Getting avrdude: stk500_getsync(): not in sync: resp=0x00 while using FTDI on a razor board without firmware

Razor-AHRS / razor-9dof-ahrs

AHRS Firmware for the SparkFun 9DOF Razor IMU and SparkFun 9DOF Sensor Stick

Other

450 stars 264 forks source link

Getting avrdude: stk500_getsync(): not in sync: resp=0x00 while using FTDI on a razor board without firmware #48

Open DigitalGabriele opened 8 years ago

DigitalGabriele commented 8 years ago

Hello,

Just as the title claims, I have followed all the instructions and when I tried to upload the verified code to razor board, it would keep on complaining about "avrdude: stk500_getsync(): not in sync: resp=0x00". Furthermore, it does not have any firmware on it. There is a chance that it may have been burnt but I would like to rule out other issues too.

Has anyone ever faced this issue?

maharshi114 commented 5 years ago

Yes! After using approximately four-month, suddenly the serial data not coming on Serial port. I upload the default code again and showing me the same problem.

Also, I upload Arduino Blink code but showing me the same problem.

@DigitalGabriele your problem is solved?

Thank you.

SoorajR-ai commented 7 months ago

Does this problem solved?

DigitalGabriele commented 6 months ago

No, I haven't found a solution. I still keep getting the same problem.