Reini60 / er9x

Automatically exported from code.google.com/p/er9x
0 stars 0 forks source link

AIL and THR switch always reported ON #700

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1. Flash er9x-r762
2. Turn TX on
3. Wait for alarm: Please reset switches, any key to skip with AIL and THR 
being the switches that are on, when they are not.

What is the expected output? What do you see instead?
Should be no error when switches are off

What version of the product are you using? On what operating system?
er9x-r762 FrSky, win 7

Please provide any additional information below.

Original issue reported on code.google.com by peter.gr...@osiria.net on 23 Jun 2012 at 12:42

GoogleCodeExporter commented 9 years ago
Another point: with the default firmware there is no such error (no telemetry)

Original comment by peter.gr...@osiria.net on 23 Jun 2012 at 12:59

GoogleCodeExporter commented 9 years ago
Same issue here (Frsky NT stable r 708)
Thr and Ail switch are not working (working with original firmware).

Switches are recognised as ON. 

Original comment by maoartl...@gmail.com on 2 Jul 2012 at 7:18

GoogleCodeExporter commented 9 years ago
If using the FrSky version you need to carry out the hardware mod relating to 
these two switches.

Original comment by michael....@mypostoffice.co.uk on 18 Jul 2012 at 5:47

GoogleCodeExporter commented 9 years ago
Where can I find out how to modify my tx for that?
Thanks.

Original comment by peter.gr...@osiria.net on 24 Jul 2012 at 3:40

GoogleCodeExporter commented 9 years ago
[deleted comment]
GoogleCodeExporter commented 9 years ago
Same issue using ER9x-FRSKY r708, please point me in the direction of the 
hardware mod relating to these two switches?

Original comment by JOSHUABE...@YAHOO.COM on 31 Dec 2012 at 3:37

GoogleCodeExporter commented 9 years ago
I have the same issue, i am running frsky version, r810.  the switches work, 
but everytime i power on I get the same error message.   

Original comment by davidhit...@gmail.com on 29 Mar 2014 at 3:10

GoogleCodeExporter commented 9 years ago
When did you get the TelemetrEZ? There was a problem the the firmware on 
earlier TelemetrEZ boards that caused the THR and AIL switch to not respond for 
the first 15 seconds. If you flash r86 of the TelemetrEZ firmware to it, the 
problem is fixed.

Original comment by michael....@mypostoffice.co.uk on 29 Mar 2014 at 11:39

GoogleCodeExporter commented 9 years ago
I purchased the telemetrez in 3/2014.  Yesterday I had auto tune (pixhawk) 
running on thr, and I believe was the cause of a crash:  switch somehow is 
sticky.  I noticed in MP when I turn it on/off, it either lags or dosent do 
anything.  Anyway, before I flew, I hit the switch by mistake (before arming), 
during the flight the quad behaved as I was running auto tune in stabilize mode 
(which I've done before-not pretty) anyway I've yet to analyze logs but I think 
that is what's up.  

Original comment by davidhit...@gmail.com on 30 Mar 2014 at 1:17