ps3 Dualshock3 not being read

[demolitiondoge]

for the last week my DualShock three has been working completely fine but during the last rpc3 update it didn't work. I know my controller still works because mmjoystick is still reading it. The only problem with using mmjoystick is the y axis is inverted on both joysticks.

i have a new 3080ti (only have had it for 3 months) on windows ten with a intel core i9 10850K cpu @ 3.60Ghz

[YuriNator557]

Support requests are to be done on Discord or the forums, not here The controller input code has not been changed in any of the builds in the last week

[Darkhost1999]

No log, no steps to reproduce, just a statement saying my dualshock 3 stopped working.

• How is the controller connected? Wired or wireless?

• Are you using RPCS3 native dualshock 3 handler?

• Are you using Nefarious's dshidmini? (If wireless) Do you have the latest BTHPS3 installed from the Nefarious DSHidmini installation guide?

• Are you using SCPToolkit? This is Legacy software and advised by the developer(s) that made scptoolkit not to use this software.

I can assume you're using wired and RPCS3's Dualshock 3 handler. But there isn't anything to confirm that steam isn't eating the inputs or anything else is interfering with the communication of the drivers.

[Megamouse]

Log file missing. I did change the code though 🫣

[MilkManEX]

Same issue, actually. Was working until 13745, update 13750 and after shows DS3 disconnected. Reverting to 13745 returns DS3 to normal function. Controller is wired using Sony drivers. Native handler.

E DS3: check_add_device: hid_get_feature_report 0x0 failed! result=62, buf[0]=0x0, error=Success x3 when refreshing handler on any revision after 13745. Log file attached RPCS3.log

Not sure if it matters, but I'm also attaching the log from build 13745 where the controller is working RPCS3.log .