Since 2.17 the icons are not vertically centered

[NiklasVoigt]

Describe the bug Since 2.17 the icons are not vertically centered

To Reproduce

Expected behavior

Details of your device:

• Device: TS100
• Release: 2.17
• Power adapter being used:
• If this is an accelerometer related issue, please include its model number here:

Additional context

[River-Mochi]

what language pack are you using? could you please provide photos of the differences or a video link showing this on 2.17 Photos of previous 2.16 icons also for comparison.

Not sure which icons you are referring to, photos uploaded here would help a lot.

[the-remmer]

Hello, I'm not the author of the issue but I think noticed the same thing. It's the whole UI that is not centered, not just specific icons. Here are some photos:

https://imgur.com/a/YbKMp1d

I'm on v2.17.923915C on a TS80P, with the TS80P_EN language pack.

[Ralim]

You appear to have a non-standard screen.

The standard screen is a 96*16 WHITE OLED module.

[Ralim]

I'm not sure what screen has been fitted to yours it may use slightly different pixel offsets I'm guessing.

Can you share that test bootup logo and I'll test it out here, could still be a bug

[the-remmer]

Can you share that test bootup logo

Here it is: https://i.imgur.com/SrgD8I1.png

[River-Mochi]

are these official miniware soldering irons or Clones/fake copies?

[discip]

@NiklasVoigt Could you please confirm, if your display looks similar to the one @the-remmer posted pictures of?

@the-remmer This is due to the way this OLED display is built! On my device it looks exactly the same, except for it being white instead of blue.

See the difference in the length of the green bars I put there? Actually if you happen to have a microscope at hand, you will be able to observe the number of the actual pixels or at least see if there are any unilluminated pixels below the test image.

• If you align the physical body of the display exactly in the center of the PCB, the illuminated part of it will be shifted upwards.

  So if you want it to be vertically centered , you will have to open up your device see here (https://github.com/Ralim/IronOS/issues/630#issuecomment-809748658) and try to shift the display down a bit (You could use the measurements provided in the picture / pdf to figure out by which amount.). But I doubt this will work, since the ribbon cable is pretty short.

This applies to all the miniware devices (TS100, TS80[P], MHP30), since they all come with this kind of display.

So nothing unusual I guess. Except for the color of the pixels. There are 3 to choose from out there (white, sky blue & yellow).

WEO009616A.pdf

So this issue can be closed right? 😊

[the-remmer]

are these official miniware soldering irons or Clones/fake copies?

It's probably a clone, I got it from AliExpress.

@discip thanks for the info, you are right I checked with a magnifier and it's the active area itself that is not centered.

I'm sorry, I wanted to be helpful but I realize now that it was probably not the same thing that the original issue author had encountered.

[discip]

@Ralim Seems that the OP is not interested anymore, since he does not answer. Please close this issue. 😊

thanks