search

Ralim / IronOS

Open Source Soldering Iron firmware
https://ralim.github.io/IronOS/
GNU General Public License v3.0
7.14k stars 712 forks source link

Can't upload logo to sequre sq-001 #1327

Closed bananafan2015 closed 1 year ago

bananafan2015 commented 2 years ago

Hi, I recently bought a sequre sq-001 and flashed it with the latest release of iron os(2.18). After that, I wanted to add a custom logo so using the python script I made one but no matter what I tried when I pasted the file it reboots and renames the file to .NO

To Reproduce Steps to reproduce the behavior:

  1. Plug in soldering iron in dfu mode
  2. Paste converted png.hex file in poped up drive
  3. Drive reboots with a file with .NO extension

Expected behavior After pasting the file in the d drive called firmware drive should reboot and the pasted file should be named .OK

Details of your device:

Additional context

Ralim commented 2 years ago

To confirm, which python script did you use (was it this one)?

Any chance you can attach the logo you tried? What DFU loader version does it show on the screen? Have you tried any of the premade logo's from that repo?

bananafan2015 commented 2 years ago

Hi, thanks for the response. I used the python script you posed. About the dfu version I have no idea how to check when I plug in while pressing A, it doesn't show what version of dfu it has. I haven't tried any premade logos since their in png format and I don't know how to use the python script (my friend ran it for me) he used this command "python3 img2logo.py csa.png out -m"

csa .

this is what I shows when plugging in while pressing a 20220714_152542

bananafan2015 commented 2 years ago

Hi I understand that you may be busy but I've been waiting for an answer to my latest comment for 21 days. Could you take a look and help me with my problem.

Ralim commented 2 years ago

The SQ-001 is not supported. And their bootloader has different quirks to the Miniware one. I dont have one and I have no idea why their DFU firmware would reject this.

discip commented 2 years ago

Would your bootloader fix that, or is this device not supported?

Ralim commented 2 years ago

The device is not officially supported; it should work but I have zero idea around the recovery if it goes wrong etc.

bananafan2015 commented 2 years ago

Ok thanks for the help I guess I'll just use it without a custom logo.Also what bootloader is discip talking about?

discip commented 2 years ago

@bananafan2015 Here you go: https://github.com/Ralim/IronOS-dfu

discip commented 1 year ago

@bananafan2015 Did you get this going? Please do not forget to close if this was solved. 😊

bananafan2015 commented 1 year ago

Unfortunately not,i dont want to risk bricking my iron so I'm closing the problem.