Shutters not moving despite commands being sent

[familyafriends]

Hi Rainer,

we wrote on the homeassistant community forum where you asked me to open an issue here. Recap:

• I deleted every remote that was saved to the shutters except the master remote, according to the instructions and heard clacking sounds as confirmation.
• I put the shutter into pairing mode and send the pairing command via home assistant. I heard clacking sounds as confirmation. So I assume I paired the shutters with my stick.
• My recent attempts have been done with "RolladenHWR" on channel 1:5. I have yet to repair all the other shutters to the stick.

I have never done this before so I hope I can provide all the info you need.

My config:

cover:
  - platform: becker
    device: "/dev/ttyACM1"
    filename: "my-centronic-stick.db"
    covers:
      kitchen:
        friendly_name: "RollladenKüche"
        channel: "2:1"
        intermediate_position: off
        travelling_time_up: 22.75
        travelling_time_down: 19.45
        remote_id: "7A1A2:1"
      dining_room:
        friendly_name: "RollladenEZ1"
        channel: "2:2"
        intermediate_position: off
        travelling_time_up: 29.5
        travelling_time_down: 25.25
        remote_id: "7A1A2:2"
      dining_room2:
        friendly_name: "RolladenEZ2"
        channel: "2:3"
        intermediate_position: off
        travelling_time_up: 33.6
        travelling_time_down: 23.75
        remote_id: "7A1A2:3"
      living_room:
        friendly_name: "RollladenWZ"
        channel: "2:4"
        intermediate_position: off
        travelling_time_up: 30
        travelling_time_down: 26.5        
      bedroom:
        friendly_name: "RollladenSZ"
        channel: "1:3"
        intermediate_position: off
        travelling_time_up: 18.65
        travelling_time_down: 18
        remote_id: "7A1A3:1"
      bathroom:
        friendly_name: "RollladenBad"
        channel: "1:4"
        intermediate_position: off
        travelling_time_up: 30
        travelling_time_down: 26.5
        remote_id: "7A1A3:2"
      storage_room:
        friendly_name: "RollladenHWR"
        channel: "1:5"
        intermediate_position: off
        travelling_time_up: 18.65
        travelling_time_down: 17.8  
        remote_id: "7A1A3:3"

logger:
  default: info
  logs:
    custom_components.becker: debug

my-centronic-stick.db: 'utf-8' codec can't decode byte 0x82 in position 27: invalid start byte

examples from my home-assistant.log INFO (MainThread) [homeassistant.setup] Setup of domain becker took 0.0 seconds

DEBUG (Thread-2) [custom_components.becker.pybecker.becker_helper] BeckerCommunicator thread started.

Master remote is being received in multiple instances like this one here: DEBUG (Thread-2) [custom_components.becker.pybecker.becker_helper] Received packet: unit_id: 6A29B, channel: 0, command: DOWN, argument: 8, packet: b'\x020000000002010B00000000006A29B0210100004839\x03' DEBUG (Thread-2) [custom_components.becker.rf_device] Received packet for dispatcher DEBUG (MainThread) [custom_components.becker.cover] RollladenEZ1 received a packet from dispatcher DEBUG (MainThread) [custom_components.becker.cover] RollladenEZ1 is travelling from position 100 to 0 in 25.25 seconds DEBUG (MainThread) [custom_components.becker.cover] RollladenEZ1 update ha-state now DEBUG (MainThread) [custom_components.becker.cover] RollladenEZ1 setup update ha-state callback in 25.25 seconds

Me sending out the command with the stick, where nothing happens: DEBUG (MainThread) [custom_components.becker.cover] RollladenHWR is travelling from position 100 to 0 in 17.8 seconds DEBUG (MainThread) [custom_components.becker.cover] RollladenHWR update ha-state now DEBUG (MainThread) [custom_components.becker.cover] RollladenHWR setup update ha-state callback in 17.8 seconds DEBUG (Thread-2) [custom_components.becker.pybecker.becker_helper] Sent packet: unit_id: 1737B, channel: 5, command: DOWN, argument: 0, packet: b'\x020000000002010B00620000001737B021010500402E\x03'

If there is anything else you need, please let me know and I will try my best to provide the information needed.

Thanks for having a look at this in the first place!!! Steffen

[RainerStaude]

Duplicate