search

Ralim / IronOS

Open Source Soldering Iron firmware
https://ralim.github.io/IronOS/
GNU General Public License v3.0
7.14k stars 712 forks source link

cannot access settings menu #139

Closed canc3rmoon closed 6 years ago

canc3rmoon commented 6 years ago

Hi, Just got a brand new unit today with DFU is 3.43 and stock Firmware 2.12. I've flashed the latest firmware (window10, thinkpad t530), apparently with success. Each time I get a .RDY result. Yet I cannot enter the settings when pressing the button closest to the tail. Flashing older firmwares resulst in showing Firwmare 2.12. Any suggestions pointing me in the right direction is highly appreciated.

jonnieZG commented 6 years ago

Does it work with the old firmware? You first have to verify that the button is ok.

Mrkvozrout commented 6 years ago

You can try the newest official firmware 2.17. Open following link and download the APPV217.rar www.minidso.com/forum

canc3rmoon commented 6 years ago

Thank you. The button does click, but does not open the settings menu on the orignially installed firmware. the button seems to be ok, since I can at least calibrate the tip by holding button 1&2 simultaneously. Flashing 2.17 results in .RDY, but upon booting shows fw 2.12 and still no access to menu.

jonnieZG commented 6 years ago

So you have a faulty button, or a faulty connection. Either try to fix it yourself, or flash back the original firmware and activate your warranty. I'd go for the second option.

canc3rmoon commented 6 years ago

Seems like I have a DOA. Will opt for warranty. Thx for your help.