Rem0o / FanControl.Releases

This is the release repository for Fan Control, a highly customizable fan controlling software for Windows.
Other
14.3k stars 450 forks source link

Multiple AMD Radeons speed sensor issues #2704

Open raszkiewicz opened 2 months ago

raszkiewicz commented 2 months ago

After upgrading to version 200, the speed sensor for RX 580 is not able to read values (it says there is no speed sensor), even though the previous version of the Fan Control was working fine.

FanControl

Rem0o commented 2 months ago

Nothing changed on the backend LibrehardwareMonitor for AMD gpus. Do you have ADLX enabled in sensor source? If so, uncheck it and try again.

raszkiewicz commented 2 months ago

Disabling ADLX did not help. Enabling it back throws the same error above. When I try to use the GPU curve from the Fan Control it flattens the fan curve in Adrenalin and does not take any control over the GPU fan but at least I can see the fan speed percentage on a GPU curve which is not used anyway.

On version 199 I had speed percentage displayed on the GPU control tab and I didn't need the GPU curve at all as Adrenalin was managing that (anyway, the Fan Control curve was not working on the GPU fan for some reason)

richardm1 commented 2 months ago

I lost my sensors for an AMD Polaris card after a driver upgrade. I tried everything to make them work -- the final solution was to use the Driver Cleaner utility then re-install the Radeon driver kit from scratch.

raszkiewicz commented 2 months ago

There was no driver update, it was just this application update.

Other weird behaviors for V200:

PC with RX 6600 (with disabled ADLX):

PC with RX 480 (with disabled ADLX)

raszkiewicz commented 2 months ago

Nothing changed on the backend LibrehardwareMonitor for AMD gpus. Do you have ADLX enabled in sensor source? If so, uncheck it and try again.

I have added additional info about RX 6600 and RX 480 after updating to V200