Closed keenanjohnson closed 1 year ago
Oh no! Yep, that's a tight fit. We could either just clip the corner of that support, or cut a notch.
Making the notch would remove the stress from the lid on those and it wouldn't increase the size of the enclosure either, I think that could be the most optimal solution
Added two small notches for cable routing. One notch on the base, one on the shroud.
Adding a couple pictures to show the results:
I like it!
On Fri, Jun 2, 2023 at 7:42 AM Eric Audiffred @.***> wrote:
Adding a couple pictures to show the results: [image: image] https://user-images.githubusercontent.com/88562047/242914655-2aa874b8-daa9-40b1-9ec4-ce79cf6cf7b6.png [image: image] https://user-images.githubusercontent.com/88562047/242915268-a6f9b78d-8111-435d-8b28-1288d469a5d5.png
— Reply to this email directly, view it on GitHub https://github.com/Ribbit-Network/ribbit-network-frog-hardware/issues/210#issuecomment-1573851576, or unsubscribe https://github.com/notifications/unsubscribe-auth/AATQ3FSLN3ABPYV6BNX6LVDXJH3VRANCNFSM6AAAAAAWEOU6TE . You are receiving this because you authored the thread.Message ID: @.*** com>
When looking at the finished sensors after our workshop, a small number had squished sensor cables as shown which prevented them from working correctly.