Enhancement for Trainer function

Reini60 / er9x

Automatically exported from code.google.com/p/er9x

0 stars 0 forks source link

Enhancement for Trainer function #745

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago

What new feature/ability do you want?
The current Trainer function only appears to support the 4 stick inputs from 
the Student Tx. It would be good if the switches could also be supported.

What is the expected output?
Students could then use other features to help them learn such as flaps and 3 
way switch settings to invoke additional units on the model such as an 
Eagletree Guardian flight stabilising unit.

What version of the product are you using?

Please provide any additional information below.

Original issue reported on code.google.com by mark.ben...@gmail.com on 8 May 2014 at 7:13

GoogleCodeExporter commented 9 years ago

All 8 possible trainer channels are supported. Channels 5 to 8 are available as 
sources in the mixers, called PPM5 to PPM8.

Original comment by michael....@mypostoffice.co.uk on 8 May 2014 at 7:36

GoogleCodeExporter commented 9 years ago

Thanks. There are loads of tutorials on setting up the basic 4 channels in the 
Trainer function but I can't find anything about how to set up the switches via 
the mixer. Do you know of any links please?

Original comment by mark.ben...@gmail.com on 8 May 2014 at 9:16

GoogleCodeExporter commented 9 years ago

I don't know of any specific tutorials.
For help on this sort of thing, try posting on http://openrcforums.com/forum/
Quick answer, e.g. flaps on channel 5. You might have:
CH05 +100% P1
to control the flaps from pot P1.
Just add another line on channel 5:
R +100% PPM5 Switch(TRN)
This is a 'Replace' multiplex mix. When the TRN switch is ON, channel 5 will 
output the fifth channel from the student instead of your value from P1.

Original comment by michael....@mypostoffice.co.uk on 8 May 2014 at 11:49

GoogleCodeExporter commented 9 years ago

Thanks for your help. I've got this working now. I've updated this wiki fork to 
record your advice:-

http://openrcforums.com/wiki/index.php/Er9x_setup_buddy_box_Instructor/Student

Original comment by mark.ben...@gmail.com on 28 May 2014 at 6:06

GoogleCodeExporter commented 9 years ago

Original comment by michael....@mypostoffice.co.uk on 29 Aug 2014 at 10:40

Changed state: Closed