search

Reisyukaku / ReiNX

A modular Switch custom firmware
GNU General Public License v2.0
819 stars 85 forks source link

Blackscreen after ReiNX logo #139

Open fenomeno0chris opened 5 years ago

fenomeno0chris commented 5 years ago

Hi, after following the stpes on the offical ReiNX website Im stuck on a black screen. The ReiNX logo just pops out a few seconds and than its black and it doesnt boot to the homescreen.

Is there something wrong with 2.4, cause Im using a freshly formatted microSD card. Ive also tried both exFat and Fat32.

Switch Info: Version 7.0.1 Tried with hekate and reinx payload with RCMloader (by Xkit)

EmreBlkaya commented 5 years ago

Same here

Ninnteen commented 5 years ago

Try this (from ReiNX's discord)

Rotule666 commented 5 years ago

Try this (from ReiNX's discord)

It didn't work for me, had the same issue and Using Version 7.0.1 as well

It's rebooting to RCM, I am using auto RCM maybe it could be related

fotiDim commented 4 years ago

Try this (from ReiNX's discord)

Same problem here. The suggested files didn't help. Tried with both FAT32 and exFAT.

KnightMars1 commented 4 years ago

Confirmed 2.4 Renix is incompatible with 7.0.1 fw?

lookye commented 4 years ago

ReiNX 2.4 works correctly with FW7.0.1 is you set up your files fine. If you dont know how to set them up correctly, visit the guide (www.reinx.guide).

paishin commented 4 years ago

I had the same issue. Turns out it was caused by me incorrectly upgrating to the fat32 version while my sdcard was formatted to exfat. I formatted the card to fat32 and reloaded reinx files and everything booted just fine. My only issue is that now switch drains battery on standby something that did not happen on exfat.