Find correct firmaware for sonoff switch T1 2ch

RavenSystem / esp-homekit-devices

Advanced firmware to add native Apple HomeKit and custom configurations, compatible with any SoC based on ESP32, ESP32-S, ESP32-C and ESP8266 series. (Shelly, Sonoff, Electrodragon, Tuya...)

Other

2.76k stars 361 forks source link

Find correct firmaware for sonoff switch T1 2ch #481

Closed ConradoP closed 5 years ago

ConradoP commented 5 years ago

Hello, I am trying to put the firmware for sonoff t1 2ch, but it is showing 4ch when I synchronize with home app. What is the correct firmware for switch t1 2ch?

Where can I find the right firmware to download? Thank you

Thank you

walvespit commented 5 years ago

Which device type are you setting ?

ConradoP commented 5 years ago

the device is Sonoff t1 US 2channel

walvespit commented 5 years ago

the device is Sonoff t1 US 2channel

i meant how did you configured at eve ? you should put device type 2 ! I have one exactly like yours and it works fine!

ConradoP commented 5 years ago

I used a firmware that I believe is not the correct one. because this one that I used works perfectly in sonoff 4ch (pro r2). I understand that I should use a specific firmware for T1, and I don't know where to download it. My question is, where is the correct firmware for T1?

walvespit commented 5 years ago

I used a firmware that I believe is not the correct one. because this one that I used works perfectly in sonoff 4ch (pro r2). I understand that I should use a specific firmware for T1, and I don't know where to download it. My question is, where is the correct firmware for T1?

If you're talking about Ravencore firmware, the firmware is the same, the only thing that changes its the configuration inside eve, you must change device type to 2.

Now if you're talking about HAA, the firmware is also the same, you just need to change the JSON config.

ConradoP commented 5 years ago

Thanks, I'm using revencore, where do I add option 2?

The steps I follow are:

1 - Flash Erase 2 - ./flash.sh sonoff_4ch.bin

Where do I add device 2?

walvespit commented 5 years ago

Thanks, I'm using revencore, where do I add option 2?

The steps I follow are:

1 - Flash Erase 2 - ./flash.sh sonoff_4ch.bin

Where do I add device 2?

Are you sure you using RavenCore? i dont recognize this sonoff_4ch.bin

take a look at https://github.com/RavenSystem/esp-homekit-devices/wiki/Installation

ConradoP commented 5 years ago

I'm sorry, this firmware is main.bin but I renamed it.

I downloaded it right here by ravencore.

Doesn't the link you pass say where I point device 2?

i am not understanding how to change the firmware to different devices

ConradoP commented 5 years ago

I saw in the link the steps:

1 - firmware download 2- Connect cable 3- erase flash 4- burn the firmware ...

when I add device 2 to the firmware to understand that it is t1?

walvespit commented 5 years ago

I'm sorry, this firmware is main.bin but I renamed it.

I downloaded it right here by ravencore.

Doesn't the link you pass say where I point device 2?

i am not understanding how to change the firmware to different devices

oh okay, so after you done flashing the firmware, you're going to your home app, add acessory and add the sonoff there etc, after that, you download this app "Eve for homekit", you go to acessories, than you gonna see an setup option for the sonoff device there, in this setup option there will be a "device type" option, you change it to 2 and apply and its done

ConradoP commented 5 years ago

THanksssssssssssssssssssssssssssss