The load can not work on my HW: msi b560m MB + i5-10400

[ghost]

Hi, First of all, thank you very much for the contributions of the project team members. I'm a newer to synology.

My hardware configuration is as follows:

• MB: MSI MAG B560M Mortar WiFi (with RTL8125b)

• CPU: i5-10400

  The 7.01 bootloader of 918+ I have downloaded from https://www.openos.org/threads/ds918-ds3615xs7-01.3529/. I have changed vid/pid/sn/mac, and it's not work for my physical equipment with UEFI mode. The output info stopped at 'Starting kernel' as follow:

I can neither find the device with synology assistant nor find the IP on my router. Is there any suggestions to me to mark it working.

[brucexo]

我也是……

[pocopico]

You need to recreate the image with latest intel drivers https://www.intel.com/content/www/us/en/support/articles/000005480/ethernet-products.html

[ghost]

Related issue: https://github.com/pocopico/rp-ext/issues/8

Add related driver and install successful, then reboot, the api show not_install and reinstall.

loop ...

any suggestion?

[pocopico]

Maybe an extension fails to load.

Start with the minimum required extensions and start adding one by one.

[ghost]

Ok, I will remove all inner drivers in redpill-load and only add intel driver. recreate the bootloader later. Thx pocopico (˘͈ᵕ ˘͈❀)

[ghost]

dmesg.log

@pocopico I think it may not be the problem of the driver, can you help me see where the problem is from the log?

I only have one HHD，and fresh install.

(*￣︶￣) TYVM

[pocopico]

Which extensions are you using ? I will try to verify

[ghost]

r8125