Closed aaronorwick closed 8 years ago
I'm stuck at exactly the same point. This is all new to me, so I definitely need help!
Hi - is there anyone out there that has run into this and solved? Thanks!
Sorry - I meant to post back here. Bottom line is that alamode-setup file is hosed. Replace it with the one here and you should be good to go.
"Been getting lots of help the last couple of days via PM... thought I'd return the favor.
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
Uploading Wheezy, the good alamode sketch, and anything else folks think would be helpful..."
I'm having the same issue. can anyone assist?
Huhwha, the link doesn't work
First of all - Raspberry Pints is freaking sweet! A relative beginner such as myself was able to get most of this up and running. The only part that I haven't been able to get going is the alamode setup to add on flow meters. For some reason I get an error when trying to run the setup - what am I doing wrong?
pi@raspberrypi ~ $ tar -xvzf alamode-setup.tar.gz alamode-setup/ alamode-setup/80-alamode.rules alamode-setup/arduino-setup alamode-setup/avrdude alamode-setup/avrdude.conf alamode-setup/boards.txt alamode-setup/inittab alamode-setup/jessie-setup alamode-setup/setup pi@raspberrypi ~ $ cd alamode-setup pi@raspberrypi ~/alamode-setup $ sudo ./setup sudo: unable to execute ./setup: No such file or directory pi@raspberrypi ~/alamode-setup $ ls 80-alamode.rules avrdude boards.txt jessie-setup arduino-setup avrdude.conf inittab setup
Thanks for any help that can be offered - cheers!