search

RfidResearchGroup / proxmark3

Iceman Fork - Proxmark3
http://www.icedev.se
GNU General Public License v3.0
4.01k stars 1.05k forks source link

Help debugging crash on sniffing hitag #551

Open bosb opened 4 years ago

bosb commented 4 years ago

Describe the bug use command "lf hitag sniff" go to reader with proxmark rdv4 via USB and token hitag S token is accepted by reader proxmark lights 2 red leds trying to get log: "lf hitag list" -> nothing, communication error I need to unplug proxmark to get it working again :-(

[usb] pm3 --> lf hitag sniff
#db# Starting Hitag2 sniffing
[usb] pm3 -->
[usb] pm3 --> lf hitag list
Waiting for a response from the Proxmark3...
You can cancel this operation by pressing the pm3 button
[-] Timed out while trying to download data from device
[!] timeout while waiting for reply.
[!] Communicating with Proxmark3 device failed
[=] Running in OFFLINE mode. Use "hw connect" to reconnect

[offline] pm3 --> hw connec
[=] Using UART port /dev/tty.usbmodemiceman1
[=] Communicating with PM3 over USB-CDC

What are my possibilities to figure out where/why it crashed?

iceman1001 commented 4 years ago

its crashing since I am reworking the hitag code. You could go back to old versions before the hitag changes, then it was working.

bosb commented 4 years ago

ups, indeed, switched back to the android app compatible one from 2019-08-12

cosmo6110 commented 4 years ago

bosb I tried this version and it worked e5a1861 2020/01/14, before "hitag signal refactoring"

Zorro9999 commented 4 years ago

Good evening. Unfortunately, in all versions compiled for 64x-bit systems, the LF hitag sniff read mode could not be started, it allegedly starts, but when trying to read the log with the trace list command, a reconnect with the device occurs. [Proxmark3 RFID instrument]

 [CLIENT]
  client: RRG / Iceman / master / v4.9237-618-g84a49bf0 2020-07-23 22:32:27
  compiled with MinGW-w64 9.3.0 OS: Windows (64b) ARCH: x86_64

 [PROXMARK3]

 [ARM]
  bootrom: RRG / Iceman / master / v4.9237-618-g84a49bf0 2020-07-23 22:32:11
       os: RRG / Iceman / master / v4.9237-537-gac12a892 2020-06-29 13:37:15
  compiled with GCC 9.2.1 20191025 (release) [ARM / arm-9-branch revision 277599]

 [FPGA]
  LF image built for 2s30vq100 on 2020-02-22 at 12:51:14
  HF image built for 2s30vq100 on 2020-01-12 at 15:31:16

 [Hardware]
  - = uC: AT91SAM7S512 Rev B
  - = Embedded Processor: ARM7TDMI
  - = Nonvolatile Program Memory Size: 512K bytes, Used: 226976 bytes (43%) Free: 297312 bytes (57%)
  - = Second Nonvolatile Program Memory Size: None
  - = Internal SRAM Size: 64K bytes
  - = Architecture Identifier: AT91SAM7Sxx Series
  - = Nonvolatile Program Memory Type: Embedded Flash Memory

an older version PM3-RRG-Compiled-20190707 works fine