Closed nocomp closed 3 years ago
Please add your output from
hw status
hw version
And if you got some compilation errors when you compiled and flashed fullimage.
hi @iceman1001 thxx a lot for yoru reactivity. here we go
[usb] pm3 --> hw status
[#] Memory
[#] BigBuf_size.............42124
[#] Available memory........39816
[#] Tracing
[#] tracing ................0
[#] traceLen ...............39812
[#] dma8 memory.............-2112044
[#] dma16 memory............-2112044
[#] toSend memory...........39816
[#] Current FPGA image
[#] mode.................... HF image built for 2s30vq100 on 2020-07-08 at 23: 8:19
[#] Flash memory
[#] Baudrate................24 MHz
[#] Init....................OK
[#] Memory size.............2 mbits / 256 kb
[#] Unique ID...............0xD567A882A74AA925
[#] Smart card module (ISO 7816)
[#] version.................v3.10
[#] LF Sampling config
[#] [q] divisor.............95 ( 125.00 kHz )
[#] [b] bits per sample.....8
[#] [d] decimation..........1
[#] [a] averaging...........Yes
[#] [t] trigger threshold...0
[#] [s] samples to skip.....0
[#] LF Sampling Stack
[#] Max stack usage.........4016 / 8480 bytes
[#] LF T55XX config
[#] [r] [a] [b] [c] [d] [e] [f] [g]
[#] mode |start|write|write|write| read|write|write
[#] | gap | gap | 0 | 1 | gap | 2 | 3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) | 29 | 17 | 15 | 47 | 15 | N/A | N/A |
[#] long leading reference |N/A | N/A | N/A | N/A | N/A | N/A | N/A |
[#] leading zero |N/A | N/A | N/A | N/A | N/A | N/A | N/A |
[#] 1 of 4 coding reference |N/A | N/A | N/A | N/A | N/A | N/A | N/A |
[#]
[#] HF 14a config
[#] [a] Anticol override....0 ( No ) follow standard
[#] [b] BCC override........0 ( No ) follow standard
[#] [2] CL2 override........0 ( No ) follow standard
[#] [3] CL3 override........0 ( No ) follow standard
[#] [r] RATS override.......0 ( No q follow standard
[#] Transfer Speed
[#] Sending packets to client...
[#] Time elapsed............500ms
[#] Bytes transferred.......283648
[#] Transfer Speed PM3 -> Client = 567296 bytes/s
[#] Various
[#] Max stack usage.........4096 / 8480 bytes
[#] DBGLEVEL................1 ( ERROR )
[#] ToSendMax...............10
[#] ToSend BUFFERSIZE.......2308
[#] Slow clock..............31956 Hz
[#] Installed StandAlone Mode
[#] HF - Reading Visa cards & Emulating a Visa MSD Transaction(ISO14443) - (Salvador Mendoza)
[#] Flash memory dictionary loaded
[usb] pm3 --> hw version
[ Proxmark3 RFID instrument ]
[ CLIENT ]
client: RRG/Iceman/master/v4.9237-1690-gdcc33d59 2020-10-12 08:46:24
compiled with GCC 7.5.0 OS:Linux ARCH:x86_64
[ PROXMARK3 ]
firmware.........................PM3RDV4
external flash...................present
smartcard reader.................present
FPC USART for BT add-on..........absent
[ ARM ]
bootrom: RRG/Iceman/master/v4.9237-1690-gdcc33d59 2020-10-12 08:46:47
os: RRG/Iceman/master/v4.9237-1690-gdcc33d59 2020-10-12 08:46:59
compiled with GCC 6.3.1 20170620
[ FPGA ]
LF image built for 2s30vq100 on 2020-07-08 at 23: 8: 7
HF image built for 2s30vq100 on 2020-07-08 at 23: 8:19
HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23: 8:30
[ Hardware ]
--= uC: AT91SAM7S512 Rev A
--= Embedded Processor: ARM7TDMI
--= Nonvolatile Program Memory Size: 512K bytes, Used: 295848 bytes (56%) Free: 228440 bytes (44%)
--= Second Nonvolatile Program Memory Size: None
--= Internal SRAM Size: 64K bytes
--= Architecture Identifier: AT91SAM7Sxx Series
--= Nonvolatile Program Memory Type: Embedded Flash Memory
[usb] pm3 -->
thxx a lot
hi, just noticed i can t get the tag info, as i get from classic pm3 device. getting HID H10301 instad of something like 1cca045555 [usb] pm3 --> lf hid read 1 [+] [H10301] - HID H10301 26-bit; FC: 74 CN: 3880 parity: valid [usb] pm3 -->
yes, this repo has different output for that command than the official repo.
hi, so my device is not faulty, just normal behavoiur? thank you for your time
what should i do in order to get this working with this repo ? https://www.tinker.sh/badge-cloning-clone-hid-prox-with-proxmark3-rvd4/
do i need another repo for that? best regards
This is not an issue with the fw, it seems you have more of a user issue. Ask questions on forum or on discord.
Regarding standalone modes, I suggest you start reading the docs,
ref:
https://github.com/RfidResearchGroup/proxmark3/wiki/Standalone-mode
https://github.com/RfidResearchGroup/proxmark3/blob/master/armsrc/Standalone/readme.md
Thxx , already had a look, teying to figure out why it used to work and now since i ve flashed last version, doesnt work any more. Am i using wrong repo? Doesnt seems to :/ Thx for your help
I can tell you haven't followed instructions on for your RDV4, not that it will change your current problems with standalone mode, but it will weed out other potential issues.
hi folks, i run a pm3 rdv4 , flashedit with lass firmware, no issues what so ever. when i see other ppl hw tune data in other post, i can see that mine are totally exotic:
any idea what can be wrong?
thx for your time