Raxone / amlogic-usbdl_s905_s905x_s905w

Dump Bootrom(BL1),Efuse s905,s905x,s905x-H,s905w
GNU General Public License v3.0
12 stars 3 forks source link

S905X Can't dum bootrom #1

Open Lishoo opened 7 months ago

Lishoo commented 7 months ago

Hi, I'm trying to dump the bootrom with your script, but it looks like it fails. The serial debug looks like this ` GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0; TE: 55200

BL2 Built : 11:58:42, May 27 2017. gxl gc3c9a84 - xiaobo.gu@drom eMMC, src: 0x00010200, des: 0plat: p212 vari: 2g Find match dtb: 1 parts: 10 00: logo 0000000002000000 1 01: recovery 0000000002000000 1 02: rsv 0000000000800000 1 03: tee 0000000000800000 1 04: crypt 0000000002000000 1 05: misc 0000000002000000 1 06: boot 0000000002000000 1 07: system 0000000080000000 1 08: cache 0000000020000000 2 09: data ffffffffffffffff 4 init_part() 293: PART_TYPE_AML eMMC/TSD partition table have been checked OK! check pattern success mmc env or: serial reboot_mode=cold_boot hpd_state=0 cvbs performance type = 7, table = 0 [store]To run cmd[emmc dtb_read 0x1000000 0x40000] _verify_dtb_checksum()-917: calcset CFG

ID[16]

ID[16] BULKcmd[bootloader_is_old] [infBULKcmd[erase_bootloader] [infoBULKcmd[reset] sleep - delay execution for some time

Usage: sleep N

set vcck to 1070 mv set vddee to 1070 mv Board ID = 12 CPU clk: 1200MHz Skip usb!

The script output `S905X-H Dump BL1 AmlUsbIdentifyHost This firmware version is 2-2-0-0-0-1-0 Setting PWD..Pwd returned 16 Dump BootRom 0xD9040000 Target: s905x-h

Raxone commented 7 months ago

Please more info,box name and like that. I don't have s905x box. This script (S905X-H Dump BL1) is for Mi Box S (MDZ-22-AB) and this box use password for usb. Try comment line in scripts/s905x-h/dump_bootrom.sh and dump_efuse.sh from ../bin/update password ../usb_password/password.bin to

../bin/update password ../usb_password/password.bin.