Open pingdynasty opened 9 years ago
Done as required, lid left open, screws in bag
Keyboard wiring etc.: Fit Touchkeys usb socket in rear panel. Fit MidiIO board in rear panel. Fit 2 x DPCO switches in rear panel. Wire existing keyboard usb power to touchkeys usb. Wire MidiIO TX/RX to keyboard TX/RX via switches.
Awaiting hardware, ordered today 7-7-15
Finished and boxed up
Todo: assemble next 3 octaves
@padski are we missing parts? The bottom three octaves are not connected to control boards.
Yes we need nice squidgy double-sided sticky things to replace the second-hand offcuts
but what about the control boards?
On 10/11/15 19:05, padski wrote:
Yes we need nice squidgy double-sided sticky things to replace the second-hand offcuts
— Reply to this email directly or view it on GitHub https://github.com/RebelTechnology/FortRebel/issues/43#issuecomment-155533240.
sticky stuff: 3M 4658F, from Viking Tapes
Very expensive are you sure? We only need a little.. can buy but will need to be a bit richer..:)
on Novation Impulse 61 keyboard, top octaves. Will get remaining 3 octaves of parts from Andrew at a future date.