaHoop]

Try it wired instead of bluetooth. If that doesn't work, completely uninstall Nefarius' driver and try with the Sony driver (wired obviously).

[Kojikun1]

@HerrHulaHoop wired as the same problem with Nefarius' driver i will try with sony driver. i thinks is not a problem with the driver because other games works fine games that dont use the rpcs3 save ui.

[Kojikun1]

After disassembling and cleaning the dualshock 3, in addition to improving contacts, this fixed the problem. probably some problem in the dualshock, it was working correctly but something was causing this behavior