Shutdown(Power off) fail issues

Some kernel panics prevent safe shutdown

without slash() dmesg | grep "[ cut here ]" -A 30

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.302+ (root@build8) (gcc version 12.2.0 (GCC) ) #69057 SMP Fri Jan 12 17:02:26 CST 2024 [ 0.000000] Command line: withefi earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 consoleblank=600 netif_num=2 pid=0x5591 earlycon=uart8250,io,0x3f8,115200n8 mac2=001132599e65 mac1=001132599e64 sn=2150SQRESF4NH modprobe.blacklist=evbug,cdc_ether pcie_aspm=off rootwait SMBusHddDynamicPower=1 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=1 skip_vender_mac_interfaces=0,1,2,3,4,5,6,7 syno_hdd_detect=0 panic=5 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b93fbfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b93fc000-0x00000000b942bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b942c000-0x00000000b943bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b943c000-0x00000000b9939fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b993a000-0x00000000b9bbbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9bbc000-0x00000000b9c0cfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000b9c0d000-0x00000000b9c0dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9c0e000-0x00000000b9c4ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9c50000-0x00000000b9dbffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9dc0000-0x00000000b9ff9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x00038450-0x0003847f] usable ==> usable [ 0.000000] e820: update [mem 0x000383e0-0x0003844f] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x00000000000383df] usable [ 0.000000] reserve setup_data: [mem 0x00000000000383e0-0x000000000003847f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000038480-0x000000000003efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] reserve setup_data: [mem 0x000000001f000000-0x000000001f0fffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000001f100000-0x000000001fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000020100000-0x00000000b93fbfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b93fc000-0x00000000b942bfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b942c000-0x00000000b943bfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000b943c000-0x00000000b9939fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000b993a000-0x00000000b9bbbfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b9bbc000-0x00000000b9c0cfff] type 20 [ 0.000000] reserve setup_data: [mem 0x00000000b9c0d000-0x00000000b9c0dfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b9c0e000-0x00000000b9c4ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b9c50000-0x00000000b9dbffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b9dc0000-0x00000000b9ff9fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0xb9bb8318 ACPI=0xb9430000 ACPI 2.0=0xb9430000 SMBIOS=0xf05b0 MPS=0xfd630 [ 0.000000] esrt: Reserving ESRT space from 0x00000000b9bb8318 to 0x00000000b9bb8350. [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 11/24/2018 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BA800000 mask FFF800000 uncachable [ 0.000000] 3 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 4 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820: update [mem 0xba800000-0xffffffff] usable ==> reserved [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffff8800000fd840] [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672 [ 0.000000] log_buf_len: 33554432 bytes [ 0.000000] early log buf free: 1041444(99%) [ 0.000000] RAMDISK: [mem 0x116e9000-0x1b1fffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000B9430000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000B9430080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000B943A860 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150930/tbfadt-620) [ 0.000000] ACPI: DSDT 0x00000000B9430188 00A6D1 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000B9939F80 000040 [ 0.000000] ACPI: APIC 0x00000000B943A970 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000B943A9F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000B943AA40 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000B943AAE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: LPIT 0x00000000B943AB20 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D) [ 0.000000] ACPI: HPET 0x00000000B943AC28 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000B943AC60 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000B943B3C8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000B943B658 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000B943B7D8 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000003efff] [ 0.000000] node 0: [mem 0x0000000000040000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.000000] node 0: [mem 0x000000001f100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020100000-0x00000000b93fbfff] [ 0.000000] node 0: [mem 0x00000000b9c0d000-0x00000000b9c0dfff] [ 0.000000] node 0: [mem 0x00000000b9c50000-0x00000000b9dbffff] [ 0.000000] node 0: [mem 0x00000000b9ffa000-0x00000000b9ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1020689 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11790 pages used for memmap [ 0.000000] DMA32 zone: 754547 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.000000] Reserving Intel graphics memory at [mem 0xbb000000-0xbeffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00038000-0x00038fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00038000-0x00038fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb93fc000-0xb942bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb942c000-0xb943bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb943c000-0xb9939fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb993a000-0xb9bbbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9bbc000-0xb9c0cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9c0e000-0xb9c4ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9dc0000-0xb9ff9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 37 pages/cpu @ffff88013dc00000 s111576 r8192 d31784 u524288 [ 0.000000] pcpu-alloc: s111576 r8192 d31784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1004713 [ 0.000000] Kernel command line: withefi earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 consoleblank=600 netif_num=2 pid=0x5591 earlycon=uart8250,io,0x3f8,115200n8 mac2=001132599e65 mac1=001132599e64 sn=2150SQRESF4NH modprobe.blacklist=evbug,cdc_ether pcie_aspm=off rootwait SMBusHddDynamicPower=1 vid=0x0781 elevator=elevator loglevel=15 HddHotplug=1 skip_vender_mac_interfaces=0,1,2,3,4,5,6,7 syno_hdd_detect=0 panic=5 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 [ 0.000000] Synology Hardware Version: DS3622xs+ [ 0.000000] Internal netif num: 2 [ 0.000000] Mac2: 001132599e65 [ 0.000000] Mac1: 001132599e64 [ 0.000000] Serial Number: 2150SQRESF4NH [ 0.000000] PCIe ASPM is disabled [ 0.000000] Support SMBus HDD Dynamic Power Control. [ 0.000000] Support HDD Hotplug. [ 0.000000] Skip vender mac interfaces: 0,1,2,3,4,5,6,7 [ 0.000000] SYNO GPIO HDD detect pin: 0 [ 0.000000] Vender format version: 2 [ 0.000000] Power on seq num: 0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3741000K/4082756K available (5634K kernel code, 882K rwdata, 1776K rodata, 936K init, 1568K bss, 341756K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] do_IRQ: 0.236 No irq handler for vector [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] bootconsole [uart0] disabled [ 0.000000] Maximum core-clock to bus-clock ratio: 0x18 [ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz [ 0.000000] TSC runs at 1996800 KHz [ 0.000000] lapic_timer_frequency = 83200 [ 0.000000] tsc: Detected 1996.800 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=1996800) [ 0.000523] pid_max: default: 32768 minimum: 301 [ 0.000759] ACPI: Core revision 20150930 [ 0.014234] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.014616] Security Framework initialized [ 0.014826] AppArmor: AppArmor initialized [ 0.015050] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.015377] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.016007] Initializing cgroup subsys io [ 0.016210] Initializing cgroup subsys memory [ 0.016433] Initializing cgroup subsys devices [ 0.016654] Initializing cgroup subsys freezer [ 0.016909] CPU: Physical Processor ID: 0 [ 0.017108] CPU: Processor Core ID: 0 [ 0.022066] CPU0: Thermal monitoring enabled (TM1) [ 0.022304] process: using mwait in idle threads [ 0.022534] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.022798] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.023377] Freeing SMP alternatives memory: 24K [ 0.024434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.034740] TSC deadline timer enabled [ 0.034929] smpboot: CPU0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (family: 0x6, model: 0x37, stepping: 0x9) [ 0.035459] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.036008] ... version: 3 [ 0.036207] ... bit width: 40 [ 0.036409] ... generic registers: 2 [ 0.036608] ... value mask: 000000ffffffffff [ 0.036867] ... max period: 0000007fffffffff [ 0.037129] ... fixed-purpose events: 3 [ 0.037328] ... event mask: 0000000700000003 [ 0.038150] x86: Booting SMP configuration: [ 0.038360] .... node #0, CPUs: #1 #2 #3 [ 0.059543] x86: Booted up 1 node, 4 CPUs [ 0.059761] smpboot: Total of 4 processors activated (15974.40 BogoMIPS) [ 0.060581] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.061288] devtmpfs: initialized [ 0.061785] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes) [ 0.062162] PM: Registering ACPI NVS region [mem 0xb943c000-0xb9939fff] (5234688 bytes) [ 0.062755] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.063230] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.063866] NET: Registered protocol family 16 [ 0.067583] cpuidle: using governor ladder [ 0.072595] cpuidle: using governor menu [ 0.072875] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.073243] ACPI: bus type PCI registered [ 0.073549] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.074009] PCI: not using MMCONFIG [ 0.074184] PCI: Using configuration type 1 for base access [ 0.080684] ACPI: Added _OSI(Module Device) [ 0.080896] ACPI: Added _OSI(Processor Device) [ 0.081122] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.081354] ACPI: Added _OSI(Processor Aggregator Device) [ 0.092095] ACPI: Dynamic OEM Table Load: [ 0.092325] ACPI: SSDT 0xFFFF8800B4F80C00 0003BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.093615] ACPI: Dynamic OEM Table Load: [ 0.093836] ACPI: SSDT 0xFFFF8801388D9000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.095480] ACPI: Dynamic OEM Table Load: [ 0.095701] ACPI: SSDT 0xFFFF8800B4EC9000 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.096957] ACPI: Dynamic OEM Table Load: [ 0.097177] ACPI: SSDT 0xFFFF8801393C86C0 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.099545] ACPI: Interpreter enabled [ 0.099748] ACPI: (supports S0 S4 S5) [ 0.099932] ACPI: Using IOAPIC for interrupt routing [ 0.100233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.101686] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.102514] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.110594] ACPI: Power Resource [USBC] (on) [ 0.112167] ACPI: Power Resource [PLPE] (on) [ 0.112638] ACPI: Power Resource [PLPE] (on) [ 0.118656] ACPI: Power Resource [CLK0] (off) [ 0.118943] ACPI: Power Resource [CLK1] (off) [ 0.122445] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.122755] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] [ 0.123224] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.123939] PCI host bridge to bus 0000:00 [ 0.124145] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.124452] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.124783] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.125114] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.125444] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.125811] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.126175] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.126538] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0911fff window] [ 0.126905] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.127183] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.127659] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.127974] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff] [ 0.128288] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref] [ 0.128622] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087] [ 0.129078] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.129396] pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077] [ 0.129676] pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063] [ 0.129956] pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057] [ 0.130241] pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043] [ 0.130522] pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f] [ 0.130802] pci 0000:00:13.0: reg 0x24: [mem 0xd0911000-0xd09117ff] [ 0.131142] pci 0000:00:13.0: PME# supported from D3hot [ 0.131548] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.131865] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit] [ 0.132244] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.132647] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.132994] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.133324] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff] [ 0.133646] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff] [ 0.134037] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.134453] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.134809] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.135252] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.135603] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.136050] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.136401] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.136844] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.137200] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.137649] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.138157] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.138495] pci 0000:00:1f.3: reg 0x10: [mem 0xd0910000-0xd091001f] [ 0.138869] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.139424] pci 0000:01:00.0: [8086:150c] type 00 class 0x020000 [ 0.139779] pci 0000:01:00.0: reg 0x10: [mem 0xd0880000-0xd089ffff] [ 0.140100] pci 0000:01:00.0: reg 0x14: [mem 0xd0800000-0xd087ffff] [ 0.140427] pci 0000:01:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.140715] pci 0000:01:00.0: reg 0x1c: [mem 0xd08a0000-0xd08a3fff] [ 0.141135] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.141497] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.141824] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.142071] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.142370] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 0.142757] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.143004] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.143374] pci 0000:03:00.0: [1b4b:9215] type 00 class 0x010601 [ 0.143703] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.143995] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.144281] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.144566] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.144854] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.145138] pci 0000:03:00.0: reg 0x24: [mem 0xd0710000-0xd07107ff] [ 0.145454] pci 0000:03:00.0: reg 0x30: [mem 0xd0700000-0xd070ffff pref] [ 0.145829] pci 0000:03:00.0: PME# supported from D3hot [ 0.146140] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.146467] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.146714] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.147013] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff] [ 0.147424] pci 0000:04:00.0: [8086:150c] type 00 class 0x020000 [ 0.147778] pci 0000:04:00.0: reg 0x10: [mem 0xd0680000-0xd069ffff] [ 0.148099] pci 0000:04:00.0: reg 0x14: [mem 0xd0600000-0xd067ffff] [ 0.148425] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc01f] [ 0.148714] pci 0000:04:00.0: reg 0x1c: [mem 0xd06a0000-0xd06a3fff] [ 0.149134] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.149497] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.149826] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.150073] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.150372] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] [ 0.150726] pci_bus 0000:00: on NUMA node 0 [ 0.150940] pci 0000:00:1c.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128 [ 0.151359] pci 0000:01:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 512 [ 0.151775] pci 0000:00:1c.1: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128 [ 0.152188] pci 0000:00:1c.2: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128 [ 0.152605] pci 0000:03:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512 [ 0.153020] pci 0000:00:1c.3: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128 [ 0.153439] pci 0000:04:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 512 [ 0.154690] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15), disabled. [ 0.155282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15), disabled. [ 0.155864] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15), disabled. [ 0.156451] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15), disabled. [ 0.157033] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15), disabled. [ 0.157622] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.158222] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.158828] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.161268] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.161715] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.161995] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.162390] vgaarb: loaded [ 0.162527] vgaarb: bridge control possible 0000:00:02.0 [ 0.162928] SCSI subsystem initialized [ 0.163192] libata version 3.00 loaded. [ 0.163443] pps_core: LinuxPPS API ver. 1 registered [ 0.163688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.164145] PTP clock support registered [ 0.164419] EDAC MC: Ver: 3.0.0 [ 0.164752] EFI Variables Facility v0.08 2004-May-17 [ 0.168052] pstore: Registered efi as persistent store backend [ 0.168374] PCI: Using ACPI for IRQ routing [ 0.174279] PCI: pci_cache_line_size set to 64 bytes [ 0.174588] e820: reserve RAM buffer [mem 0x000383e0-0x0003ffff] [ 0.174883] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 0.175176] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 0.175468] e820: reserve RAM buffer [mem 0xb93fc000-0xbbffffff] [ 0.175773] e820: reserve RAM buffer [mem 0xb9c0e000-0xbbffffff] [ 0.176066] e820: reserve RAM buffer [mem 0xb9dc0000-0xbbffffff] [ 0.176359] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 0.176987] clocksource: Switched to clocksource refined-jiffies [ 0.188179] AppArmor: AppArmor Filesystem Enabled [ 0.188511] pnp: PnP ACPI init [ 0.188770] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.189295] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.189586] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.189883] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.190173] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.190465] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.191088] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.191379] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.191669] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.191964] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.192257] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.192661] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.193583] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.193924] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.194252] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.194575] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.194898] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.195220] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.195547] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.195870] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.196193] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.196517] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.198622] pnp: PnP ACPI: found 5 devices [ 0.207144] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.207605] clocksource: Switched to clocksource acpi_pm [ 0.207890] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.208526] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.209146] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.209714] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.210272] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.210891] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.211431] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.212031] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.212526] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.213079] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.213678] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.214218] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.214817] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.215357] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.215951] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.216499] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.216930] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.217321] pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000] [ 0.217706] pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000] [ 0.218054] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.218425] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.218856] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.219228] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.219659] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.220044] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.220437] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.220868] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.221261] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.221686] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.222077] pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000] [ 0.222403] pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000] [ 0.222810] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.223182] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.223574] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.224005] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.224394] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.224696] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.224997] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 0.225332] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.225577] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.225941] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.226186] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.226486] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff] [ 0.226880] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.227126] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.227426] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] [ 0.227817] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.228091] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.228393] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.228754] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.229056] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.229390] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.229774] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.230113] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0911fff window] [ 0.230452] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.230784] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff] [ 0.231090] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.231364] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.231679] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff] [ 0.231996] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.232269] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff] [ 0.232614] NET: Registered protocol family 2 [ 0.232944] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.234309] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.234801] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.235256] TCP: Hash tables configured (established 32768 bind 32768) [ 0.235635] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.236031] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.236440] NET: Registered protocol family 1 [ 0.236744] pci 0000:00:02.0: Video device with shadowed ROM [ 0.237299] pci 0000:03:00.0: Apply mv9235 specific programming steps [ 0.237621] PCI: CLS 64 bytes, default 64 [ 8.373788] Trying to unpack rootfs image as initramfs... [ 8.573401] Freeing initrd memory: 158812K [ 8.576070] redpill: loading out-of-tree module taints kernel. [ 8.576411] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 8.620817] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 8.621206] software IO TLB: mapped [mem 0xb53fc000-0xb93fc000] (64MB) [ 8.622766] audit: initializing netlink subsys (disabled) [ 8.623136] audit: type=2000 audit(1723690696.596:1): initialized [ 8.623783] Initialise system trusted keyring [ 8.690044] VFS: Disk quotas dquot_6.6.0 [ 8.690398] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 8.958317] Key type asymmetric registered [ 8.958529] Asymmetric key parser 'x509' registered [ 8.958897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 8.959273] io scheduler noop registered [ 8.959470] io scheduler deadline registered [ 8.959830] io scheduler cfq registered (default) [ 9.624731] tsc: Refined TSC clocksource calibration: 1999.999 MHz [ 9.625040] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85afc727, max_idle_ns: 881590685098 ns [ 9.788301] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 9.835593] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 10.016773] brd: module loaded [ 10.017117] Loading iSCSI transport class v2.0-870. [ 10.017979] rdac: device handler registered [ 10.075038] i2c /dev entries driver [ 10.075535] i801_smbus 0000:00:1f.3: SMBus using polling [ 10.080578] ahci 0000:00:13.0: version 3.0 [ 10.080929] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 10.081382] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 10.081833] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso [ 10.131119] scsi host0: ahci [ 10.158718] scsi host1: ahci [ 10.158994] ata1: SATA max UDMA/133 abar m2048@0xd0911000 port 0xd0911100 irq 87 [ 10.159361] ata2: SATA max UDMA/133 abar m2048@0xd0911000 port 0xd0911180 irq 87 [ 10.170639] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 10.171044] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 10.200858] scsi host2: ahci [ 10.221715] scsi host3: ahci [ 10.239178] scsi host4: ahci [ 10.242574] scsi host5: ahci [ 10.242934] ata3: SATA max UDMA/133 abar m2048@0xd0710000 port 0xd0710100 irq 88 [ 10.243304] ata4: SATA max UDMA/133 abar m2048@0xd0710000 port 0xd0710180 irq 88 [ 10.243728] ata5: SATA max UDMA/133 abar m2048@0xd0710000 port 0xd0710200 irq 88 [ 10.244107] ata6: SATA max UDMA/133 abar m2048@0xd0710000 port 0xd0710280 irq 88 [ 10.244734] rtc_cmos 00:00: RTC can wake from S4 [ 10.245162] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 10.245492] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 10.246098] md: raid1 personality registered for level 1 [ 10.247863] NET: Registered protocol family 17 [ 10.248129] Key type dns_resolver registered [ 10.249095] mce: Using 6 MCE banks [ 10.249558] registered taskstats version 1 [ 10.249840] Loading compiled-in untrusted X.509 certificates [ 10.250128] Loading compiled-in X.509 certificates [ 10.250410] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 10.252491] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 10.253074] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 10.253713] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 10.254232] page_owner is disabled [ 10.254443] AppArmor: AppArmor sha1 policy hashing enabled [ 10.272463] rtc_cmos 00:00: setting system clock to 2024-08-15 02:58:19 UTC (1723690699) [ 10.465055] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.466107] ata2.00: ATA-10: TS128GMSA230S, R0427GN1, max UDMA/133 [ 10.466410] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 10.466756] ata2.00: SN:H437671454 [ 10.467083] ata1: SATA link down (SStatus 0 SControl 300) [ 10.467351] ata1: Disk is present for SATA link down event [ 10.467637] ata2.00: configured for UDMA/133 [ 10.469093] ata2.00: Find SSD disks. [TS128GMSA230S] [ 10.469826] scsi 1:0:0:0: Direct-Access ATA TS128GMSA230S 7GN1 PQ: 0 ANSI: 5 [ 10.470716] ata2.00: Enabling discard_zeroes_data [ 10.470982] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 10.471592] sd 1:0:0:0: [sdb] Write Protect is off [ 10.471832] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 10 [ 10.472215] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 10.472890] ata2.00: Enabling discard_zeroes_data [ 10.473637] sdb: sdb1 sdb2 sdb3 [ 10.474330] ata2.00: Enabling discard_zeroes_data [ 10.474829] sd 1:0:0:0: [sdb] Attached SCSI disk [ 10.552277] ata4: SATA link down (SStatus 0 SControl 300) [ 10.552548] ata4: Disk is present for SATA link down event [ 10.626458] clocksource: Switched to clocksource tsc [ 10.707424] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 10.707753] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 10.708090] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 10.709671] ata6.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 10.709990] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 10.710337] ata6.00: SN: Y5KJ4MATS [ 10.711896] ata6.00: configured for UDMA/133 [ 10.712723] ata5.00: disabling queued TRIM support [ 10.712972] ata5.00: ATA-9: WDC WD80EMAZ-00WJTA0, 83.H0A83, max UDMA/133 [ 10.713299] ata5.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 10.713657] ata5.00: SN:7JKYRZXC [ 10.713828] ata3.00: disabling queued TRIM support [ 10.714065] ata3.00: ATA-9: WDC WD80EMAZ-00WJTA0, 83.H0A83, max UDMA/133 [ 10.714392] ata3.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 10.714747] ata3.00: SN:7HK23VDN [ 10.721097] ata5.00: disabling queued TRIM support [ 10.721338] ata5.00: configured for UDMA/133 [ 10.722208] ata3.00: disabling queued TRIM support [ 10.722454] ata3.00: configured for UDMA/133 [ 10.723066] scsi 2:0:0:0: Direct-Access WDC WD80EMAZ-00WJTA0 0A83 PQ: 0 ANSI: 5 [ 10.723909] sd 2:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 10.724301] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 10.724762] sd 2:0:0:0: [sdc] Write Protect is off [ 10.725005] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 10 [ 10.725314] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 10.726404] scsi 4:0:0:0: Direct-Access WDC WD80EMAZ-00WJTA0 0A83 PQ: 0 ANSI: 5 [ 10.727331] sd 4:0:0:0: [sde] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 10.727747] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 10.728143] sd 4:0:0:0: [sde] Write Protect is off [ 10.728384] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 10 [ 10.728711] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 10.730298] scsi 5:0:0:0: Direct-Access TOSHIBA DT01ACA200 ABB0 PQ: 0 ANSI: 5 [ 10.731154] sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 10.731549] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 10.731943] sd 5:0:0:0: [sdf] Write Protect is off [ 10.732187] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 10 [ 10.732515] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 10.758997] sdf: sdf1 sdf2 sdf3 [ 10.759806] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 10.786362] sdc: sdc1 sdc2 sdc3 [ 10.787112] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 10.790281] sde: sde1 sde2 sde3 [ 10.791164] sd 4:0:0:0: [sde] Attached SCSI removable disk [ 10.793136] Freeing unused kernel memory: 936K [ 10.793364] Write protecting the kernel read-only data: 8192k [ 10.794046] Freeing unused kernel memory: 500K [ 10.795332] Freeing unused kernel memory: 272K [ 10.986850] random: nonblocking pool is initialized [ 11.905708] ACPI: bus type USB registered [ 11.905959] usbcore: registered new interface driver usbfs [ 11.906254] usbcore: registered new interface driver hub [ 11.906559] usbcore: registered new interface driver ethub [ 11.906849] usbcore: registered new device driver usb [ 11.931079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.940023] ehci-pci: EHCI PCI platform driver [ 11.952367] uhci_hcd: USB Universal Host Controller Interface driver [ 11.974599] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 11.974870] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 12.176334] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010 [ 12.176747] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 12.177492] hub 1-0:1.0: USB hub found [ 12.177706] hub 1-0:1.0: 6 ports detected [ 12.178562] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 12.178837] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 12.179268] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 12.179988] hub 2-0:1.0: USB hub found [ 12.180195] hub 2-0:1.0: 1 port detected [ 12.370522] udevd[4848]: starting version 3.2.14 [ 12.371631] udevd[4848]: specified group 'tty' unknown [ 12.371979] udevd[4848]: specified group 'dialout' unknown [ 12.372307] udevd[4848]: specified group 'kmem' unknown [ 12.372608] udevd[4848]: specified group 'input' unknown [ 12.372917] udevd[4848]: specified group 'video' unknown [ 12.373269] udevd[4848]: specified group 'sgx' unknown [ 12.373575] udevd[4848]: specified group 'audio' unknown [ 12.374008] udevd[4848]: specified group 'disk' unknown [ 12.374322] udevd[4848]: specified group 'cdrom' unknown [ 12.374657] udevd[4848]: specified group 'tape' unknown [ 12.375030] udevd[4848]: specified group 'kvm' unknown [ 12.379553] udevd[4849]: starting eudev-3.2.14 [ 12.384604] udevd[4849]: specified group 'tty' unknown [ 12.384948] udevd[4849]: specified group 'dialout' unknown [ 12.385271] udevd[4849]: specified group 'kmem' unknown [ 12.385573] udevd[4849]: specified group 'input' unknown [ 12.385882] udevd[4849]: specified group 'video' unknown [ 12.386235] udevd[4849]: specified group 'sgx' unknown [ 12.386542] udevd[4849]: specified group 'audio' unknown [ 12.386978] udevd[4849]: specified group 'disk' unknown [ 12.387285] udevd[4849]: specified group 'cdrom' unknown [ 12.387626] udevd[4849]: specified group 'tape' unknown [ 12.387999] udevd[4849]: specified group 'kvm' unknown [ 12.413545] Monitor-Mwait will be used to enter C-1 state [ 12.413838] Monitor-Mwait will be used to enter C-2 state [ 12.416969] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 12.417397] ACPI: Power Button [PWRC] [ 12.417662] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 12.418068] ACPI: Sleep Button [SLPB] [ 12.418343] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 12.418705] ACPI: Power Button [PWRF] [ 12.420196] ACPI: acpi_idle registered with cpuidle [ 12.421192] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 12.434298] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 12.434632] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 12.435908] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.449749] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.7-NAPI [ 12.450051] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. [ 12.450613] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 12.556476] Got empty serial number. Generate serial number from product. [ 12.557347] hub 1-2:1.0: USB hub found [ 12.557825] hub 1-2:1.0: 4 ports detected [ 12.557947] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:90:27:e8:35:df [ 12.557949] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 12.557967] e1000e 0000:01:00.0 eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF [ 12.558318] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 12.660062] e1000e 0000:04:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 10:90:27:e8:35:e0 [ 12.660451] e1000e 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 12.660805] e1000e 0000:04:00.0 eth1: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF [ 12.678615] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 12.697454] usb-storage 2-1:1.0: USB Mass Storage device detected [ 12.697909] scsi host6: usb-storage 2-1:1.0 [ 12.698240] usbcore: registered new interface driver usb-storage [ 12.699687] usbcore: registered new interface driver uas [ 13.704131] scsi 6:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 13.705303] sd 6:0:0:0: [synoboot] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 13.706560] sd 6:0:0:0: [synoboot] Write Protect is off [ 13.706821] sd 6:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 13.707327] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 13.710064] synoboot: synoboot1 synoboot2 synoboot3 [ 13.711536] sd 6:0:0:0: [synoboot] Attached SCSI removable disk [ 23.711519] Module [kvm_intel] is removed. [ 23.727834] Module [kvm] is removed. [ 23.736162] Module [irqbypass] is removed. [ 23.800922] synobios open /dev/ttyS1 success [ 23.801189] 2024-8-15 2:58:32 UTC [ 23.801368] synobios: load, major number 201 [ 23.801582] Brand: Synology [ 23.801723] Model: VirtualDSM [ 23.801873] synobios_detect_cpu_model: model name: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, nr_cpu_ids: 4 [ 23.802353] synobios cpu_arch proc entry initialized [ 23.802598] synobios crypto_hw proc entry initialized [ 23.802846] synobios syno_platform proc entry initialized [ 23.812583] Module [synobios] is removed. [ 23.812800] synobios: unload [ 24.495872] md: md0 stopped. [ 24.498036] md: bind [ 24.498354] md: bind [ 24.498712] md: bind [ 24.499047] md: bind [ 24.500674] md/raid1:md0: active with 4 out of 11 mirrors [ 24.530160] md0: detected capacity change from 0 to 8589869056 [ 26.011723] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 26.065866] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 26.156037] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 26.173329] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 26.313803] loop: module loaded [ 30.085907] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 30.095009] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 30.276370] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 30.276746] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 30.277101] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 30.277455] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 30.299195] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 30.299554] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 30.299919] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 30.300274] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 30.387682] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 30.397411] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota,barrier=1 [ 31.741353] kvm: already loaded the other module [ 31.751544] kvm: already loaded the other module [ 32.553574] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 32.553934] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 32.554288] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 32.554654] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 32.555009] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (inetd) [ 32.637877] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 32.639017] systemd[1]: Detected architecture x86-64. [ 32.639584] systemd[1]: Set hostname to . [ 34.206949] systemd[1]: Configuration file /usr/lib/systemd/system/acpid.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 34.213496] systemd[1]: Configuration file /etc/systemd/system/dhpilot_service.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 34.214584] systemd[1]: Configuration file /etc/systemd/system/dhpilot_bot.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 34.226291] systemd[1]: Cannot add dependency job for unit syno-mlnx-rdma-modules-load.service, ignoring: Unit syno-mlnx-rdma-modules-load.service is masked. [ 34.227042] systemd[1]: Cannot add dependency job for unit syno-qlogic-rdma-modules-load.service, ignoring: Unit syno-qlogic-rdma-modules-load.service is masked. [ 34.228343] systemd[1]: Cannot add dependency job for unit pkg-synobrm-recovery-restart.service, ignoring: Unit pkg-synobrm-recovery-restart.service failed to load: No such file or directory. [ 34.229246] systemd[1]: Cannot add dependency job for unit pkg-synohbed-recovery-restart.service, ignoring: Unit pkg-synohbed-recovery-restart.service failed to load: No such file or directory. [ 34.230091] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. [ 34.230796] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. [ 34.231807] systemd[1]: Cannot add dependency job for unit pkg-synorelayd-reload-package-config.service, ignoring: Unit synorelayd.service failed to load: No such file or directory. [ 34.232632] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. [ 34.233523] systemd[1]: Cannot add dependency job for unit pkg-synorelayd-reload-fixed-package-config.service, ignoring: Unit synorelayd.service failed to load: No such file or directory. [ 34.236954] systemd[1]: Reached target Login Prompts. [ 34.237238] systemd[1]: Starting Login Prompts. [ 34.237510] systemd[1]: Reached target Swap. [ 34.237738] systemd[1]: Starting Swap. [ 34.238002] systemd[1]: Reached target Paths. [ 34.238237] systemd[1]: Starting Paths. [ 34.238487] systemd[1]: Reached target Timers. [ 34.238720] systemd[1]: Starting Timers. [ 34.239265] systemd[1]: Created slice Root Slice. [ 34.239518] systemd[1]: Starting Root Slice. [ 34.239963] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape.. [ 34.240414] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape.. [ 34.241015] systemd[1]: Created slice git's slice. [ 34.241272] systemd[1]: Starting git's slice. [ 34.241677] systemd[1]: Created slice StorageManager's slice. [ 34.241973] systemd[1]: Starting StorageManager's slice. [ 34.242429] systemd[1]: Created slice QuickConnect's slice. [ 34.242719] systemd[1]: Starting QuickConnect's slice. [ 34.243181] systemd[1]: Created slice DownloadStation's slice. [ 34.243481] systemd[1]: Starting DownloadStation's slice. [ 34.243955] systemd[1]: Created slice User and Session Slice. [ 34.244261] systemd[1]: Starting User and Session Slice. [ 34.244709] systemd[1]: Created slice Task Scheduler Group. [ 34.244997] systemd[1]: Starting Task Scheduler Group. [ 34.245449] systemd[1]: Created slice Synology Swap Works. [ 34.245732] systemd[1]: Starting Synology Swap Works. [ 34.246184] systemd[1]: Created slice Synology DSM internal service. [ 34.246511] systemd[1]: Starting Synology DSM internal service. [ 34.246992] systemd[1]: Created slice SNMP. [ 34.247221] systemd[1]: Starting SNMP. [ 34.247602] systemd[1]: Created slice Shared Folder Sync. [ 34.247882] systemd[1]: Starting Shared Folder Sync. [ 34.248338] systemd[1]: Created slice python311's slice. [ 34.248614] systemd[1]: Starting python311's slice. [ 34.249042] systemd[1]: Created slice Synology Cache Advisor. [ 34.249345] systemd[1]: Starting Synology Cache Advisor. [ 34.249796] systemd[1]: Created slice TextEditor's slice. [ 34.250082] systemd[1]: Starting TextEditor's slice. [ 34.250517] systemd[1]: Created slice OAuthService's slice. [ 34.250805] systemd[1]: Starting OAuthService's slice. [ 34.251257] systemd[1]: Created slice PHP8.0's slice. [ 34.251521] systemd[1]: Starting PHP8.0's slice. [ 34.251893] systemd[1]: Listening on Journal Audit Socket. [ 34.252184] systemd[1]: Starting Journal Audit Socket. [ 34.252633] systemd[1]: Created slice Python2's slice. [ 34.252900] systemd[1]: Starting Python2's slice. [ 34.253333] systemd[1]: Created slice Python3.9's slice. [ 34.253609] systemd[1]: Starting Python3.9's slice. [ 34.254041] systemd[1]: Created slice SupportService's slice. [ 34.254343] systemd[1]: Starting SupportService's slice. [ 34.254796] systemd[1]: Created slice Synology Flashcache. [ 34.255085] systemd[1]: Starting Synology Flashcache. [ 34.255528] systemd[1]: Created slice MariaDB10's slice. [ 34.255804] systemd[1]: Starting MariaDB10's slice. [ 34.256250] systemd[1]: Created slice ActiveInsight's slice. [ 34.256542] systemd[1]: Starting ActiveInsight's slice. [ 34.256881] systemd[1]: Listening on udev Control Socket. [ 34.257180] systemd[1]: Starting udev Control Socket. [ 34.257626] systemd[1]: Created slice LogCenter's slice. [ 34.257901] systemd[1]: Starting LogCenter's slice. [ 34.258359] systemd[1]: Created slice SynoFinder's slice. [ 34.258639] systemd[1]: Starting SynoFinder's slice. [ 34.259084] systemd[1]: Created slice ContainerManager's slice. [ 34.259388] systemd[1]: Starting ContainerManager's slice. [ 34.259847] systemd[1]: Created slice WebDAVServer's slice. [ 34.260186] systemd[1]: Starting WebDAVServer's slice. [ 34.260637] systemd[1]: Created slice BTRFS Optimization. [ 34.260917] systemd[1]: Starting BTRFS Optimization. [ 34.261356] systemd[1]: Created slice PDFViewer's slice. [ 34.261631] systemd[1]: Starting PDFViewer's slice. [ 34.262064] systemd[1]: Created slice synocli-file's slice. [ 34.262365] systemd[1]: Starting synocli-file's slice. [ 34.262807] systemd[1]: Created slice exFAT-Free's slice. [ 34.263094] systemd[1]: Starting exFAT-Free's slice. [ 34.263530] systemd[1]: Created slice SecureSignIn's slice. [ 34.263818] systemd[1]: Starting SecureSignIn's slice. [ 34.264265] systemd[1]: Created slice CodecPack's slice. [ 34.264541] systemd[1]: Starting CodecPack's slice. [ 34.264975] systemd[1]: Created slice SMBService's slice. [ 34.265261] systemd[1]: Starting SMBService's slice. [ 34.265701] systemd[1]: Created slice synobackup daemon slice. [ 34.266001] systemd[1]: Starting synobackup daemon slice. [ 34.266468] systemd[1]: Created slice Synology DSM Storage Service. [ 34.266789] systemd[1]: Starting Synology DSM Storage Service. [ 34.267326] systemd[1]: Created slice System Slice. [ 34.267608] systemd[1]: Starting System Slice. [ 34.268156] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. [ 34.268576] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. [ 34.269217] systemd[1]: Created slice Performance alarm. [ 34.269493] systemd[1]: Starting Performance alarm. [ 34.269762] systemd[1]: Reached target Slices. [ 34.269996] systemd[1]: Starting Slices. [ 34.270390] systemd[1]: Created slice phpMyAdmin's slice. [ 34.270671] systemd[1]: Starting phpMyAdmin's slice. [ 34.271118] systemd[1]: Created slice Synology DSM desktop service. [ 34.271439] systemd[1]: Starting Synology DSM desktop service. [ 34.271915] systemd[1]: Created slice OpenBSD Secure Shell server. [ 34.272247] systemd[1]: Starting OpenBSD Secure Shell server. [ 34.272722] systemd[1]: Created slice FileStation's slice. [ 34.273005] systemd[1]: Starting FileStation's slice. [ 34.273453] systemd[1]: Created slice ffmpeg6's slice. [ 34.273720] systemd[1]: Starting ffmpeg6's slice. [ 34.274154] systemd[1]: Created slice VideoStation's slice. [ 34.274442] systemd[1]: Starting VideoStation's slice. [ 34.274850] systemd[1]: Listening on Journal Socket. [ 34.275152] systemd[1]: Starting Journal Socket. [ 34.282297] systemd[1]: Starting Set hostname... [ 34.283994] systemd[1]: Starting Load Kernel Modules... [ 34.285631] systemd[1]: Starting Set time zone information to kernel... [ 34.287235] systemd[1]: Starting Synology Plugin Daemon... [ 34.289087] systemd[1]: Starting Set boot sequence config... [ 34.290756] systemd[1]: Mounting Debug File System... [ 34.292591] systemd[1]: Starting Load ntb_brd module... [ 34.294285] systemd[1]: Starting check integrity of rd.gz decompression... [ 34.296048] systemd[1]: Starting Journal Socket (/dev/log). [ 34.297902] systemd[1]: Started Machine Check Exception Logging Daemon. [ 34.298367] systemd[1]: Starting Machine Check Exception Logging Daemon... [ 34.300200] systemd[1]: Starting unbind USB device... [ 34.301892] systemd[1]: Starting Link coredump path to volume if possible... [ 34.304080] systemd[1]: Mounting Temporary Directory... [ 34.306252] systemd[1]: Starting SED Bootup Action... [ 34.306639] systemd[1]: Started Set project quota ID for /var/log. [ 34.308452] systemd[1]: Starting Disabling fan checking flag ...... [ 34.309571] systemd[1]: Created slice HybridShare's slice. [ 34.309927] systemd[1]: Starting HybridShare's slice. [ 34.310562] systemd[1]: Created slice ScsiTarget's slice. [ 34.310864] systemd[1]: Starting ScsiTarget's slice. [ 34.311420] systemd[1]: Created slice WebStation's slice. [ 34.311711] systemd[1]: Starting WebStation's slice. [ 34.312417] systemd[1]: Created slice Synology Index slice (WAT). [ 34.312779] systemd[1]: Starting Synology Index slice (WAT). [ 34.315568] systemd[1]: Listening on udev Kernel Socket. [ 34.316341] systemd[1]: Starting udev Kernel Socket. [ 34.317046] systemd[1]: Created slice BTRFS Space Reclaim. [ 34.317376] systemd[1]: Starting BTRFS Space Reclaim. [ 34.317979] systemd[1]: Created slice scemd. [ 34.318227] systemd[1]: Starting scemd. [ 34.318744] systemd[1]: Created slice Package Center Slice. [ 34.319041] systemd[1]: Starting Package Center Slice. [ 34.319554] systemd[1]: Created slice SSDP service. [ 34.319815] systemd[1]: Starting SSDP service. [ 34.321578] systemd[1]: Mounted Debug File System. [ 34.321903] systemd[1]: Mounted Temporary Directory. [ 34.322780] systemd[1]: Started Set hostname. [ 34.323527] systemd[1]: Started Set time zone information to kernel. [ 34.324253] systemd[1]: Started Synology Plugin Daemon. [ 34.325089] systemd[1]: Started Set boot sequence config. [ 34.325977] systemd[1]: Started Load ntb_brd module. [ 34.326515] systemd[1]: Listening on Journal Socket (/dev/log). [ 34.327458] systemd[1]: Started unbind USB device. [ 34.328362] systemd[1]: Started Disabling fan checking flag .... [ 34.328817] systemd[1]: Reached target Sockets. [ 34.329059] systemd[1]: Starting Sockets. [ 34.331002] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 34.335478] flashcache: flashcache-1.0-2023-09-23-22:08 initialized [ 34.336532] systemd[1]: Starting Journal Service... [ 34.336893] systemd[1]: Reached target Local File Systems. [ 34.337230] systemd[1]: Starting Local File Systems. [ 34.338502] systemd[1]: Starting D-Bus Session Message Bus... [ 34.340156] systemd[1]: Starting udev Coldplug all Devices... [ 34.341747] systemd[1]: Starting D-Bus System Message Bus... [ 34.343626] systemd[1]: Starting Set boot sequence config for temporary use... [ 34.345288] systemd[1]: Starting Mount efivarfs... [ 34.346816] systemd[1]: Starting Mount usb fs... [ 34.349785] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2023-09-23-22:08-debug initialized [ 34.351014] systemd[1]: Started check integrity of rd.gz decompression. [ 34.352101] systemd[1]: Started SED Bootup Action. [ 34.361385] systemd[1]: Started Set boot sequence config for temporary use. [ 34.365871] NET: Registered protocol family 10 [ 34.366543] systemd[1]: Started Mount efivarfs. [ 34.369530] sit: IPv6 over IPv4 tunneling driver [ 34.371154] systemd[1]: Started Link coredump path to volume if possible. [ 34.388104] systemd[1]: Received SIGUSR1 from PID 6722 (syno-dbus-check). [ 34.388472] systemd[1]: Trying to reconnect to bus... [ 34.392419] systemd[1]: Loading D-Bus service... [ 34.396024] systemd[1]: Started Journal Service. [ 34.400205] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 34.402412] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 34.402808] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 34.403159] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 34.403521] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 34.416297] systemd-journald[6666]: Received request to flush runtime journal from PID 1 [ 34.453749] usbcore: registered new interface driver usblp [ 34.465969] usbcore: registered new interface driver usbhid [ 34.466247] usbhid: USB HID core driver [ 34.502906] synobios open /dev/ttyS1 success [ 34.503199] 2024-8-15 2:58:43 UTC [ 34.503368] synobios: load, major number 201 [ 34.503606] Brand: Synology [ 34.503755] Model: DS-3622xs+ [ 34.503905] set group disks wakeup number to 4, spinup time deno 7 [ 34.504216] synobios cpu_arch proc entry initialized [ 34.504505] synobios crypto_hw proc entry initialized [ 34.504765] synobios syno_platform proc entry initialized [ 34.531850] syno_hddmon: module license 'Synology Inc.' taints kernel. [ 34.532197] Disabling lock debugging due to kernel taint [ 35.637928] zram: Added device: zram0 [ 35.638449] zram: Added device: zram1 [ 35.638861] zram: Added device: zram2 [ 35.639296] zram: Added device: zram3 [ 35.774050] md: md1 stopped. [ 35.810220] md: bind [ 35.842175] md: bind [ 35.845648] md: bind [ 35.846431] md: bind [ 35.848457] md/raid1:md1: active with 4 out of 11 mirrors [ 35.868774] md1: detected capacity change from 0 to 2147418112 [ 36.024272] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 36.026386] zram0: detected capacity change from 0 to 599785472 [ 36.031810] Adding 585724k swap on /dev/zram0. Priority:1 extents:1 across:585724k SS [ 36.033593] zram1: detected capacity change from 0 to 599785472 [ 36.038823] Adding 585724k swap on /dev/zram1. Priority:1 extents:1 across:585724k SS [ 36.040590] zram2: detected capacity change from 0 to 599785472 [ 36.045917] Adding 585724k swap on /dev/zram2. Priority:1 extents:1 across:585724k SS [ 36.047694] zram3: detected capacity change from 0 to 599785472 [ 36.053029] Adding 585724k swap on /dev/zram3. Priority:1 extents:1 across:585724k SS [ 36.519429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.349536] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 37.409438] ext2: synoboot2 mounted, process=synoencvolume [ 37.418767] synoboot2 unmounted, process=synoencvolume [ 38.957589] e1000e 0000:01:00.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 39.702795] e1000e 0000:04:00.0 eth1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 39.833496] md: md2 stopped. [ 39.834544] md: bind [ 39.836295] md/raid1:md2: active with 1 out of 1 mirrors [ 39.837349] md2: detected capacity change from 0 to 117053915136 [ 39.843440] md: md3 stopped. [ 39.847778] md: bind [ 39.848360] md: bind [ 39.865806] md/raid1:md3: active with 2 out of 2 mirrors [ 39.870021] md3: detected capacity change from 0 to 7990581460992 [ 39.883219] md: md4 stopped. [ 39.884524] md: bind [ 39.896965] md/raid1:md4: active with 1 out of 1 mirrors [ 39.914795] md4: detected capacity change from 0 to 1989417172992 [ 40.608287] 8021q: 802.1Q VLAN Support v1.8 [ 40.608514] 8021q: adding VLAN 0 to HW filter on device eth0 [ 40.608826] 8021q: adding VLAN 0 to HW filter on device eth1 [ 41.494134] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.515623] audit: type=1325 audit(1723690729.999:2): table=filter family=2 entries=0 [ 41.530998] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 41.745454] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 41.755865] audit: type=1325 audit(1723690730.239:3): table=filter family=10 entries=0 [ 41.849805] audit: type=1325 audit(1723690730.333:4): table=filter family=2 entries=4 [ 41.857325] audit: type=1325 audit(1723690730.341:5): table=filter family=2 entries=4 [ 41.870322] audit: type=1325 audit(1723690730.354:6): table=filter family=2 entries=4 [ 41.879405] audit: type=1325 audit(1723690730.363:7): table=filter family=10 entries=4 [ 41.887489] audit: type=1325 audit(1723690730.371:8): table=filter family=10 entries=4 [ 41.898446] audit: type=1325 audit(1723690730.382:9): table=filter family=10 entries=4 [ 41.993258] audit: type=1325 audit(1723690730.476:10): table=filter family=2 entries=8 [ 42.009897] audit: type=1325 audit(1723690730.493:11): table=filter family=2 entries=12 [ 42.959864] flashcache_syno: /dev/vg3/volume_3 exclude check success [ 43.030712] flashcache_syno: /dev/vg2/volume_2 exclude check success [ 43.077482] flashcache_syno: /dev/vg1/volume_1 exclude check success [ 44.216041] raid6: sse2x1 gen() 769 MB/s [ 44.233032] raid6: sse2x1 xor() 2503 MB/s [ 44.250085] raid6: sse2x2 gen() 1312 MB/s [ 44.267094] raid6: sse2x2 xor() 2921 MB/s [ 44.284127] raid6: sse2x4 gen() 1031 MB/s [ 44.301151] raid6: sse2x4 xor() 1279 MB/s [ 44.301365] raid6: using algorithm sse2x2 gen() 1312 MB/s [ 44.301629] raid6: .... xor() 2921 MB/s, rmw enabled [ 44.301872] raid6: using ssse3x2 recovery algorithm [ 44.303311] xor: measuring software checksum speed [ 44.313162] prefetch64-sse: 7340.000 MB/sec [ 44.323175] generic_sse: 6588.000 MB/sec [ 44.323390] xor: using function: prefetch64-sse (7340.000 MB/sec) [ 44.386906] Btrfs loaded, crc32c=crc32c-intel [ 44.991790] BTRFS: device label 2023.12.07-12:35:17 v69057 devid 1 transid 2345 /dev/mapper/cachedev_0 [ 44.995458] BTRFS info (device dm-6): enabling auto syno reclaim space [ 44.995783] BTRFS info (device dm-6): use ssd allocation scheme [ 44.996076] BTRFS info (device dm-6): using free space tree [ 44.996382] BTRFS info (device dm-6): using free block group cache tree [ 44.996710] BTRFS info (device dm-6): has skinny extents [ 45.015700] BTRFS: device label 2023.12.07-12:35:00 v69057 devid 1 transid 9182 /dev/mapper/cachedev_1 [ 45.016958] BTRFS info (device dm-7): enabling auto syno reclaim space [ 45.017301] BTRFS info (device dm-7): use ssd allocation scheme [ 45.017595] BTRFS info (device dm-7): using free space tree [ 45.017868] BTRFS info (device dm-7): using free block group cache tree [ 45.018190] BTRFS info (device dm-7): has skinny extents [ 45.040913] BTRFS info (device dm-6): BTRFS: root of syno feature tree is null [ 45.075409] BTRFS: device label 2022.11.12-07:16:03 v42962 devid 1 transid 262164 /dev/mapper/cachedev_2 [ 45.076988] BTRFS info (device dm-8): enabling auto syno reclaim space [ 45.077320] BTRFS info (device dm-8): use ssd allocation scheme [ 45.077633] BTRFS info (device dm-8): using free space tree [ 45.077908] BTRFS info (device dm-8): using free block group cache tree [ 45.078231] BTRFS info (device dm-8): has skinny extents [ 45.103055] BTRFS info (device dm-8): BTRFS: root of syno feature tree is null [ 45.136547] BTRFS info (device dm-7): BTRFS: root of syno feature tree is null [ 51.816593] Synotify use 16384 event queue size [ 51.816856] Synotify use 16384 event queue size [ 52.894884] ata2.00: configured for UDMA/133 [ 52.895105] ata2: EH complete [ 52.895307] ata2.00: Enabling discard_zeroes_data [ 52.981647] ata3.00: disabling queued TRIM support [ 52.988891] ata3.00: disabling queued TRIM support [ 52.989141] ata3.00: configured for UDMA/133 [ 52.989361] ata3: EH complete [ 53.098991] ata5.00: disabling queued TRIM support [ 53.106202] ata5.00: disabling queued TRIM support [ 53.106456] ata5.00: configured for UDMA/133 [ 53.106676] ata5: EH complete [ 53.192445] ata6.00: configured for UDMA/133 [ 53.192670] ata6: EH complete [ 61.879420] audit_printk_skb: 105 callbacks suppressed [ 61.879678] audit: type=1325 audit(1723690750.280:47): table=filter family=2 entries=23 [ 61.887566] audit: type=1325 audit(1723690750.288:48): table=filter family=2 entries=23 [ 61.895980] audit: type=1325 audit(1723690750.296:49): table=filter family=2 entries=23 [ 61.903722] audit: type=1325 audit(1723690750.304:50): table=filter family=10 entries=33 [ 61.911446] audit: type=1325 audit(1723690750.312:51): table=filter family=10 entries=33 [ 61.919716] audit: type=1325 audit(1723690750.320:52): table=filter family=10 entries=33 [ 61.927890] audit: type=1325 audit(1723690750.328:53): table=filter family=2 entries=27 [ 61.936002] audit: type=1325 audit(1723690750.336:54): table=filter family=10 entries=37 [ 61.944190] audit: type=1325 audit(1723690750.345:55): table=filter family=2 entries=22 [ 61.952272] audit: type=1325 audit(1723690750.353:56): table=filter family=10 entries=26 [ 62.326778] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 62.949416] ext2: synoboot2 mounted, process=synopkicompatsy [ 62.962762] synoboot2 unmounted, process=synopkicompatsy [ 65.614310] iSCSI:target_core_rodsp_server.c:1025:rodsp_server_init RODSP server started, login_key(f954c4211a2b). [ 65.629510] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 65.649352] iSCSI:target_core_device.c:612:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 65.649955] iSCSI:target_core_configfs.c:5763:target_init_dbroot db_root: cannot open: /etc/target [ 65.650988] iSCSI:target_core_lunbackup.c:366:init_io_buffer_head 2048 buffers allocated, total 8388608 bytes successfully [ 65.736272] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled. [ 65.736680] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled. [ 65.737070] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. [ 65.737539] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled. [ 65.737924] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled. [ 65.982742] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512 [ 66.641618] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k. [ 66.671504] [17145]: ocs_fc_lio: ocs_scsi_ini_driver_init:1104::disabling the app heartbeat timeout detection [ 66.672005] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1225::ocs_fc_lio: driver version 12.2.385.0 [ 66.672475] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1227:: Module parameters: [ 66.672888] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1228:: Initiator = 0 [ 66.673268] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1229:: Target = 1 [ 66.673636] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1230:: ctrlmask = 0x000a [ 66.674038] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1231:: loglevel = 5 [ 66.674415] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1232:: logmask = 0x0000 [ 66.674813] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1233:: ramlog_size = 1048576 [ 66.675227] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1234:: rq_threads = 0 [ 66.675610] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1235:: wwn_bump = 0 [ 66.675993] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1236:: topology = 0 [ 66.676369] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1237:: speed = 0 [ 66.676739] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1238:: holdoff_link_online = 2 [ 66.677160] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1239:: enable_hlm = 0 [ 66.677544] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1240:: hlm_group_size = 8 [ 66.677950] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1241:: max_remote_nodes = 2048 [ 66.678372] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1242:: ethernet_license = 0 [ 66.678787] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1243:: num_scsi_ios = 8192 [ 66.679192] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1244:: dif_separate = 0 [ 66.679583] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1245:: tow_feature = 0 [ 66.679978] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1246:: tow_io_size = 65536 [ 66.680382] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1247:: tow_xri_cnt = 512 [ 66.680786] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1248:: queue_topology = eq cq rq cq mq $nulp($nwq(cq wq:ulp=$rpt1)) cq wq:len=256:class=1 [ 66.681448] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1249:: rq_selection_policy = 0 [ 66.681876] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1250:: rr_quanta = 1 [ 66.682256] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1251:: filter_ref = 0,0,0,0 [ 66.682671] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1252:: cq_process_limit = 64 [ 66.683084] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1253:: explicit_buffer_list = 0 [ 66.683508] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1254:: external_loopback = 0 [ 66.683927] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1255:: target_io_timer = 0 [ 66.684332] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1256:: target_wqe_timer = 30 [ 66.684751] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1257:: ddump_saved_size = 0 [ 66.685161] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1258:: hal_war_version = (null) [ 66.685585] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1259:: hw_cmpl_context = 1 [ 66.685996] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1260:: watchdog_timeout = 0 [ 66.686405] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1261:: heartbeat_cpu_mask = 0x0 [ 66.686835] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1262:: sliport_healthcheck = 0 [ 66.687257] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1263:: disable_fec = 0 [ 66.687645] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1264:: enable_dpp = 1 [ 66.688035] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1265:: sliport_pause_errors = disabled [ 66.688489] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1266:: enable_bbcr = 1 [ 66.688883] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1267:: fw_dump_type = 1 [ 66.689276] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1268:: enable_auto_recovery = 0 [ 66.689707] [17145]: ocs_fc_lio: ocs_driver_print_module_params:1269:: cfg_suppress_rsp = 1 [ 66.690179] [17146]: ocs_fc_lio: ocs_thread_thunk:1046::ocs_proxy running [ 69.212015] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 76.453264] fuse init (API version 7.23) [ 78.050505] aufs 4.4-20160328 [ 78.097234] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 78.144568] Bridge firewalling registered [ 78.184699] audit_printk_skb: 78 callbacks suppressed [ 78.184953] audit: type=1325 audit(1723690766.559:83): table=mangle family=2 entries=0 [ 78.242587] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 78.243020] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 78.243482] IPVS: Creating netns size=2104 id=0 [ 78.243732] IPVS: ipvs loaded. [ 78.274583] IPVS: [rr] scheduler registered. [ 80.567547] audit: type=1325 audit(1723690768.938:84): table=nat family=2 entries=5 [ 80.587589] audit: type=1325 audit(1723690768.958:85): table=filter family=2 entries=23 [ 80.626146] audit: type=1325 audit(1723690768.997:86): table=filter family=2 entries=25 [ 80.681795] audit: type=1325 audit(1723690769.052:87): table=filter family=2 entries=27 [ 80.727991] audit: type=1325 audit(1723690769.098:88): table=filter family=2 entries=29 [ 80.758487] audit: type=1325 audit(1723690769.129:89): table=filter family=2 entries=30 [ 80.777569] audit: type=1325 audit(1723690769.148:90): table=filter family=2 entries=31 [ 80.800514] Initializing XFRM netlink socket [ 80.816967] Netfilter messages via NETLINK v0.30. [ 80.886067] audit: type=1325 audit(1723690769.256:91): table=nat family=2 entries=7 [ 80.915218] audit: type=1325 audit(1723690769.285:92): table=nat family=2 entries=11 [ 81.178523] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 82.547325] device docker3a7b80a entered promiscuous mode [ 82.548966] IPv6: ADDRCONF(NETDEV_UP): docker3a7b80a: link is not ready [ 82.703830] device docker66eaf2b entered promiscuous mode [ 82.705308] IPv6: ADDRCONF(NETDEV_UP): docker66eaf2b: link is not ready [ 82.705637] docker0: port 2(docker66eaf2b) entered forwarding state [ 82.705964] docker0: port 2(docker66eaf2b) entered forwarding state [ 82.706353] docker0: port 2(docker66eaf2b) entered disabled state [ 82.917452] device dockerda2633b entered promiscuous mode [ 82.918061] IPv6: ADDRCONF(NETDEV_UP): dockerda2633b: link is not ready [ 82.918401] docker0: port 3(dockerda2633b) entered forwarding state [ 82.918756] docker0: port 3(dockerda2633b) entered forwarding state [ 82.919271] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 82.919757] docker0: port 3(dockerda2633b) entered disabled state [ 84.017708] IPVS: Creating netns size=2104 id=1 [ 84.110518] IPVS: Creating netns size=2104 id=2 [ 84.419493] eth0: renamed from docker181cfa7 [ 84.425530] IPv6: ADDRCONF(NETDEV_CHANGE): docker3a7b80a: link becomes ready [ 84.425913] docker0: port 1(docker3a7b80a) entered forwarding state [ 84.426255] docker0: port 1(docker3a7b80a) entered forwarding state [ 84.462864] docker0: port 3(dockerda2633b) entered disabled state [ 84.463886] device dockerda2633b left promiscuous mode [ 84.464267] docker0: port 3(dockerda2633b) entered disabled state [ 84.495018] eth0: renamed from docker4a9b2f3 [ 84.503800] IPv6: ADDRCONF(NETDEV_CHANGE): docker66eaf2b: link becomes ready [ 84.504229] docker0: port 2(docker66eaf2b) entered forwarding state [ 84.504571] docker0: port 2(docker66eaf2b) entered forwarding state [ 86.971104] Synotify use 16384 event queue size [ 88.393537] audit_printk_skb: 285 callbacks suppressed [ 88.393795] audit: type=1325 audit(1723690776.752:188): table=filter family=2 entries=47 [ 88.405196] audit: type=1325 audit(1723690776.763:189): table=filter family=2 entries=47 [ 88.415802] audit: type=1325 audit(1723690776.774:190): table=filter family=2 entries=47 [ 88.429531] audit: type=1325 audit(1723690776.788:191): table=filter family=10 entries=33 [ 88.438317] audit: type=1325 audit(1723690776.796:192): table=filter family=10 entries=33 [ 88.447198] audit: type=1325 audit(1723690776.805:193): table=filter family=10 entries=33 [ 88.456182] audit: type=1325 audit(1723690776.814:194): table=filter family=2 entries=51 [ 88.466235] audit: type=1325 audit(1723690776.824:195): table=filter family=10 entries=37 [ 88.474956] audit: type=1325 audit(1723690776.833:196): table=filter family=2 entries=46 [ 88.483660] audit: type=1325 audit(1723690776.842:197): table=filter family=10 entries=26 [ 97.372498] audit_printk_skb: 294 callbacks suppressed [ 97.372770] audit: type=1325 audit(1723690785.716:296): table=filter family=2 entries=47 [ 97.380638] audit: type=1325 audit(1723690785.724:297): table=filter family=2 entries=47 [ 97.389314] audit: type=1325 audit(1723690785.733:298): table=filter family=2 entries=47 [ 97.397200] audit: type=1325 audit(1723690785.741:299): table=filter family=10 entries=33 [ 97.405329] audit: type=1325 audit(1723690785.749:300): table=filter family=10 entries=33 [ 97.414452] audit: type=1325 audit(1723690785.758:301): table=filter family=10 entries=33 [ 97.422948] audit: type=1325 audit(1723690785.767:302): table=filter family=2 entries=51 [ 97.431053] audit: type=1325 audit(1723690785.775:303): table=filter family=10 entries=37 [ 97.439426] audit: type=1325 audit(1723690785.783:304): table=filter family=2 entries=46 [ 97.447742] audit: type=1325 audit(1723690785.791:305): table=filter family=10 entries=26 [ 99.453112] docker0: port 1(docker3a7b80a) entered forwarding state [ 99.581294] docker0: port 2(docker66eaf2b) entered forwarding state

RROrg / rr

Shutdown(Power off) fail issues #2287