Info bar stays visible after time seek and pause

[silleh]

Using 1.6 embedded on an Asus Chromebox

The info bar al the bottom of the screen stays visible after using time seek. I also noticed now that it stays when using the pause button. (Obviously the bars stays when resuming the video...)

This happens with different media, and it is random. Sems to fix itself with a reboot only to return again later

[Kwiboo]

How do you seek, pause and continue playback? Keyboard/remote/plex app? A short description with steps describing what buttons you press, what happens and what you expect to happen etc would be helpful.

Example:

1. Start playback of video and no osd is shown
2. Press right on keyboard to seek +30s, osd is shown
3. Playback continues after seek and osd is still shown after 10s

Edit: Is it only using time-seek or also regular skip forward/backward? I noticed similar issue in a test-build but haven't seen similar issue in a while.

[silleh]

I am using a Harmony remote and an USB IR receiver - nothing programmed, works out of the box.

1 - Pressing pause on the remote, pauses the video, showing the osd. Pressing play, resumes the video but the OSD stays 2 - Pressing the left arrow (keyboard left) seeks -15s, video shows and osd stays. 3 - Using the rewind function on the remote, rewinds the movie, osd shows and stays.

So its time seek and regular skip forward/backward.

After rebooting the Chromebox, the osd is back to normal. I have just pressed the left button 15 times or so and normal behavior.

[NedtheNerd]

As this appears to be functioning correctly, closing issue.

[silleh]

Apologies - but this keeps returning - the reboot will only fix it temporary.

[NedtheNerd]

This is not normal behaviour, the issue cannot be replicated, a new release is due out later today, can you please create a new install for this rather than taking the update route, you may have some corruption.

[silleh]

Willdo - thanks

[silleh]

Just to bring this up - I've installed (clean) 1.6.1 and the bar stays visible when using pause/resume/fforward etc..

Should a new issue be opened ?

[Kwiboo]

What skin is uses and can you reproduce this issue using default skin with just the keyboard using: p (play/pause), left, right keys? Would like to rule out remote/keymap issue. Are you using ethernet or wifi? Try to reproduce issue on ethernet if you use wifi.

Edit: Also enable debug logging in preferences and add a link to your log-file from the period when you seek and at least 1-2 minutes after the osd has stayed on screen.

[silleh]

Skin is the original black skin - problem reproduced with keyboard.

Box was on wifi - took me some time to put it on ethernet, but makes no difference (wifi is 300mb and ethernet is 1gb)

At 19:46:42 T:140366198073088 0 the video starts. At 19:46:51 T:140367595108352 I rewind pressing left You can find multiple presses.

I left it running for almost 2 minutes - strangely, the osd disapeared about a minute later ? (cant find it in log) plexhometheater.txt

[NedtheNerd]

Can you change to the default OpenPHT skin and advise whether the issue is still there.

[silleh]

I am using the default skin (the one from the log file)

Currently using the Black skin to see if I have the same issue

[Massaguana]

Here are an behave like the OSD stay visible... but other. some times the OSD is invisible when i seek... the seek are done but the OSD are invisible. Press M on Keyboard the OSD don´t comes up. I must Restart my ChromeBox and OSD are working fine... i use the Black Skin...

[silleh]

Confirm that this also happens with Black Skin - same as Massaguana - sometimes the OSD doesnt even come up.

using keyboard and remote buttons (red, blue, green etc)

[vnenovd]

I can confirm this on Intel NUC running Ubuntu 14.04 LTS with OpenPHT 1.6.2 (both compiled and downloaded the .deb package). Sometimes the OSD will not show at all, sometimes it shows up after few minutes. It happens on the default and Black skin as well. A restart of OpenPHT fixes the issue until it reappears. It started happening since the first 1.6 release. Rel. 1.5.2 did not have this issue.

[MrPedroG]

happening to me too osd stays on permanently while playing im using 1.6.2 running on win 7 x64 normally exiting to windows and reopening avoids issue for the next first play

[MrPedroG]

i can confirm this was happenning too in two prev. releases before 1.6.2

[gigelu]

Using OpenPHT (1.6.2) on a QNAP, controlled with QRemote (android app). Can reproduce every single time, when I use play/pause/seek, the OSD comes up and never closes, I have to restart the video for it to disappear.

Edit: I bought a remote control for my QNAP and now I can hit the back button on it and the OSD closes.

[bjay1404]

I am having the same problem as well!

[normanu]

Same problem here aswell. I'm running latest OpenPHT git compiled on Arch Linux box. I use the Apple remote for control, through the keymap table. When using the OSD for pausing or seeking it remains and doesn't hide anymore.

Stopping the movie and restarting it again then everything is fine until you pause again. Bit annoying to have to stop the movie everytime if you want to pauze. (problem is not in the 1.5 build)

[silleh]

I have reverted back to 1.6, and applied this 'fix': VSYNC option set to Let the driver choose

[evtk]

Having exact same issue. Any progress on this? Thanks!

[silleh]

No not yet. See my fix above, 1.6 has been fine!

[bjay1404]

I would just wipe the rasplex and restore most recent release.

On Oct 25, 2016 2:29 PM, "silleh" notifications@github.com wrote:

No not yet. See my fix above, 1.6 has been fine!

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/RasPlex/OpenPHT/issues/76#issuecomment-256127673, or mute the thread https://github.com/notifications/unsubscribe-auth/AK2zt649y0uKgAj42msUnpC09AmXQ9DOks5q3kplgaJpZM4IzntL .

[evtk]

@bjay1404 that just actually worked. Thanks. Running 1.6.2 now and not having issues with the info bar anymore..

[scott451]

i am still having this problem with rasplex 1.8.0.148 but only on my rpi3. an identical install on two rpi2 does not have this issue.

i just completed a clean install and the problem remains. help !

[asm0dey]

Same on plex for Kodi 0.1.6