search

RTXI / rtxi

Tutorials, FAQs, and more at http://rtxi.org/docs
GNU General Public License v3.0
53 stars 15 forks source link

Low performance during Xenomai latency test #112

Closed cpalvarezb closed 7 years ago

cpalvarezb commented 7 years ago

Hi, we are setting up a new dynamic clamp system in our lab. I have tried two computers (old processors) to see if the performance was good enough, but the latency tests show long latencies compared to the example you have in the installation page. I have uploaded the two performance plots. Would you recommend moving to a more recent processor and better graphics card?

test_rt_plot inspiron test_rt_plot optiplex

Thank you,

Claudia

Basic Information:

RTXI Version: Installed from Live CD?:

Error Description:

What happened?

What was supposed to happen?

What steps will trigger the error?

Error Message:

Copy error messages and terminal output between the two braces below.

yapatel commented 7 years ago

How are you installing RTXI? Is this with the LiveCD or a manual installation?

cpalvarezb commented 7 years ago

Hi, thank you for your reply. I installed RTXI following the directions for standard installation (LiveCD). It is now installed in the computer not running from the LiveCD. I could try the custom installation to see if performance is improved.

yapatel commented 7 years ago

Can you please run "lspci -vvv" in a terminal and paste the output here?

cpalvarezb commented 7 years ago

00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Dell Device 027f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities:

00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe900000-feafffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport

00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03) Subsystem: Dell Device 027f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 50 Region 0: Memory at f0400800 (64-bit, non-prefetchable) [size=16] Capabilities: Kernel driver in use: mei

00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: Dell Device 027f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at fe80 [size=8] Region 1: I/O ports at fe90 [size=4] Region 2: I/O ports at fea0 [size=8] Region 3: I/O ports at feb0 [size=4] Region 4: I/O ports at fef0 [size=16] Capabilities: Kernel driver in use: ata_generic

00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) (prog-if 02 [16550]) Subsystem: Dell Device 027f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at ec98 [size=8] Region 1: Memory at febd8000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: serial

00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02) Subsystem: Dell Device 027f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 48 Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at febd9000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at ecc0 [size=32] Capabilities: Kernel driver in use: e1000e

00:1a.0 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 027f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff20 [size=32] Capabilities: Kernel driver in use: uhci_hcd

00:1a.1 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 027f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ff00 [size=32] Capabilities: Kernel driver in use: uhci_hcd

00:1a.2 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 027f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at fc00 [size=32] Capabilities: Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device 027f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at febda000 (32-bit, non-prefetchable) [size=1K] Capabilities: Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02) Subsystem: Dell Device 027f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 52 Region 0: Memory at febdc000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fe800000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fe700000-fe7fffff Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 027f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at ff80 [size=32] Capabilities: Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 027f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ff60 [size=32] Capabilities: Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device 027f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff40 [size=32] Capabilities: Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device 027f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K] Capabilities: Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities:

00:1f.0 ISA bridge: Intel Corporation 82801JD (ICH10D) LPC Interface Controller (rev 02) Subsystem: Dell Device 027f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Capabilities: Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 82801JD/DO (ICH10 Family) SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 027f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 49 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fe10 [size=4] Region 2: I/O ports at fe20 [size=8] Region 3: I/O ports at fe30 [size=4] Region 4: I/O ports at fec0 [size=32] Region 5: Memory at f0400000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller (rev 02) Subsystem: Dell Device 027f Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 9 Region 0: Memory at febdb000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at ece0 [size=32]

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV620 LE [Radeon HD 3450] (prog-if 00 [VGA controller]) Subsystem: Dell OptiPlex 980 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at dc00 [size=256] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: Kernel driver in use: radeon

yapatel commented 7 years ago

It looks like you have all the right hardware and drivers. Can you paste the output of the following command:

cat /proc/cpuinfo

cpalvarezb commented 7 years ago

processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping : 10 microcode : 0xa07 cpu MHz : 2992.370 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority bogomips : 5984.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping : 10 microcode : 0xa07 cpu MHz : 2992.370 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority bogomips : 5984.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

yapatel commented 7 years ago

I recommend trying the custom configuration as described here - the generic configuration we provide with the LiveCD is not optimal for your processor.

cpalvarezb commented 7 years ago

Hi,

I run the custom installation but got stuck after running ./install_rt_kernel.sh

The process stops with an error and the window to edit the kernel configuration doesn't pop up. Here is the whole output:

-----> Setting up variables. -----> Environment configuration complete. -----> Downloading Linux kernel. --2017-06-16 12:51:10-- https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.8.13.tar.bz2 Resolving www.kernel.org (www.kernel.org)... 147.75.196.57, 2604:1380:1:3600::3 Connecting to www.kernel.org (www.kernel.org)|147.75.196.57|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 84584333 (81M) [application/x-bzip2] Saving to: ‘linux-3.8.13.tar.bz2’

100%[======================================>] 84,584,333 12.0MB/s in 11s

2017-06-16 12:51:22 (7.22 MB/s) - ‘linux-3.8.13.tar.bz2’ saved [84584333/84584333]

-----> Downloading Xenomai. --2017-06-16 12:51:35-- https://xenomai.org/downloads/xenomai/stable/xenomai-2.6.4.tar.bz2 Resolving xenomai.org (xenomai.org)... 212.83.143.187 Connecting to xenomai.org (xenomai.org)|212.83.143.187|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 21193853 (20M) [application/x-bzip2] Saving to: ‘xenomai-2.6.4.tar.bz2’

100%[======================================>] 21,193,853 7.24MB/s in 2.8s

2017-06-16 12:51:38 (7.24 MB/s) - ‘xenomai-2.6.4.tar.bz2’ saved [21193853/21193853]

-----> Downloads complete. -----> Patching kernel. checking file arch/x86/Kconfig checking file arch/x86/Kconfig.debug checking file arch/x86/include/asm/apic.h checking file arch/x86/include/asm/apicdef.h checking file arch/x86/include/asm/debugreg.h checking file arch/x86/include/asm/desc.h checking file arch/x86/include/asm/fpu-internal.h checking file arch/x86/include/asm/hw_irq.h checking file arch/x86/include/asm/i8259.h checking file arch/x86/include/asm/ipi.h checking file arch/x86/include/asm/ipipe.h checking file arch/x86/include/asm/ipipe_32.h checking file arch/x86/include/asm/ipipe_64.h checking file arch/x86/include/asm/ipipe_base.h checking file arch/x86/include/asm/irq_vectors.h checking file arch/x86/include/asm/irqflags.h checking file arch/x86/include/asm/mmu_context.h checking file arch/x86/include/asm/page_64_types.h checking file arch/x86/include/asm/processor.h checking file arch/x86/include/asm/special_insns.h checking file arch/x86/include/asm/switch_to.h checking file arch/x86/include/asm/thread_info.h checking file arch/x86/include/asm/traps.h checking file arch/x86/include/asm/tsc.h checking file arch/x86/kernel/Makefile checking file arch/x86/kernel/apic/apic.c checking file arch/x86/kernel/apic/apic_flat_64.c checking file arch/x86/kernel/apic/io_apic.c checking file arch/x86/kernel/apic/ipi.c checking file arch/x86/kernel/apic/x2apic_cluster.c checking file arch/x86/kernel/apic/x2apic_phys.c checking file arch/x86/kernel/cpu/common.c checking file arch/x86/kernel/cpu/mtrr/cyrix.c checking file arch/x86/kernel/cpu/mtrr/generic.c checking file arch/x86/kernel/dumpstack_32.c checking file arch/x86/kernel/dumpstack_64.c checking file arch/x86/kernel/entry_32.S checking file arch/x86/kernel/entry_64.S checking file arch/x86/kernel/hpet.c checking file arch/x86/kernel/i387.c checking file arch/x86/kernel/i8253.c checking file arch/x86/kernel/i8259.c checking file arch/x86/kernel/ipipe.c checking file arch/x86/kernel/irq.c checking file arch/x86/kernel/irqinit.c checking file arch/x86/kernel/kgdb.c checking file arch/x86/kernel/pcspeaker.c checking file arch/x86/kernel/process.c checking file arch/x86/kernel/process_32.c checking file arch/x86/kernel/process_64.c checking file arch/x86/kernel/ptrace.c checking file arch/x86/kernel/smp.c checking file arch/x86/kernel/smpboot.c checking file arch/x86/kernel/traps.c checking file arch/x86/kernel/tsc.c checking file arch/x86/kernel/vm86_32.c checking file arch/x86/kernel/vsyscall_64.c checking file arch/x86/kernel/xsave.c checking file arch/x86/kvm/svm.c checking file arch/x86/kvm/vmx.c checking file arch/x86/kvm/x86.c checking file arch/x86/lib/mmx_32.c checking file arch/x86/lib/thunk_64.S checking file arch/x86/lib/usercopy.c checking file arch/x86/mm/fault.c checking file arch/x86/mm/tlb.c checking file arch/x86/platform/uv/tlb_uv.c checking file drivers/clocksource/Makefile checking file drivers/clocksource/i8253.c checking file drivers/clocksource/ipipe_i486_tsc_emu.S checking file drivers/gpu/drm/i915/i915_gem.c checking file drivers/pci/htirq.c checking file drivers/cpuidle/Kconfig checking file drivers/tty/serial/8250/8250.c checking file fs/exec.c checking file fs/proc/array.c checking file include/asm-generic/atomic.h checking file include/asm-generic/bitops/atomic.h checking file include/asm-generic/cmpxchg-local.h checking file include/asm-generic/percpu.h checking file include/ipipe/setup.h checking file include/ipipe/thread_info.h checking file include/linux/clockchips.h checking file include/linux/clocksource.h checking file include/linux/ftrace.h checking file include/linux/hardirq.h checking file include/linux/i8253.h checking file include/linux/ipipe.h checking file include/linux/ipipe_base.h checking file include/linux/ipipe_compat.h checking file include/linux/ipipe_debug.h checking file include/linux/ipipe_domain.h checking file include/linux/ipipe_lock.h checking file include/linux/ipipe_tickdev.h checking file include/linux/ipipe_trace.h checking file include/linux/irq.h checking file include/linux/irqdesc.h checking file include/linux/irqnr.h checking file include/linux/kernel.h checking file include/linux/kvm_host.h checking file include/linux/preempt.h checking file include/linux/rwlock.h checking file include/linux/rwlock_api_smp.h checking file include/linux/sched.h checking file include/linux/spinlock.h checking file include/linux/spinlock_api_smp.h checking file include/linux/spinlock_up.h checking file include/uapi/asm-generic/mman-common.h checking file include/uapi/asm-generic/resource.h checking file include/uapi/linux/resource.h checking file init/Kconfig checking file init/main.c checking file kernel/Makefile checking file kernel/debug/debug_core.c checking file kernel/debug/gdbstub.c checking file kernel/exit.c checking file kernel/fork.c checking file kernel/ipipe/Kconfig checking file kernel/ipipe/Kconfig.debug checking file kernel/ipipe/Makefile checking file kernel/ipipe/compat.c checking file kernel/ipipe/core.c checking file kernel/ipipe/timer.c checking file kernel/ipipe/tracer.c checking file kernel/irq/chip.c checking file kernel/irq/generic-chip.c checking file kernel/irq/irqdesc.c checking file kernel/irq/manage.c checking file kernel/lockdep.c checking file kernel/panic.c checking file kernel/power/hibernate.c checking file kernel/printk.c checking file kernel/sched/clock.c checking file kernel/sched/core.c checking file kernel/signal.c checking file kernel/spinlock.c checking file kernel/time/clockevents.c checking file kernel/time/clocksource.c checking file kernel/time/tick-common.c checking file kernel/time/tick-sched.c checking file kernel/timer.c checking file kernel/trace/Kconfig checking file kernel/trace/ftrace.c checking file kernel/trace/trace.c checking file kernel/trace/trace_clock.c checking file kernel/trace/trace_functions.c checking file kernel/trace/trace_functions_graph.c checking file lib/Kconfig.debug checking file lib/atomic64.c checking file lib/bust_spinlocks.c checking file lib/ioremap.c checking file lib/smp_processor_id.c checking file mm/Kconfig checking file mm/memory.c checking file mm/mlock.c checking file mm/mmap.c checking file mm/mmu_context.c checking file mm/mprotect.c checking file mm/vmalloc.c HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/zconf.lex.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf using config: '/boot/config-4.4.0-31-generic' 8250_fintek config not found!! input_leds config not found!! irqbypass config not found!! mei_me config not found!! amdkfd config not found!! snd_hda_core config not found!! snd_hda_codec_generic config not found!! *

Console input/output is redirected. Run 'make oldconfig' to update configuration.

make[1]: [localmodconfig] Error 1 make: [localmodconfig] Error 2

yapatel commented 7 years ago

Hi Claudia - it would be best if I could take a look at your system. Can you please install TeamViewer and send the ID/password to yogi at rtxi.org?

Please do not post them to GitHub!