GameTec-live
commented
1 month ago https://github.com/RfidResearchGroup/ChameleonUltra/blob/main/docs/troubleshooting.md
Or you might be affected by #175
Open wintersushi opened 1 month ago
GameTec-live
commented
1 month ago https://github.com/RfidResearchGroup/ChameleonUltra/blob/main/docs/troubleshooting.md
Or you might be affected by #175
wintersushi
commented
1 month ago https://github.com/RfidResearchGroup/ChameleonUltra/blob/main/docs/troubleshooting.md
Or you might be affected by #175
I'm a little confused, if I can read the LF cards and copy it onto the Chameleon - how can it have glue blocking it and interfering with the emulation?
GameTec-live
commented
1 month ago Ah, you can read the cards... Then there being glue doesnt really make sense...
wintersushi
commented
1 month ago Ah, you can read the cards... Then there being glue doesnt really make sense...
Yeah! I can read the LF cards and get the UID with no issue but whenever I try to emulate them with the chameleon, the blue and white light will turn on while next to the sensor but nothing happens.
Only in one instance did it miraculously work, I tried hovering it over the sensor in different positions and different angles of the chameleon - maybe 1/10 times does it work for that one card.
So I'm not sure if this is stupid question, and I'm suppose to have more than the UID or steps I've missed when copying the card?
GameTec-live
commented
1 month ago Nope, that seems to be correct... probably a modulation issue or similar like in #175 then...
Nextery
commented
1 month ago Ah lucky one. I can read LF cards only on 1.0 firmware, but UID is always 00000000. On 2.0 I’m getting an error “No card found, try to move Chameleon on card”
kayantoast
commented
1 week ago Ah lucky one. I can read LF cards only on 1.0 firmware, but UID is always 00000000. On 2.0 I’m getting an error “No card found, try to move Chameleon on card”
I just got the Chameleon ultra as well an am facing this exact same issue. Any solutions for this so far?
whywilson
commented
1 week ago Ah lucky one. I can read LF cards only on 1.0 firmware, but UID is always 00000000. On 2.0 I’m getting an error “No card found, try to move Chameleon on card”
I just got the Chameleon ultra as well an am facing this exact same issue. Any solutions for this so far?
Contact your seller and get the replacement of the bottom board. It will solve the issues.
Recently got a myself a Chameleon Ultra, using the Gui i was able to emulate, write and copy HF cards. Although, all of the LF rfid cards i have tried to emulate do not seem to work. I've tried a handful of different cards, as well as updating the firmware and clearing the slots.
I am a beginner with all this but even when reading through the forums and watching videos, everyone seems to simply scan the card with the LF scanner, copy the UID and it works. I'm wondering if i'm missing something or if anyone has experienced anything similar and could help resolving this issue?