Em410x emulation not working

RfidResearchGroup / proxmark3

Iceman Fork - Proxmark3

http://www.icedev.se

GNU General Public License v3.0

3.72k stars 998 forks source link

Closed Fonteno closed 7 months ago

Fonteno commented 8 months ago

Reading and cloning works fine. But emulation is not working for em4100 cards. It says simulating but the reader is not picking anything.

piotrva commented 7 months ago

What type of hardware do you have? There are is lot of hardware on the market that is flawed unfortunately

iceman1001 commented 7 months ago

I just used the pm3 to simulate EM4100 against a Chameleon Ultra (CU). The CU didn't have any issue reading the simulated tag.

You will need to add details on how to replicate your issue.

piotrva commented 7 months ago

I am simulating both 125kHz and 13.56 MHz using Proxmark3 RDV without any issue. However there is Proxmark3 Easy:

I received one unit with a missing driver IC (so it was the reason why I was unable to run any simulation)
It was replaced by a seller and I got unit with all IC correctly populated. However only simulation of 125 KHz worked - 13.56 MHz was still not functioning.

So in this situation I assume @Fonteno might have similar hardware issue.

iceman1001 commented 7 months ago

OK,
Thanks for clarifying.

Closing since its a hardware issue.